Search results for "visual_art"
showing 10 items of 2987 documents
Measurements of organochloro compounds at a metal reclamation plant
1993
Abstract Kuusakoski Ltd is a metal reclamation company operating world wide. Metals recovered are mainly aluminium, copper and different steels. NaCl and KCl are used in processes. Sampling and emission analysis of PCP's, PCB's, PCDD/PCDF's and PAH's were made from seven processes at plant. Emissions indicate, that large part of chlorinated aromatic compounds are formed due to PVC-plastic in cables and car components. On the basis of this study, we suggest, that chlorinated benzenes, -naphtalens and -diphenyl ethers should also be measured in the emissions.
Determination and evaluation of cadmium, lead and nickel in greenhouse soils of Almerı́a (Spain)
2004
This study determines total levels of three (Cd, Pb and Ni) potentially toxic trace elements in western Almería (Spain) greenhouse surface soil horizons using microwave digestion; it establishes the geochemical baseline concentration, and it investigates possible relationships between soil properties and elemental concentrations. The results show that the soil concentration of these heavy metals is lower than mentioned in the European and Spanish normative, but they are higher than those reported by other authors working on agricultural soils. The obtained geochemical baseline concentrations (mg kg(-1)) were: Cd 0.4-0.8, Pb 2.5-89.9 and Ni 16.1-30.7. Using the upper baseline criterion, 88% …
Chemical composition of lipophilic extractives from grey alder (Alnus incana)
2013
The chemical composition of the lipophilic extractives in the hexane extracts from grey alder bark, knotwood, and cones has been investigated by gas chromatography and gas chromatography-mass spectrometry. The efficiency of two extraction methods was compared. The highest amount of lipophilic extractives (about 9% of o.d. material) was observed in grey alder cone, while the lowest (about 3%) was found in knotwood. The three different morphological parts of alder showed significant differences not only in the content but also in composition of extractives, namely fatty acids, triglycerides, and triterpenes. The main identified compounds were triterpenoids (lupen-3-one, lupeol, betulone, betu…
Technogenic Magnetic Particles in Alkaline Dusts from Power and Cement Plants
2012
During this study, we investigated the mineralogical characterization of technogenic magnetic particles (TMPs) contained in alkaline industrial dust and fly ash emitted by coal burning power plants and cement plants. The reaction of tested dust samples varied between values of pH 8 and pH 12. Their magnetic properties were characterized by measurement of magnetic susceptibility (χ), frequency dependence of magnetic susceptibility (χ(fd)), and temperature dependence of magnetic susceptibility. Mineralogical and geochemical analyses included scanning electron microscopy with energy dispersive spectroscopy, microprobe analysis and X-ray diffraction. The TMPs in fly ash from hard coal combustio…
Effect of surface finish on the mechanical behaviour of Dacron© 360 woven
2013
Abstract In the present paper some experimental analyses of Dacron© 360 woven with and without surface treatment are presented to evaluate the effect of this treatment on the constitutive behaviour. This woven, widely adopted in sail manufacturing, is obtained by weaving polyethylene terephthalate (PET) yarn and it shows some peculiar features due to the manufacturing process. The experimental tensile tests, clearly show the orthotropy behaviour of the material. The effect of the treatment results in a stiffer behaviour especially along the warp and bias direction and in an increment of ultimate strength in all directions.
Fabrication of zinc doped aluminium oxide/polysulfone mixed matrix membranes for enhanced antifouling property and heavy metal removal
2021
International audience; Heavy metal removal from water resources is essential for environmental protection and the production of safe drinking water. In this direction, Zinc doped Aluminium Oxide (Zn:Al2O3) nanoparticles were incorporated into Polysulfone (PSf) to prepare mixed matrix membranes for the efficient removal of heavy metals from water. These Zn:Al2O3 nanoparticles prepared by the solution combustion method have a very high surface area (261.44 m2/g) with an approximate size of 50 nm. X-ray Photoelectron Spectroscopy analysis showed that the Al and Zn were in +3 and + 2 oxidation states, respectively. Cross-sectional Scanning Electron Microscopy images revealed the finger-like mo…
Deep oxidation of pollutants using gold deposited on a high surface area cobalt oxide prepared by a nanocasting route.
2011
Gold deposited on a cobalt oxide with high surface area (138 m2 g−1), obtained through a nanocasting route using a siliceous KIT-6 mesoporous material as a hard template, has demonstrated high activity for the total oxidation of propane and toluene, and ambient temperature CO oxidation. The addition of gold promotes the activity when compared to a gold-free Co3O4 catalyst prepared using the same nanocasting technique. The enhanced catalytic activity when gold is present has been explained for the deep oxidation of propane and toluene in terms of the improved reducibility of cobalt oxide when gold is added, rather than to the intrinsic activity of metallic gold particles. The improved behavi…
Evaluation of a microclimate model for predicting the thermal behavior of different ground surfaces
2013
The microclimate model ENVI-met Version 4 was evaluated with field data in terms of the thermal behavior of different types of ground surface. A field experiment was conducted in a real construction project in Guangzhou, South China, from 29 August to 2 September in 2010. The surface types of concrete, tile, asphalt and grass were investigated. The comparison between observation and prediction was performed for both sub- and above-surface variables, including soil temperature at different depths, soil heat flux at the surface, surface temperature, and air temperature and humidity at different heights. The results show that the ENVI-met model is capable of reasonably modelling the diurnal th…
Hydrolysis rates, methane production and nitrogen solubilisation of grey waste components during anaerobic degradation.
2005
Abstract Municipal grey waste (i.e. the remaining fraction in municipal waste management systems in which putrescibles (biowaste) and other recyclables (paper, metals, glass) are source-segregated) was manually sorted into six main fractions on the basis of composition and also separated by sieving (100 mm mesh size) into two fractions, oversized and undersized, respectively. In practice, in waste management plant the oversized fraction is (or will be) used to produce refuse-derived fuel and the undersized landfilled after biological stabilisation. The methane yields and nitrogen solubilisation of the grey waste and the different fractions (all studied samples were first milled to 5 mm part…
Previous fire occurrence, but not fire recurrence, modulates the effect of charcoal and ash on soil C and N dynamics in Pinus pinaster Aiton forests.
2021
Abstract Understanding the effects of fire history on soil processes is key to characterise their resistance and resilience under future fire events. Wildfires produce pyrogenic carbonaceous material (PCM) that is incorporated into the soil, playing a critical role in the global carbon (C) cycle, but its interactions with soil processes are poorly understood. We evaluated if the previous occurrence of wildfires modulates the dynamic of soil C and nitrogen (N) and microbial community by soil ester linked fatty acids, after a new simulated low-medium intensity fire. Soils with a different fire history (none, one, two or three fires) were heat-shocked and amended with charcoal and/or ash deriv…