Adamantylcalixarenes with CMPO groups at the wide rim: synthesis and extraction of lanthanides and actinides

Abstract Starting from p -adamantylcalix[4]- and [6]arenes functionalized with carboxylic acid or ester groups at the adamantane nuclei, carbamoylmethylphosphine oxide (CMPO)-containing ligands of a novel type were synthesized. They were studied as extractants for a series of f-block elements including radioactive 152 Eu(III), 241 Am(III), 233 U(VI), and 239 Pu(IV). Tetrameric ligand 4b in which CMPO residues are connected to adamantane nuclei through methylene groups gave the best extraction results for lanthanides and actinides. For all the ligands the extraction efficiency does not decrease at higher nitric acid concentration. Although the discrimination between trivalent actinides and l…

Cyclic tetraureas with variable flexibility--synthesis, crystal structures and properties.

Macrocyclic molecules containing several amide or urea functions may serve as anion receptors. We describe the synthesis of 32-membered macrocycles, in which four rigid xanthene units (X) and/or diphenyl ether units (D) as flexible analogues are linked via urea groups. All six possible combinations of these units (XXXX, XXXD, XXDD, XDXD, XDDD and DDDD) were synthesized and two examples were characterised by single-crystal X-ray analyses (DDDD and two structures for XXXD). Both macrocycles showed distinct differences in their overall conformation and consequently in their hydrogen-bonding pattern. Hydrogen-bonded solvent molecules are found for both compounds and intramolecular hydrogen bond…

ChemInform Abstract: Conformationally Mobile Wide Rim Carbamoylmethylphosphine Oxide (CMPO)-Calixarenes.

Conformationally Mobile Wide Rim Carbamoylmethylphosphine Oxide (CMPO)-Calixarenes

Six new calix[4]arene derivatives 2a–f have been synthesised, bearing CMPO-like functions (-NH–C(O)–CH2–P(O)Ph2) at their wide rim. They differ by their alkoxy groups at the narrow rim, comprising all possible combinations of methoxy and syn-propoxy groups including the conformationally mobile tetramethyl ether 2e and the tetrapropyl ether 2f fixed in the cone conformation. Their extraction behaviour for thorium(IV) and several lanthanides(III) from 1M HNO3 to dichloromethane has been studied and compared also to non cyclic calixarene analogues 6a–e. Surprisingly the best extraction results were found for the 1,2-dimethoxy-3,4-dipropoxy derivative 2c among the calixarenes and for the tetram…

Narrow rim CMPO/adamantylcalix[4]arenes for the extraction of lanthanides and actinides

Abstract Six p-(1-adamantyl)calix[4]arenes 7, 8 with four differently attached diphenyl-carbamoylmethylphosphine oxide (CMPO) functions at the narrow rim were synthesized. This series was extended by adamantylcalix[4]arenes with two CMPO and two ester, acid or (diethylphosphono)acetylamino groups. Structures of new compounds were proved by NMR, mass-spectrometry and a single-crystal X-ray analysis for the intermediate di-phthalimide 103. The extraction studies towards selected lanthanides and thorium showed that the ligands 7 surpassed the corresponding p-H, p-tert-butyl and p-tert-octyl analogues 3–5 in lanthanide extraction while thorium was extracted with the same or lesser extent. For t…

Two chloride ions as a template in the formation of a cyclic hexaurea.

tert-Butyl-calix[4]arenes Substituted at the Narrow Rim with Cobalt Bis(dicarbollide)(1–) and CMPO Groups – New and Efficient Extractants for Lanthanides and Actinides

Calix[4]arene derivatives bearing two residues A(–) derived from cobalt bis(dicarbollide)(1–) (1) and two CMPO groups B at their narrow rim were synthesized from tBu-calix[4]arene in four steps. The first step involved the preparation of tBu-calix[4]arene diether derivatives with appropriate precursors for amino groups (mostly nitriles 3). These were O-alkylated through ring-opening reactions with the zwitterionic dioxane derivative [(8-O(CH2CH2)2O-1,2-C2B9H10)-(1′,2′-C2B9H11)-3,3′-Co]0 (10) to produce ionic nitrile derivatives 4. Reduction of the nitrile groups with BH3·SMe2 (or deprotection in the case of the corresponding phthalimido or Boc derivatives 8) led to a series of diamines 5a–f…

