Search results for "volumetric"
showing 10 items of 175 documents
Storm sewer pressurization transient – an experimental investigation
2014
Pipe pressurization is examined experimentally by 144 laboratory experiments in a circular tilting pipe between two tanks, in which the transient was triggered by sudden closing of the downstream tank outlet. The experiments cover ranges of values of slope, velocity and filling ratio of the open-channel flow not explored in previous studies. Situations involving considerable air quantity and consequent intense pressure oscillations were also reproduced. Two different pressurization patterns, defined as “smooth” and “abrupt”, were observed, but only the abrupt pattern produced intense pressure oscillations. The comparison among all the abrupt pressurization surges showed how the oscillations…
PDMS membranes for feasible recovery of dissolved methane from AnMBR effluents
2020
[EN] This study aimed to evaluate the feasibility of degassing membrane (DM) technology for recovering dissolved methane from AnMBR effluents. For that purpose, a PDMS membrane module was operated for treating the effluent from an AnMBR prototype-plant, which treated urban wastewater (UWW) at ambient temperature. Different transmembrane pressures and liquid flow rates were applied for evaluating methane recovery efficiency. Maximum methane recoveries were achieved when increasing the vacuum pressure and reducing the liquid flow rate, reaching a maximum methane recovery efficiency of around 80% at a transmembrane pressure (TMP) of 0.8 bars and a treatment flow rate (Q(L)) of 50 L h(-1). The …
Comparison of Procedures to estimate Steady Flow Rate in Field Measurement of Saturated Hydraulic Conductivity by the Guelph Permeameter Method
1999
Abstract Different procedures for estimating steady flow rate during field application of the Guelph permeameter method were compared in terms of field-saturated hydraulic conductivity K fs and equilibration time t s estimates. The steady flow rate was evaluated by the slope of the linear portion of the cumulative drop in water level in the permeameter reservoir versus time plot (reference procedure) and by approximate procedures that use the first three or four consecutive values of the rate of fall of the water level equal or differing by less than a given percentage. The influence of the selected time interval between two successive readings ( Δt =2 or 10 min) at the permeameter was also…
Kinetische Analyse der Calcium-Kompartimente im Meerschweinchenherzen unter Kontrollbedingungen und Strophanthineinwirkung
1974
A quantitative analysis of myocardial Ca-metabolism was carried out on isolated, isovolumetric (10 ml/min) perfused guinea pig hearts by combined determinations of the total Ca-content and kinetics of 45Ca-efflux (collecting period 60 min) (Fig. 1). The kinetics of 45Ca-uptake was estimated by extrapolating 45Ca-efflux curves of heart muscles isotopically loaded for different times (2, 5, 10, 30 60 min) to the end of the loading-period (Fig. 2).
Numerical modeling and design of a disk-type rotating permanent magnet induction pump
2016
Abstract Electromagnetic induction pumps with rotating permanent magnets appear to be the most promising devices to transport liquid metals in high-temperature applications. Here we present a numerical methodology to simulate the operation of one particular modification of these types of pumps: a disk-type induction pump. The numerical model allows for the calculation and analysis of the flow parameters, including the pressure–flow rate characteristics of the pump. The simulations are based on an iterative fully coupled scheme for electromagnetic and hydrodynamic solvers. The developed model is verified by comparing with experimental data obtained using a Pb-Bi loop test facility, for press…
Dense jet modelling applied to the design of dense effluent diffusers
2004
A model aimed at predicting the behavior of inclined dense jets in a stagnant environment was proposed. The model takes into account four jet parameters (flow rate, density, inclination and diameter) and results in a set of algebraic and ordinary differential equations, which are easily solved by simple (standard) numerical methods. Model results include information on the trajectory, spreading and dilution of the inclined dense jets. Model predictions were compared with experimental data obtained with different nozzle diameters, jet flow rates, jet densities and nozzle inclinations. Despite the wide range encompassed by the experimental data analyzed, model predictions were always found to…
Structural-hydraulic test of the liquid metal EURISOL target mock-up
2009
Abstract Structural-hydraulic tests of the European Isotope Separation On-Line (EURISOL) neutron converter target mock-up, named MErcury Target EXperiment 1 (METEX 1), have been conducted by Paul Scherrer Institut (PSI, Switzerland) in cooperation with Institute of Physics of the University of Latvia (IPUL, Latvia). PSI proceeded with extensive thermal-hydraulic and structural computational studies, followed by the target mock-up tests carried out on the mercury loop at IPUL. One of the main goals of the METEX 1 test is to investigate the hydraulic and structural behaviour of the EURISOL target mock-up for various inlet flow conditions (i.e. mass flow rates) and, in particular, for nominal …
A laboratory experiment on inferring Poiseuille's law for undergraduate students
2006
In this paper a laboratory experiment is proposed to infer Poiseuille's law. A simple set-up based on two flasks joined by a detachable tube allows one to measure using tubes of different radii and different lengths. One of the flasks is connected to a vacuum pump to control the pressure differential between the tube extremes. The influence on the flow of different radii, lengths, pressures and viscosities can be studied in a didactic way by measuring the flow rate for each of these variables. The experiment can be performed getting together the students in groups, so that each group concentrates on the effect on the flow of a specific variable, leaving the rest fixed. After putting togethe…
Experimental studies of a single flexibly-mounted rod in a triangular rod bundle in cross-flow
2018
Experiments on flow-induced vibrations using a closely-packed triangular rod array with a pitch-todiameter ratio of 1.1 in water cross-flow was carried out at Paul Scherrer Institute. The bundle consists of 21 row of five rods in each one. Single flexibly-mounted test rod (TR) is in the fourth row in an otherwise fixed array. The test rod can freely move in the transverse and in-line direction. Two accelerometer sensors were attached at both ends of the TR to measure the rod response on the fluid flow. The effect of flow rate on the stability of the flexibly-mounted TR has been analysed. During experiments, it reveals a set of conditions and tendencies for the flow-induced vibration in the …
Numerical and experimental MHD studies of Lead-Lithium liquid metal flows in multichannel test-section at high magnetic fields
2018
Abstract Numerical simulation and experiments have been performed at high magnetic fields (1–3T) to study the MHD assisted molten Lead-Lithium (PbLi) flow in a model test-section which has typical features of multiple parallel channel flows as foreseen in various blanket module of ITER. The characteristics Hartmann number of the presented case study is up to 1557 which is relevant to typical fusion blanket conditions. Symbols B0, a, σ, μ in the definition of Hartmann number are strength of the applied magnetic field, characteristic length scale which is half the channel width parallel to the magnetic field, electrical conductivity and dynamic viscosity of PbLi respectively. Flow distributio…