Search results for "ultrasonics"
showing 10 items of 326 documents
Effects of 5 MeV electron irradiation on deep traps and electroluminescence from near-UV InGaN/GaN single quantum well light-emitting diodes with and…
2020
The electrical properties, electroluminescence (EL) power output and deep trap spectra were studied before and after 5 MeV electron irradiation of near-UV single-quantum-well (SQW) light-emitting diodes (LED) structures differing by the presence or absence of InAlN superlattice underlayers (InAlN SL UL). The presence of the underlayer is found to remarkably increase the EL output power and the radiation tolerance of LEDs, which correlates with a much lower and more slowly changing density of deep traps in the QW region with radiation dose, and the higher lifetime of charge carriers, manifested by higher short-circuit current and open-circuit voltage in current–voltage characteristics under …
Acoustics of porous materials with partially opened porosity
2013
International audience; A theoretical and experimental study of the acoustic properties of porous materials containing dead-end (or partially opened) porosity was recently proposed by Dupont et al. The present article provides a description of partially opened porosity systems and their numerous potential applications in the general context of the study of porous materials, the classical models describing them, and the characterization techniques. It is shown that the dead-end pore effect can be treated independently and that the description of this effect can be associated with any acoustic model of porous media. Different theoretical developments describing the dead-end porosity effect ar…
Application of low intensity ultrasonics to cheese manufacturing processes.
2002
Ultrasound has been used to non-destructively assess the quality of many foods such as meat, fish, vegetables and dairy products. This paper addresses the applications of low intensity ultrasonics in the cheese manufacturing processes and highlights the areas where ultrasonics could be successfully implemented in the future. The decrease of ultrasonic attenuation during the renneting process can be used to determine the optimum cut time for cheese making. The ultrasonic velocity increases during maturation for those types of cheese that become harder during this manufacturing stage, thus being an indicator of the maturity degree. Moreover, ultrasonic measurements could be linked to sensory …
Influence of modification time and high frequency ultrasound irradiation on self-assembling of alkylphosphonic acids on stainless steel : electrochem…
2015
International audience; Self-assembly of alkylphosphonic acids on stainless steel was investigated under different conditions. Four different alkylphosphonic acids exhibiting alkyl chain of various size were synthesized and studied: butylphosphonic acid (C4P), octylphosphonic acid (C8P), decylphosphonic acid (C10P), and hexadecylphosphonic acid (C16P). Electrochemistry experiments were extensively carried out in order to determine electrochemical surface blocking of adsorbed layers in function of grafting time. In term of surface blocking, an 8h modification time was optimal for all alkylphosphonic acids. Longer immersion times lead to degradation of adsorbed layers. For the first time, gra…
Non-radiative recombination centres in catalyst-free ZnO nanorods grown by atmospheric-metal organic chemical vapour deposition
2013
We have investigated the cathodoluminescence (CL) emission and the Raman spectra along individual ZnO nanorods grown by a catalyst-free method. The spatial correlation between the CL emission and the defect related Raman modes permits establishing a correspondence between the non-radiative recombination centres (NRRCs) and the defects responsible for the 275 cm−1 Raman band. According to this relation, the NRRCs in these nanorods are tentatively associated with complexes of zinc interstitials.
Laser ultrasonics for defect evaluation on coated railway axles
2020
Abstract This scientific paper focuses on the application of an advanced non-destructive technique for an effective inspection of railway axles. The method pertains to ultrasonic techniques, which are widely used in the railway field. The experimental investigation was carried out on simulated defects tooled near the cross section reduction of the axle, in order to simulate fatigue cracks which, due to notch effect, can trigger crack propagation and axle failure. The aim of this research activity is to evaluate how efficiently the proposed technique detects defects and to verify its applicability to axles with a black coating for protection. In view of the experimental setup, comprising a p…
Effect of cavity preparation instruments (oscillating or rotating) on the composite-dentin interface in primary teeth.
2003
Abstract Objectives: To evaluate the effect of preparation of instruments on the interfacial integrity between cavity wall and composite restoration. Methods: Two class II slot preparations were done in 10 primary teeth either with SonicSys® or with a conventional bur. The cavities were filled using an adhesive system. One layer of a flowable composite and one layer of a condensable composite were applied. The specimens were analyzed by confocal laser scanning microscopy. Results: In the SonicSys® group the mean thickness of the hybrid layer was 6.12 (0.60) μm; in the control group it was 6.04 (0.63) μm. The difference was not statistically significant. Two fractures were observed in one to…
Influence of cavity preparation technique (rotary vs. ultrasonic) on microleakage and marginal fit of six end-root filling materials
2010
Objectives: To evaluate in vitro the effect of cavity preparation with microburs and diamond-coated ultrasonic tips on the microleakage and marginal fit of six end-root filling materials. Study Design. The following materials were assessed: amalgam (Amalcap), zinc oxide eugenol (IRM), glass ionomer (Vitrebond), compomer (Cavalite), mineral particle aggregate (MTA) and composite (Clearfil). Cavity preparation was performed with microburs or diamond ultrasonic tips in single-root teeth. The seal was evaluated in two experiments: a microleakage assay on the passage of dye to the interface; and a scanning electron microscopy study and analysis of epoxy resin replicas, measuring the size of gaps…
Solvent-tuned ultrasonic synthesis of 2D coordination polymer nanostructures and flakes
2021
Highlights • Combined ultrasound and solvent assisted synthesis of 2D coordination polymers. • Role of interstitial solvent molecules in the delamination of 2D-CPs. • Influence of the sonication time in delamination and nanostructuration processes. • Morphological and supramolecular transformations in 2D-CPs.
Delamination of 2D coordination polymers : the role of solvent and ultrasound
2019
Two novel cadmium-based 2D coordination polymers have been synthesized and characterized. Experimental results evidence that the best delamination processes occurs when weak interactions dominate the cohesion between layers and solvent molecules are occluded within the crystalline network. In this case, the delamination of the crystals occurs spontaneously in water. On top of that, and thanks to the high stability of the resulting (flake) colloidal dispersions, we have completed a detailed study of the sonication assisted delamination impact by: I) comparison of two different sonication approaches (bath vs. tip sonication) and II) optimization of final flake morphology and yield by controll…