Search results for "wave"

showing 10 items of 6009 documents

Green conditions for the Suzuki reaction using microwave irradiation and a new HNT- supported ionic liquid-like phase (HNT-SILLP) catalyst

2014

A new catalytic system based on modified halloysite nanotubes was employed in the Suzuki reaction under microwave irradi- ation. A set of solvents, times and bases was screened and the best experimental conditions were obtained when the reactions were carried out for 10 min in water–ethanol at 120 °C in presence of K2CO3 as base. Good recyclability was observed. The new catalytic system was employed using either 1 mol% or 0.1 mol%. The palladium catalyst displayed good activity, allowing the synthesis of several biphenyl compounds in high yield working with only 0.1 mol% palladium loading. The application of mi- crowave irradiation decreased the reaction time and also improved conversion wi…

microwaveSuzuki reactionHalloysite; Suzuki reaction; microwave; SILLP (supported ionic liquid-like phase)HalloysiteSILLP (supported ionic liquid-like phase)Settore CHIM/06 - Chimica OrganicaSettore CHIM/02 - Chimica Fisica
researchProduct

Determination of metal concentrations in certified plastic reference materials after small-size autoclave and microwave-assisted digestion followed w…

2017

Abstract The digestion methods for the determination of As, Cd, Cr, Pb, Sb, Sn and Zn concentrations in plastic samples using microwave-assisted digestion (MW-AD) and small-size autoclave digestion was developed. The certified polyethylene, polypropylene, polyvinyl chloride and acrylonitrile butadiene styrene certified reference materials were used in order to find digestion method working properly for several sample matrices. Efficiency of the digestion methods was evaluated by analyzing the residual carbon in digests by TOC analyzer. MW-AD using a mixture of 7 mL of HNO 3 and 3 mL of H 2 O 2 as a digestion solution resulted in excellent recoveries for As, Cd, Pb, Sb and Zn, and were in th…

microwavedigestion010402 general chemistry01 natural sciencesAnalytical ChemistryAutoclavechemistry.chemical_compounddeterminationDigestion (alchemy)plasticta116InstrumentationSpectroscopyPolypropyleneautoclaveChromatographyAcrylonitrile butadiene styreneruoansulatus010401 analytical chemistryAtomic and Molecular Physics and Optics0104 chemical sciencesPolyvinyl chlorideCertified reference materialschemistrymuoviInductively coupled plasma atomic emission spectroscopyICP-OESInductively coupled plasmaSpectrochimica Acta Part B: Atomic Spectroscopy
researchProduct

Antioxidant activity and sensory attributes of tomatoes dehydrated by combination of microwave and convective heating

2013

Tomato halves were dried in a combined microwave-hot air system. Drying experiments were carried out by applying the microwave energy (0.5 W/g) at the beginning of the dehydration process (for 2 and 3.5 hours); simultaneously combining microwave (0.25 W/g) with convective hot-air drying (70°C); and by applying only convective hot air at 70°C. The combined microwave-hot air heating reduced significantly the drying time (up to 50 %), if compared with the only convective system. Simultaneous convective and microwave heating allowed besting preserving antioxidant activity of dried tomatoes, by minimizing lycopene and phenols losses, while ensuring satisfied texture characteristics and less perc…

microwavedryingtomatodrying ; tomato; microwave
researchProduct

Investigation on the stability of dispersion of zirconia nanoparticles prepared by microwave- hydrothermal synthesis

2005

Difficulties in reproducing the performances of nanoparticles dispersions are obstructive for the progress of the nanotechnology. A plausible reason for this variability is the lack of the control of the stability as well as the dimensions of the nanoparticles in the dispersions. In this work we report results of investigations on the stability of zirconia nanoparticles in aqueous medium, monitoring nanoparticles sizes by means of Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS). Nanocrystalline zirconia powders, prepared by microwave-hydrothermal synthesis, were determined to be 6-8 nm in size by TEM observations. By using DLS technique the as-prepared dispersions wit…

microwave-hydrothermal synthesis zirconia nanoparticles Transmission Electron Microscopy Dynamic Light Scattering.Settore CHIM/02 - Chimica Fisica
researchProduct

Microwave-assisted conversion of novel biomass materials into levulinic acid

2018

Levulinic acid is considered one of the most important platform chemicals. It is currently produced mainly from lignocellulosic biomasses. However, there are also other abundant biomass materials, which could be used as raw materials for levulinic acid production. In this work, levulinic acid was produced from two novel biomasses in the presence of Brønsted (H2SO4) and Lewis acid (CrCl3·6H2O or AlCl3·6H2O) catalysts. The studied materials were carbohydrate-rich potato peel waste and sporocarps of the fungus Cortinarius armillatus. Reaction conditions, i.e., time, temperature, H2SO4, and Lewis acid concentrations, were studied by utilizing full 24-factorial experimental designs. Microwave ir…

mikroaallotmicrowaveBiomass Cortinarius armillatuspotato peel wastehapotlevulinic acidbiomassa (teollisuus)Cortinarius armillatussienetseitikitperunaorgaaniset yhdisteet
researchProduct

An ultrasound-assisted digestion method for the determination of toxic element concentrations in ash samples by inductively coupled plasma optical em…

2007

method of ultrasound-assisted digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of toxic element concentrations (arsenic, barium, cobalt, copper, lead, nickel, strontium, vanadium and zinc) in ash samples was developed. All the measurements were performed in robust plasma conditions which were tested by measuring the Mg(II) 280.270 nm/Mg(I) 285.213 nm line intensity ratios. The highest line intensity ratios were observed when a nebulizer gas flow of 0.6 L minˉ¹, auxiliary gas flow of 0.2 L minˉ¹ and plasma power of 1400 W were used for radially viewed plasma. The analysis of SRM 1633b showed that the ultrasound-assisted metho…

mikroaaltomicrowavetuhkaemission spectrometryultrasoundashultraäänimyrkylliset alkuaineettoxic element
researchProduct

