Search results for "visual_art"
showing 10 items of 2987 documents
Structural Characterization of the “Knitting Pattern” in Polystyrene-block-poly(ethylene-co-butylene)-block-poly(methyl methacrylate) Triblock Copoly…
1998
In a polystyrene-block-polybutadiene-block-poly(methyl methacrylate) triblock copolymer (SBM) a morphological transition from a lamellar (ll) morphology (with sequence ABCB) to the knitting pattern (kp) morphology occurs upon hydrogenation of the center PB block. Structural information of the nonhydrogenated and the hydrogenated material is provided from small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). For the nonhydrogenated SBM sample the SAXS profile correlates well with a simple periodic lamellar structure. The hydrogenated sample forming the kp morphology displays a more complex SAXS pattern. From the TEM images of the knitting pattern the two-dimensional…
Effect of a Compatibilizer on the Morphology and Properties of Polypropylene/Polyethylentherephthalate Spun Fibers
2017
Fibers spun by melt spinning of binary and ternary polypropylene/ polyethylenetherephthalate blends have been produced and characterized in order to investigate the effect of a compatibilizer on their morphology and mechanical properties. The compatibilizer was a maleic anhydride-functionalized rubber copolymer. The effect of the compatibilizer was well evident in the isotropic state, as the morphology became very fine, the size of the dispersed particles was very small, and the adhesion was better. The effect of the compatibilizer on the mechanical properties is very relevant, especially in the elongation at break. On the contrary, no relevant effect was observed in the anisotropic oriente…
The effect of introduction of montmorillonite clay (MMT) on the elastic properties of polycarbonate (PC) composition with acrylonitrile-butadiene sty…
2015
Abstract Polycarbonate (PC)/acrylonitrile–butadiene–styrene terpolymer (ABS)/montmorillonite (MMT) nanocomposites have been obtained by melt compounding in a twin-screw extruder. Structural and elastic properties have been characterized. The theoretical analysis of the elastic properties of PC/ABS/MMT composite with a widely varied number of elementary layers in clay filler particles has been performed in order to estimate the influence of the degree of exfoliation of particles on the effect of reinforcement of the material. Results of the theoretical analysis have been compared with the experimental data about the effects of unmodified and two types of organically modified montmorillonite …
Impact of the inclusion of hydrotalcite on the morphological and electrical characteristics of an epoxy-based CNT nanocomposite
2012
The experimental results concerning the correlation between morphological and electrical characteristics of a MWCNT/epoxy based composites are presented. The impact of a nanoclay filler is investigated on the DC conductivity of a matrix loaded with different concentrations of MWCNT in order to evaluate the improvements on the dispersion of CNT inside the epoxy matrix. The dispersion is deemed to be very influencing on the electrical conductivity of the nanocomposite. A detailed morphological and structural characterization allows to interpret the electrical behaviour of the nanocomposites. © 2012 IEEE.
Synthesis and properties of magnetic iron oxide/platinum nanocomposites
2015
Iron oxide/platinum nanocomposites have been synthesized by the extractive-pyrolytic method (EPM) involving gradual decomposition of iron capronate and n-trioctylammonium hexachloroplatinate initially produced by solvent extraction. The content of platinum in the composites was 1.2 wt%, 2.4 wt% and 4.8 wt%. Phase composition, morphology and magnetic properties of the produced materials were investigated. XRD analysis and magnetic measurements show that the magnetic phase (magnetite Fe3O4) dominates in a carrier sample produced by the pyrolysis of iron carboxylate, but hematite α-Fe2O3 exists there as an admixture. Referring to the TEM results, the produced composites contain ultra-disperse …
Ceramic/metal nanocomposites by lyophilization: Processing and HRTEM study
2012
5 páginas, 8 figuras, 1 tabla.-- El pdf del artículo es el manuscrito de autor.
Electrochemical deposition of polypyrrole nanolayers on discontinuous ultrathin gold films.
2008
Ultrathin layers of polypyrrole (PPy) were electrochemically grown between microelectrodes on a $Si/SiO_2$ substrate. Conducting nanolayers of PPy are directly grown onto ultrathin discontinuous gold (Au) film between the microelectrodes, with thicknesses in the range 10–100 nm. The system therefore forms a novel (PPy/Au) nanocomposite conductor. Atomic force microscopy (AFM) imaging and conductivity measurements indicate that at all thicknesses a relatively uniform film is formed but with significant roughness that reflects the roughness of the metallic island layer. In PPy/Au films with thickness $\sim 10 nm$, the small barriers around the gold islands dominate the conduction, and as the …
Synthesis and Properties of Amine-Cured Epoxy/Organophilic Layered Silicate Nanocomposites
2009
Epoxy-layered silicate composites have been prepared by dispersing an organically modified montmorillonite (Nanofil 919) in an epoxy resin and curing in the presence of an aromatic hardener. Dispersion of the layered silicate within the epoxy matrix was verified using X-ray diffraction and transmission electron microscopy revealing that interaction improves upon organic silicate modification. Flexural properties and toughness increase with the organic silicate loading whereas glass transition temperature decreases and thermal stability remains practically unmodified.
Real time polymer nanocomposites-based physical nanosensors: theory and modeling.
2017
Functionalized carbon nanotubes and graphene nanoribbons nanostructures, serving as the basis for the creation of physical pressure and temperature nanosensors, are considered as tools for ecological monitoring and medical applications. Fragments of nanocarbon inclusions with different morphologies, presenting a disordered system, are regarded as models for nanocomposite materials based on carbon nanoсluster suspension in dielectric polymer environments (e.g., epoxy resins). We have formulated the approach of conductivity calculations for carbon-based polymer nanocomposites using the effective media cluster approach, disordered systems theory and conductivity mechanisms analysis, and obtain…
Elastic Modulus and Thermal Conductivity of Thiolene/TiO2 Nanocomposites
2017
Metal oxide based polymer nanocomposites find diverse applications as functional materials, and in particular thiol-ene/TiO2 nanocomposites are promising candidates for dental restorative materials. The important mechanical and thermal properties of the nanocomposites, however, are still not well understood. In this study, the elastic modulus and thermal conductivity of thiol-ene/TiO2 nanocomposite thin films with varying weight fractions of TiO2 nanoparticles are investigated by using Brillouin light scattering spectroscopy and 3ω measurements, respectively. As the TiO2 weight fraction increases from 0 to 90%, the effective elastic longitudinal modulus of the films increases from 6.2 to 37…