Search results for "volumetric"
showing 10 items of 175 documents
Nano-hygroscopicity tandem differential mobility analyzer (nano-HTDMA) for investigating hygroscopic properties of sub-10 nm aerosol nanoparticles
2020
Interactions between water and nanoparticles are relevant for atmospheric multiphase processes, physical chemistry, and materials science. Current knowledge of the hygroscopic and related physicochemical properties of nanoparticles, however, is restricted by the limitations of the available measurement techniques. Here, we present the design and performance of a nano-hygroscopicity tandem differential mobility analyzer (nano-HTDMA) apparatus that enables high accuracy and precision in hygroscopic growth measurements of aerosol nanoparticles with diameters less than 10 nm. Detailed methods of calibration and validation are provided. Besides maintaining accurate and stable sheath and a…
Sorption-Caused Attenuation and Delay of Water Vapor Signals in Eddy-Covariance Sampling Tubes and Filters
2014
AbstractAdsorption and desorption (together called sorption) processes in sampling tubes and filters of eddy-covariance stations cause attenuation and delay of water vapor signals, leading to an underestimation of water vapor fluxes by tens of percent. The aim of this work was (i) to quantify the effects on sorption in filters and tubes of humidity, flow rate, and dirtiness and (ii) to test a recently introduced sorption model that facilitates correction of fluxes. Laboratory measurements on the transport of water vapor pulses through tubes and filters were carried out, and eddy-covariance field measurements were also used.In the laboratory measurements, the effects of sorption processes we…
CO2flux measurements in volcanic areas using the dynamic concentration method: Influence of soil permeability
2006
[1] In order to evaluate the influence of soil permeability on soil CO2 flux measurements performed with the dynamic concentration method, several tests were carried out using soils characterized by different permeability values and flow rates. A special device was assembled in the laboratory to create a one-dimensional gas flow through a soil of known permeability. Using the advective-diffusion theory, a physical model to predict soil concentration gradients was also developed. The calculated values of CO2 concentrations at different depths were compared with those measured during the tests and a good agreement was found. Four soils with different gas permeability (3.6 × 10−2 to 1.23 × 102…
Development of a membrane-less microfluidic thermally regenerative ammonia battery
2021
Thermally regenerative ammonia battery is a promising approach to make use of waste heat and generate electrical energy. However, according to literature, the price of the energy obtained by this device is much higher than alternative renewable technologies (such as wind, solar, geothermal, etc.). To make the process more viable for applicative purposes, it would be necessary to reduce dramatically the cost of the membrane or to avoid it. Hence, the aim of the present work is to increase the economic figures of thermally regenerative ammonia battery avoiding the use of membranes. It was concluded that this result can be obtained by developing the process in a microfluidic flow cell with lam…
Cadmium and Copper Removal by a Granular Activated Carbon in Laboratory Column Systems
2000
Single and competitive removal of Cd and Cu from aqueous solutions by using Darco 12–20 mesh granular activated carbon in column systems has been investigated. Seven experiments modifying the initial pH and the flow rate were performed. Results showed the efficiency of activated carbon as a sorbent for both metals. pH is shown to be the decisive parameter on metal removal in the column; metal removal increases when the influent pH value is raised. The influence of the flow rate for the experimental conditions is negligible. Batch adsorption and column data are compared. Column modeling assuming local equilibrium and rate-controlled pore diffusion was performed.
Detection of gas trace of hydrofluoric acid using microcantilever
2004
Abstract Microcantilevers have been used as a gas sensor in order to detect Hydrofluoric acid (HF) in the concentration range of 0.26–13 ppm. Silicon derived elements (Si 3 N 4 , SiO x ) were chosen to serve as chemical sensitive layer. Cantilever deflection and frequency shift were analyzed and compared as a function of the flow rate and the concentration of the HF molecules. The stoichiometry and roughness of the sensitive layer were found to be of major importance. Results show that the most appropriate signal at the lowest concentration ( x surface by HF. The frequency shift that is mainly governed by the loss in cantilever mass can be used at higher concentration.
Effects of pressure, temperature and atomic exchanges on phase separation dynamics in Au/Ni(111) surface alloy: Kinetic Monte Carlo study
2015
Abstract Instability of the Au/Ni(111) surface alloy is studied in different CO gas pressure, p , and temperature limits using kinetic Monte Carlo simulations. We analyze the reaction front dynamics and formation of Au clusters using the model which takes into account surface adatom pair and three-body interactions, CO adsorption and desorption, catalytic carbonyl formation reaction, Au and Ni adatom diffusion and their concerted exchange. Variation of interaction parameters allows us to identify three possible reaction front propagation limits with different pressure dependencies: (i) slow channel-like flow in agreement with experimental data [1] (step flow rate, R , increases with p ), (i…
Stationary phase modulation in liquid chromatography through the serial coupling of columns: A review
2016
Liquid chromatography with single columns often does not succeed in the analysis of complex samples, in terms of resolution and analysis time. A relatively simple solution to enhance chromatographic resolution is the modulation of the stationary phase through the serial coupling of columns. This can be implemented with any type of column using compatible elution conditions and conventional instruments. This review describes the key features of column coupling and published procedures, where two or more columns were coupled in series to solve separation problems. In all reports, the authors could not resolve their samples with single columns, whereas significant enhancement in chromatographi…
Channel flow at an immobilised liquid|liquid interface
2000
A novel rectangular channel flow electrochemical cell for the study of liquid | liquid interfaces is presented. The organic phase is immobilised by the use of a gelling agent, while the aqueous phase flows past the interface. This creates an asymmetric setup that allows us to establish diagnostic criteria to determine, for example, the direction of the ion transfer. The effects of varying flow rate and sweep rate have been considered both theoretically and experimentally. By comparison with two-dimensional simulations, it is demonstrated that a simple one-dimensional theory can be used to describe the cyclic voltammetry response of the channel flow cell.
Abatement of Acid Orange 7 in macro and micro reactors. Effect of the electrocatalytic route
2014
Abstract The electrochemical treatment of aqueous solutions contaminated by Acid Orange 7 (AO7) was widely studied with the main objective to evaluate as the electrocatalytic route affects the performances of the degradation process in macro and microfluidic cells. Direct anodic oxidation (EO), electro-Fenton (EF), electro-generation of active chlorine (IOAC) and coupled processes were investigated in macro and microfluidic reactors in order to select more effective conditions for the treatment of such compound. The effect of numerous operative parameters (such as nature of the electrode materials, coupling of processes, flow rate, current density and inter-electrode distance) on the perfor…