A Velocity Estimation Technique for a Monocular Camera Using mmWave FMCW Radars

2021

Perception in terms of object detection, classification, and dynamic estimation (position and velocity) are fundamental functionalities that autonomous agents (unmanned ground vehicles, unmanned aerial vehicles, or robots) have to navigate safely and autonomously. To date, various sensors have been used individually or in combination to achieve this goal. In this paper, we present a novel method for leveraging millimeter wave radar’s (mmW radar’s) ability to accurately measure position and velocity in order to improve and optimize velocity estimation using a monocular camera (using optical flow) and machine learning techniques. The proposed method eliminates ambiguity in optical flow veloci…

mmWave radarTK7800-8360Computer Networks and CommunicationsComputer scienceOptical flowComputingMethodologies_IMAGEPROCESSINGANDCOMPUTERVISIONlaw.inventionoptical flowData acquisitionautonomous systemslawComputer visionElectrical and Electronic EngineeringRadarvelocity estimationbusiness.industryFrame (networking)Object (computer science)Object detectionVDP::Teknologi: 500Hardware and ArchitectureControl and Systems EngineeringSignal ProcessingExtremely high frequencyRobotArtificial intelligenceElectronicsbusinessmonocular cameraElectronics
researchProduct

Localization of Multi-Class On-Road and Aerial Targets Using mmWave FMCW Radar

2021

mmWave radars play a vital role in autonomous systems, such as unmanned aerial vehicles (UAVs), unmanned surface vehicles (USVs), ground station control and monitoring systems. The challenging task when using mmWave radars is to estimate the accurate angle of arrival (AoA) of the targets, due to the limited number of receivers. In this paper, we present a novel AoA estimation technique, using mmWave FMCW radars operating in the frequency range 77–81 GHz by utilizing the mechanical rotation. Rotating the radar also increases the field of view in both azimuth and elevation. The proposed method estimates the AoA of the targets, using only a single transmitter and receiver. The measurements are…

mmWave radarTK7800-8360Computer Networks and CommunicationsComputer scienceangle of arrival (AoA)Field of viewFMCW radarlocalizationlaw.inventionlawAngle of arrivalmulti-class targetsElectrical and Electronic EngineeringRadarVDP::Teknologi: 500::Informasjons- og kommunikasjonsteknologi: 550Remote sensingTransmitterElevationmmWave radar; FMCW radar; localization; multi-class targets; angle of arrival (AoA); azimuth angle; elevation angle; range-angle maps; morphological operators; unmanned aerial vehicle localization; UAV localizationazimuth angleDroneAzimuthContinuous-wave radarHardware and ArchitectureControl and Systems EngineeringSignal ProcessingElectronicsElectronics; Volume 10; Issue 23; Pages: 2905
researchProduct

Classification of Targets Using Statistical Features from Range FFT of mmWave FMCW Radars

2021

Radars with mmWave frequency modulated continuous wave (FMCW) technology accurately estimate the range and velocity of targets in their field of view (FoV). The targeted angle of arrival (AoA) estimation can be improved by increasing receiving antennas or by using multiple-input multiple-output (MIMO). However, obtaining target features such as target type remains challenging. In this paper, we present a novel target classification method based on machine learning and features extracted from a range fast Fourier transform (FFT) profile by using mmWave FMCW radars operating in the frequency range of 77–81 GHz. The measurements are carried out in a variety of realistic situations, including p…

mmWave radarrange FFT featuresTK7800-8360Computer Networks and CommunicationsComputer scienceVDP::Technology: 500Fast Fourier transformReal-time computingtargets classificationFMCW radarSupport vector machineContinuous-wave radarStatistical classificationNaive Bayes classifiermachine learningautonomous systemsHardware and ArchitectureControl and Systems EngineeringFeature (computer vision)Angle of arrivalSignal Processingground station radarGradient boostingElectrical and Electronic EngineeringElectronics
researchProduct

An Exact Solution for the Level-Crossing Rate and the Average Duration of Fades of the Envelope of Sum-of-Cisoids Processes

2012

Authors version of an article published in the journal: Procedia Technology. Also available from the publisher at: http://dx.doi.org/10.1016/j.protcy.2012.03.004 Sum-of-cisoids (SOC) processes provide a physically and numerically appealing framework for the modelling and simulation of a wide class of mobile radio channels. This paper is concerned with the problem of finding a general solution for the level-crossing rate (LCR) and the average duration of fades (ADF) of the envelope of SOC processes. Exact expressions are derived for the LCR and the ADF by taking into account that the inphase component, the quadrature component, and the time derivatives of the inphase and quadrature component…

mobile radio channelsVDP::Mathematics and natural science: 400::Information and communication science: 420::Communication and distributed systems: 423Average durationlevel-crossing rateLevel crossingsum-of-cisoidsRayleigh fadingFading distributionExact solutions in general relativityGeographysum-of-sinusoidsVDP::Technology: 500::Information and communication technology: 550::Telecommunication: 552Rice fadingElectronic engineeringaverage duration of fadesGeneral Earth and Planetary SciencesStatistical physicsComputer Science::Information Theoryfading channel simulatorsGeneral Environmental ScienceRayleigh fadingEnvelope (waves)Mobile radio channelProcedia Technology
researchProduct