Search results for "switch"
showing 10 items of 467 documents
Determination of third-order nonlinear optical properties of ABI derivatives
2019
This material is based upon work supported by the ERDF 1.1.1.1 activity project Nr. 1.1.1.1/16/A/046 “Application assessment of novel organic materials by prototyping of photonic devices”.
Q-switched mode locking noise-like pulse generation from a thulium-doped all-fiber laser based on nonlinear polarization rotation
2021
Abstract Q-switched mode locking (QML) noise-like pulse (NLP) emission from an all-fiber thulium-doped laser based on the nonlinear polarization rotation effect is reported. The QML emission is obtained in a cavity with net anomalous dispersion in a pump power interval in between the CW laser threshold and the threshold of the NLP regime. Highest-energy QML pulses were observed with a repetition rate of 812 kHz with a pump power of 520 mW at the optical wavelength of 1881.09 nm. A maximum overall energy of 460 nJ at an average output power of 6.4 mW was reached, which corresponds to a burst of mode-locked noise-like sub-pulses with 8.7 ns of pulse duration within a QML envelope of 11 µs. Th…
The Mu3e Data Acquisition
2020
The Mu3e experiment aims to find or exclude the lepton flavour violating decay $\mu^+\to e^+e^-e^+$ with a sensitivity of one in 10$^{16}$ muon decays. The first phase of the experiment is currently under construction at the Paul Scherrer Institute (PSI, Switzerland), where beams with up to 10$^8$ muons per second are available. The detector will consist of an ultra-thin pixel tracker made from High-Voltage Monolithic Active Pixel Sensors (HV-MAPS), complemented by scintillating tiles and fibres for precise timing measurements. The experiment produces about 100 Gbit/s of zero-suppressed data which are transported to a filter farm using a network of FPGAs and fast optical links. On the filte…
Long-wavelength monolithic GaInNAs vertical-cavity optical amplifiers
2004
We report on the continuous-wave amplification characteristics of an optically pumped 1.3-μm multiple-quantum-well GaInNAs-GaAs vertical-cavity semiconductor optical amplifier (VCSOA). The VCSOA structure was monolithically grown by molecular beam epitaxy and operated in reflection mode in a fiber-coupled system. The maximum on-chip gain attained, limited by the onset of laser action, was 15.6 dB at 196 mW of 980-nm pump power. For a chip gain of 10.4 dB, the optical bandwidth was 10.8 GHz and the saturation output power was -9 dBm. By varying the pump laser power, a maximum extinction ratio of 22.3 dB was obtained. Temperature-controlled tuneable operation of the device is also presented a…
Transform-limited pulses generated by an actively Q-switched distributed fiber laser.
2008
A single-mode, transform-limited, actively Q-switched distributed-feedback fiber laser is presented, based on a new in-line acoustic pulse generator. Our technique permits a continuous adjustment of the repetition rate that modulates the Q factor of the cavity. Optical pulses of 800 mW peak power, 32 ns temporal width, and up to 20 kHz repetition rates were obtained. The measured linewidth demonstrates that these pulses are transform limited: 6 MHz for a train of pulses of 10 kHz repetition rate, 80 ns temporal width, and 60 mW peak power. Efficient excitation of spontaneous Brillouin scattering is demonstrated.
Design and implementation of a portable fNIRS embedded system
2015
We report on the design, development and operation of a portable, low cost, battery-operated, multi-channel, functional Near Infrared Spectroscopy embedded system, hosting up to 64 optical sources and 128 Silicon PhotoMultiplier optical detectors. The system is realized as a scalable architecture, whose elementary leaf consists of a probe board provided with 16 SiPMs, 4 couples of bi-color LED, and a temperature sensor, built on a flexible stand. The hardware structure is very versatile because it is possible to handle both the switching time of the LED and the acquisition of the photodetectors, via an ARM based microcontroller.
Active plasmonics in WDM traffic switching applications
2012
With metal stripes being intrinsic components of plasmonic waveguides, plasmonics provides a "naturally" energy-efficient platform for merging broadband optical links with intelligent electronic processing, instigating a great promise for low-power and small-footprint active functional circuitry. The first active Dielectric-Loaded Surface Plasmon Polariton (DLSPP) thermo-optic (TO) switches with successful performance in single-channel 10 Gb/s data traffic environments have led the inroad towards bringing low-power active plasmonics in practical traffic applications. In this article, we introduce active plasmonics into Wavelength Division Multiplexed (WDM) switching applications, using the …
Q switching and mode locking pulse generation from an all-fiber ring laser by intermodal acousto-optic bandpass modulation
2018
Q-switched and mode-locked (QML) pulse generation from an all-fiber ring laser based on intermodal acousto-optic bandpass modulation is reported. The modulator relies on full-acousto-optic mode re-coupling cycle induced by a standing flexural acoustic wave, with a transmission response that is controlled by amplitude modulation of the acoustic wave signal. The Q factor of the cavity is controlled by a rectangular pulse wave with variable frequency and duty cycle, whereas mode locking is achieved by amplitude modulation derived from a standing flexural acoustic wave. The best QML pulses were obtained at 0.5 kHz repetition rate, with a pump power of 549.2 mW, at the optical wavelength of 1568…
Enhanced supercontinuum generation in the nanosecond pump regime using specialty microstructured fibers
2009
Several alternatives have been investigated to achieve enhanced supercontinuum generation in the nanosecond pump regime using specialty silica-based microstructured optical fibers (MOFs). Among these alternatives we can point out the use of (a) MOF tapers, (b) highly Ge-doped core Y-shaped MOF and (c) Er-doped MOF. These specialty MOFs provide either an increased material nonlinear response or a rather small effective area, at the same time that the dispersion characteristics are adjusted to work at different excitation conditions. In our experiments, we have been using either a Q-switched Nd:YAG laser (10 Hz repetition rate) or an Yb-doped fiber laser (2 kHz repetition rate), both emitting…
Supercontinuum Q-switched Yb fiber laser using an intracavity microstructured fiber
2009
We report on an intracavity configuration for supercontinuum generation in a Q-switched Yb fiber laser. The supercontinuum laser includes a section of microstructured fiber within the Q-switched laser cavity. With 380 mW of pump power, the supercontinuum laser can emit broadband pulses of 6 microJ energy and 10 ns temporal width, at repetition rates from few hertz up to 2 kHz. The supercontinuum spectrum spans over a wavelength range in excess of 1.4 microm.