Metal ion complexation by tetraester derivatives of bridged calix [4] arenes

A series of bridged calix [4] arenes (5–10 methylene groups in the bridge) were synthesized and transformed into their tetraester derivatives by reaction with ethyl bromoacetate. The stability constants for complexes of the tetraester derivatives with sodium, potassium and silver cations, determined in methanol by spectroscopic or potentiometric techniques, show a drastic decrease (more than 105 for Na +) for the shorter methylene chains. 1H NMR studies demonstrate a conformational rearrangement of the calixarene part to fourfold symmetry to be necessary for the complexation of a cation, which is prevented by the shorter chains. This is further confirmed by the X-ray structure of a tetraest…

Tetra-CMPO-derivatives of calix[4]arenes fixed in the 1,3-alternate conformation

Calix[4]arene derivatives fixed in the 1,3-alternate conformation and substituted at one side by four carbamoylmethylphosphine oxide (CMPO) residues were synthesised. Two CMPO groups are directly attached to the wide rim, while the second pair is bound to the narrow rim via a tri- or tetramethylene spacer. Similar compounds, in which two CMPO groups at the wide rim are combined with two picolinamide groups or two ionisable carboxylic groups at the narrow rim, were also prepared. Some of these calixarene derivatives were studied as extractants for lanthanides (La3+, Eu3+, Yb3+) and thorium (Th4+) from acidic solution into methylene chloride. For selected samples, stability constants in metha…

Zwei Chloridionen als Templat bei der Bildung eines cyclischen Hexaharnstoff-Moleküls

Macrocyclic hexaureas: synthesis, conformation, and anion binding.

Varied flexibility: Cyclic oligoureas are formed by using anions as templates. Linking of six xanthene and/or diphenyl ether fragments by urea groups leads to the formation of five macrocyclic compounds with a 48-membered ring with variable flexibility (see picture). Their interaction with anions shows a strong influence of acetate and chloride ions on the cyclization from four precursor molecules. Five macrocylic compounds XXXXXX, XXDXXD, XDXDXD, XDDXDD, and DDDDDD with 48-membered rings, in which six xanthene and/or diphenyl ether fragments are linked through six urea (-NH-C(O)-NH-) groups, have been synthesized. In the cyclization step, a linear diamine was allowed to react with the appr…

Lanthanide complexation with CMPO and CMPO-calix[4]arenes in solution: spectrophotometric and electrospray mass spectrometric approaches.

The binding of lanthanide(III) cations with organophosphorous ligands like CMPO and related calix[4]arene-based derivatives have been investigated using two experimental methods. The stability constants of the lanthanum, europium and ytterbium complexes were first determined in methanol by UV absorption spectrophotometry in the presence of nitrate or chloride anions. The results showed that the stoichiometry and the stability of the complexes formed depend on the position of the CMPO moieties either on the wide or the narrow rim of the calixarene scaffold, the nature of the medium, the conformational mobility of the ligands. Complexation of lanthanum was also followed by ESI-mass spectromet…

Modification of calix[4]arenes with CMPO-functions at the wide rim. Synthesis, solution behavior, and separation of actinides from lanthanides

Two calix[4]arene tetraethers (Y = C5H11, C14H29) bearing on their wide rim four –N(Me)–CO–CH2–P(O)Ph2 residues were synthesized for the first time. Their ability to extract lanthanides and actinides from an acidic aqueous phase to organic phases (CH2Cl2, NPHE) was studied. In comparison to the corresponding –NH-analogs, they are less efficient extractants, the selectivity for the light over the heavy lanthanides is less pronounced, while there is still an interesting selectivity of Am3+ over Eu3+. Stability constants for selected lanthanide salts were determined also in homogenous phase (methanol, acetonitrile) but do not account for the different extraction results. The complexation of Gd…

Cyclic triureas—synthesis, crystal structures and properties

The synthesis of 24-membered macrocycles is described, in which rigid xanthene units (X) and/or diphenyl ether units (D) as flexible analogues are linked via urea groups. All four possible combinations (XXX, XXD, XDD, DDD) have been obtained with yields of 40-72% for the cyclisation step. In two cases, the respective cyclic hexamers (XXDXXD, XXXXXX) were also isolated. Two compounds have been characterised by a single crystal X-ray analysis of the free triurea (XXD, XDD) and one example (DDD) by its complex with tetrabutylammonium chloride. It shows the chloride anion in the centre of the macrocycle, held by six NH...Cl- hydrogen bonds. The interaction with various other anions has been stu…