Search results for "visual_art"
showing 10 items of 2987 documents
Vapor growth of Hg1−xCdxI2 on glass using CdTe buffer
2001
Abstract Vapor phase epitaxy (VPE) of Hg1−xCdxI2 layers on glass substrates covered by a CdTe buffer layer has been studied. The buffer layers of 2–4 μm thickness were formed by VPE using polycrystalline CdTe and Cd metal sources. The Hg1−xCdxI2 layers were grown using a (Hg1−yCdy)1−z(I2)z polycrystalline source, with a composition in the range of y=0.1–0.5 and z=0.5–0.8. Scanning electron microscopy and X-ray diffraction studies have shown that the composition and structure of Hg1−xCdxI2 layers depend strongly on the VPE conditions. Varying the growth time and source composition, it has been possible to obtain Hg1−xCdxI2 layers with the composition x in the range from approximately 0 (HgI2…
Structural and elastic properties of defect chalcopyrite HgGa2S4 under high pressure
2014
In this work, we focus on the study of the structural and elastic properties of mercury digallium sulfide (HgGa2S4) at high pressures. This compound belongs to the family of AB(2)X(4) ordered-vacancy compounds and exhibits a tetragonal defect chalcopyrite structure. X-ray diffraction measurements at room temperature have been performed under compression up to 15.1 GPa in a diamond anvil cell. Our measurements have been complemented and compared with ab initio total energy calculations. The axial compressibility and the equation of state of the low-pressure phase of HgGa2S4 have been experimentally and theoretically determined and compared to other related ordered-vacancy compounds. The pres…
Modified YBCO superconductor-ferroelectric composites: Bulk materials and thick films
1996
Bulk samples and 50–125 μm thick films of (1-x)YBa2Cu3O7−δ-xBaTiO3 (0⩽x⩽0.12 by weight) composites have been synthesized, the films being obtained by Stokes sedimentation on SrTiO3 ceramic plates and firing in oxygen by Melt Textured Growth techniques. The phase composition and texture have been studied by X-ray diffraction and microstructure. Resistance and magnetic susceptibility of prepared samples have been measured.
Pressure-restored superconductivity in Cu-substituted FeSe
2011
Copper doping of FeSe destroys its superconductivity at ambient pressure, even at low doping levels. Here we report the pressure-dependent transport and structural properties of Fe${}_{1.01\ensuremath{-}x}$Cu${}_{x}$Se with 3$%$ and 4$%$ Cu doping and find that the superconductivity is restored. Metallic resistivity behavior, absent in Cu-doped FeSe, is also restored. At the low pressure of 1.5 GPa, superconductivity is seen at 6 K for 4$%$ Cu doping, somewhat lower than the 8 K ${T}_{c}$ of undoped FeSe. ${T}_{c}$ reaches its maximum of 31.3 K at 7.8 GPa, lower than the maximum superconducting temperature in the undoped material under pressure (${T}_{c}$ max of 37 K) but still very high. X…
Mixed valence mono- and hetero-metallic grid catenanes
2015
Multicomponent self-assembly was employed to obtain, in the solid state, a series of mixed valence mono- and hetero-metallic grid catenanes, which were characterized by single crystal X-ray diffraction.
Elastic Properties of Barium Zirconate Titanate Ceramics
2011
In the paper the influence of zirconium admixture on the structure and material constants of polycrystalline ferroelectric materials BaZrxTi1-xO3 (BZT) was examined. The barium zirconate titanate samples were prepared by a conventional solid state reaction method. A single phase with perovskite structure of the samples, was identified by an X-Ray diffraction technique at room temperature. The performed EDS study revealed that the samples were perfectly sintered and the material was chemically homogeneous. The dependence of shear modulus G on sample composition is similar to the respective dependence of Young's modulus E, whereas the Poisson's ratio ν decreases with the increase in zirconium…
Analysis of the crystallization behaviour of PBT-rich PBT/PET blends under processing conditions
2007
Among the high‐performance polyesters blends PBT/PET blends are expected to exhibit remarkable properties as far as the crystallization behaviour is concerned. The solidification behaviour of a 60/40 w/w PBT/PET blend was studied in a wide range of cooling conditions, according to a Continuous Cooling Transformation (CCT) procedure developed by the authors, aiming to emulate the typical conditions encountered in polymer processing. A set of several samples characterized by an homogeneous structure was prepared by solidification from the melt through spray cooling, and the resulting structure and properties were evaluated by density, Micro Hardness (MH), Wide Angle X‐ray Diffraction (WAXD) m…
Structural, microstructural and impedance spectroscopy study of functional ferroelectric ceramic materials based on barium titanate
2013
The differences between the physical properties of barium titanate BaTiO3 and newly obtained BaHfxTi1-xO3 were identified. These ceramics were prepared by solid-phase reaction from simple oxides and carbonates using the conventional method. The structure and morphology of investigated samples were characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The application of impedance spectroscopy made possible to characterize of these materials in the terms of electrical properties.
Electron-Deficient Pyridylimines: Versatile Building Blocks for Functional Metallosupramolecular Chemistry
2017
Metallosupramolecular systems heavily rely on the correct choice of ligands to obtain materials with desired properties. Engaging this problem, we present three ligand systems and six of their mono- and dinuclear complexes, based on the subcomponent self-assembly approach using electron-deficient pyridylcarbaldehyde building blocks. The properties are examined in solution by NMR and UV-vis spectroscopy and CV measurements as well as in solid state by single crystal X-ray diffraction analysis. Ultimately, the choice of ligands allows for fine-tuning of the electronic properties of the metal centers, complex-to-complex transformations, as well as establishing distinct anion-π-interaction moti…
Differential scanning calorimetry investigation of phase transition in $BaZr_{x}Ti_{1-x}O_{3}$
2009
ABSTRACT Lead-free BaZrxTi1-xO3 (x = 0; 0.025; 0.125) ceramics have been obtained by a conventional method. A single-phase perovskite structure of the ceramics was identified by the X-ray diffraction method. EDS analysis, performed for the individual grains of the tested sample, showed a good homogeneous distribution of all elements throughout the grains. The thermal behaviour of BaZrxTi1-xO3 (x = 0; 0.025; 0.125) ceramics was studied using the Differential Scanning Calorimetry (DSC). Measurements showed the influence of Zr addition on the character of phase transition in the BaTiO3 structure. The results were compared with these ones obtained for pure BaTiO3.