Search results for "turbine"
showing 10 items of 198 documents
A Bond Graph Approach to Modeling and Simulation of Nonlinear Wind Turbine System
2013
This chapter addresses the problem of bond graph methodology as a graphical approach for modeling of wind turbine generating systems. The purpose of this chapter is to show some of the benefits of the bond graph approach in contributing a model for wind turbine systems. We will present a nonlinear model of a wind turbine generating system, containing pitch, drive train, tower motion and generator. All which will be modeled by means of bond graph. We will especially focus on the drive train, and show the difference between modeling with a classical mechanical method and by using bond graph. The model consists of realistic parameters, but we are not trying to validate a specific wind turbine …
Design, modelling, and analysis of a large floating dock for spar floating wind turbine installation
2020
Installation of floating wind turbines at the offshore site is a challenging task. A significant part of the time efficiency and costs are related to the installation methods which are sensitive to weather conditions. This study investigates a large floating dock concept, which can be used to shield a floating wind turbine during installation of tower, nacelle, and rotor onto a spar foundation. In this paper, the concept is described in detail, and a design optimisation is carried out using simple design constraints. Hydrodynamic analysis and dynamic response analysis of the coupled system of the optimum dock and spar are conducted. Two spars of different sizes are considered, and the motio…
Structural Safety Assessment of Marine Operations From a Long-Term Perspective: A Case Study of Offshore Wind Turbine Blade Installation
2019
Abstract A marine operation is a complex non-routine activity of limited duration carried out in offshore environment. Due to safety reasons, these operations are normally performed within specific sea state limits, which are derived from numerical modelling and analysis of hazardous events. In view of the uncertainties in the assessment of structural responses under stochastic environmental conditions, these limiting curves correspond to a target structural failure probability recommended in offshore standards (for example, 10−4 per operation as specified by DNV-GL). However, one of the main limitations is that these curves do not reflect site-specific safety assessment. The current paper …
Numerical study of a concept for major repair and replacement of offshore wind turbine blades
2020
Repair and replacement of offshore wind turbine blades are necessary for current and future offshore wind turbines. To date, repair activities are often conducted using huge jack-up crane vessels and by applying a reverse installation procedure. Because of the high costs associated with installation and removal of offshore wind turbine components and the low profit margin of the offshore wind industry, alternative methods forinstallation and removal are needed. This paper introduces a novel concept for replacement or installation of offshore windturbine blades. The concept involves a medium-sized jack-up crane vessel and a tower climbing mechanism. This mechanism provides a stable platform …
Effect of a Passive Tuned Mass Damper on Offshore Installation of a Wind Turbine Nacelle
2021
Abstract Although the installation of offshore wind turbines takes place in calm seas, successful mating of wind turbine components can be challenging due to the relative motions between the two mating parts. This work investigates the effect of a passive tuned mass damper on the mating processes of a nacelle for a 10-megawatt (MW) offshore wind turbine. A nacelle with lifting wires and a monopile with a mass damper are respectively modelled using the multibody formulation in the HAWC2 program. A single mass damper is tuned to target at the first natural period of the monopile and is coupled to the main program using a dynamic link library. Afterwards, numerical simulations were carried out…
Banki-Michell Optimal Design by Computational Fluid Dynamics Testing and Hydrodynamic Analysis
2013
In hydropower, the exploitation of small power sources requires the use of small turbines that combine efficiency and economy. Banki-Michell turbines represent a possible choice for their simplicity and for their good efficiency under variable load conditions. Several experimental and numerical tests have already been designed for examining the best geometry and optimal design of cross-flow type machines, but a theoretical framework for a sequential design of the turbine parameters, taking full advantage of recently expanded computational capabilities, is still missing. To this aim, after a review of the available criteria for Banki-Michell parameter design, a novel two-step procedure is de…
Performance improvement of a novel combined water turbine
2020
Abstract Nowadays, industrials and researchers are looking for renewable energy resources due to the increase of energy demand. Recently, the ability of combined turbines in harnessing energy from water current has increased their renewed interest. However, there still exist a big knowledge gap to select the optimal design of these turbines. In this paper, systematic studies of stand-alone helical Savonius and delta bladed Darrieus turbines were carried out using experimental methods as a precursor to analyze their roles in hybrid configuration. By varying the attachment angle, two hybrid configurations were tested experimentally. Using the optimal attachment angle, six hybrid configuration…
Impeller optimization in crossflow hydraulic turbines
2021
Crossflow turbines represent a valuable choice for energy recovery in aqueducts, due to their constructive simplicity and good efficiency under variable head jump conditions. Several experimental and numerical studies concerning the optimal design of crossflow hydraulic turbines have already been proposed, but all of them assume that structural safety is fully compatible with the sought after geometry. We show first, with reference to a specific study case, that the geometry of the most efficient impeller would lead shortly, using blades with a traditional circular profile made with standard material, to their mechanical failure. A methodology for fully coupled fluid dynamic and mechanical …
Modelling and optimization of a passive structural control design for a spar-type floating wind turbine
2014
Abstract Compared with fixed-bottom installation, deep water floating wind turbine has to undergo more severe structural loads due to extra degrees of freedom. Aiming for effective load reduction, this paper deals with the evaluation of a passive structural control design for a spar-type floating wind turbine, and the proposed strategy is to install a tuned mass damper (TMD) into the spar platform. Firstly, a mathematical model for wind turbine surge-heave-pitch motion is established based on the D’Alembert’s principle of inertial forces. Then, parameter estimation is performed by comparing the outputs from the proposed model and the state-of-the-art simulator. Further, different optimizati…
On the use of a laboratory-scale Pelton wheel water turbine in renewable energy education
2008
Abstract A laboratory-scale Pelton turbine for hydroelectric generation has been constructed and used in the educational curriculum of The Renewable Energy Programme at the University of Jyvaskyla. The construction of the Pelton turbine, the experimental apparatus and the measurement procedure are described. The apparatus is simple to make and uses inexpensive components, most of which can be found in standard science laboratories. From the experimental results, the turbine was found to have a maximum mechanical efficiency of 0.47 ± 0.02 for a water flow rate of 0.17 l / s . The Pelton turbine and apparatus demonstrate the principles of hydropower and are well suited for education in renewa…