How ill-defined constituents produce well-defined nanoparticles: effect of polymer dispersity on the uniformity of copolymeric micelles

2019

We investigate the effect of polymer length dispersity on the properties of self-assembled micelles in solution by self-consistent field calculations. Polydispersity stabilizes micelles by raising the free energy barriers of micelle formation and dissolution. Most importantly, it significantly reduces the size fluctuations of micelles: Block copolymers of moderate polydispersity form more uniform particles than their monodisperse counterparts. We attribute this to the fact that the packing of the solvophobic monomers in the core can be optimized if the constituent polymers have different length.

Stimuli-responsive brushes with active minority components: Monte Carlo study and analytical theory

2015

Using a combination of analytical theory, Monte Carlo simulations, and three dimensional self-consistent field calculations, we study the equilibrium properties and the switching behavior of adsorption-active polymer chains included in a homopolymer brush. The switching transition is driven by a conformational change of a small fraction of minority chains, which are attracted by the substrate. Depending on the strength of the attractive interaction, the minority chains assume one of two states: An exposed state characterized by a stem-crown-like conformation, and an adsorbed state characterized by a flat two-dimensional structure. Comparing the Monte Carlo simulations, which use an Edwards-…

Dynamic Density Functional Theories for Inhomogeneous Polymer Systems Compared to Brownian Dynamics Simulations

2017

Dynamic density functionals (DDFs) are popular tools for studying the dynamical evolution of inhomogeneous polymer systems. Here, we present a systematic evaluation of a set of diffusive DDF theories by comparing their predictions with data from particle-based Brownian dynamics (BD) simulations for two selected problems: Interface broadening in compressible A/B homopolymer blends after a sudden change of the incompatibility parameter, and microphase separation in compressible A:B diblock copolymer melts. Specifically, we examine (i) a local dynamics model, where monomers are taken to move independently from each other, (ii) a nonlocal "chain dynamics" model, where monomers move jointly with…

Polydisperse polymer brushes: internal structure, critical behavior, and interaction with flow

2016

We study the effect of polydispersity on the structure of polymer brushes by analytical theory, a numerical self-consistent field approach, and Monte Carlo simulations. The polydispersity is represented by the Schulz-Zimm chain-length distribution. We specifically focus on three different polydispersities representing sharp, moderate and extremely wide chain length distributions and derive explicit analytical expressions for the chain end distributions in these brushes. The results are in very good agreement with numerical data obtained with self-consistent field calculations and Monte Carlo simulations. With increasing polydispersity, the brush density profile changes from convex to concav…

Shear Modulus of an Irreversible Diblock Copolymer Network from Self-Consistent Field Theory

2019

Using self-consistent field theory, we investigate the stretching-induced microphase separation in an irreversibly cross-linked polymer network composed of diblock copolymer chains and estimate its...

Bottom-up construction of dynamic density functional theories for inhomogeneous polymer systems from microscopic simulations

2020

We propose and compare different strategies to construct dynamic density functional theories (DDFTs) for inhomogeneous polymer systems close to equilibrium from microscopic simulation trajectories. We focus on the systematic construction of the mobility coefficient, $\Lambda(r,r')$, which relates the thermodynamic driving force on monomers at position $r'$ to the motion of monomers at position $r$. A first approach based on the Green-Kubo formalism turns out to be impractical because of a severe plateau problem. Instead, we propose to extract the mobility coefficient from an effective characteristic relaxation time of the single chain dynamic structure factor. To test our approach, we study…

Phase transitions in single macromolecules: Loop-stretch transition versus loop adsorption transition in end-grafted polymer chains.

2018

We use Brownian dynamics simulations and analytical theory to compare two prominent types of single molecule transitions. One is the adsorption transition of a loop (a chain with two ends bound to an attractive substrate) driven by an attraction parameter $\varepsilon$, and the other is the loop-stretch transition in a chain with one end attached to a repulsive substrate, driven by an external end-force $F$ applied to the free end. Specifically, we compare the behavior of the respective order parameters of the transitions, i.e., the mean number of surface contacts in the case of the adsorption transition, and the mean position of the chain end in the case of the loop-stretch transition. Clo…

Using Copolymers to Design Tunable Stimuli-Reponsive Brushes

2020

Recently, a new design for switch sensors has been proposed that exploits a conformational transition of end-grafted minority adsorption-active homopolymers in a monodisperse polymer brush [Klushin...

Particle Penetration into Polydisperse Polymer Brushes: A Theoretical Analysis

2017

Based on theoretical analysis, the effect of polydispersity on particle penetration into polydisperse polymer brushes is investigated. Three different polydispersities representing sharp, moderate, and extremely wide chain length distributions are chosen, since the corresponding explicit expressions of brush density at these polydispersities are available. To simplify the discussion, this study is restricted to spherical particles of small size which ensure that the particle insertion only causes local conformational perturbations. By analyzing the particle distribution, it is found that polydispersity always facilitates particle penetration. This prediction is confirmed by analyzing the su…

Anomalous critical slowdown at a first order phase transition in single polymer chains

2017

Using Brownian Dynamics, we study the dynamical behavior of a polymer grafted onto an adhesive surface close to the mechanically induced adsorption-stretching transition. Even though the transition is first order, (in the infinite chain length limit, the stretching degree of the chain jumps discontinuously), the characteristic relaxation time is found to grow according to a power law as the transition point is approached. We present a dynamic effective interface model which reproduces these observations and provides an excellent quantitaive description of the simulations data. The generic nature of the theoretical model suggests that the unconventional mixing of features that are characteri…

Adsorption Active Diblock Copolymers as Universal Agents for Unusual Barrier-Free Transitions in Stimuli-Responsive Brushes

2021

We reconsider a recently proposed design for smart responsive brushes, which is based on a conformational transition in very dilutely embedded block copolymers with a surface active block (Qi et al., Macromolecules 53, 5326, 2020). Under certain conditions, the transition acquires an unusual character: it remains very sharp, but the barrier separating the adsorbed and desorbed states disappears completely. We show that these features are very robust with respect to changing almost all system parameters: the lengths of the inert and active blocks of the minority chain, the brush length, its density, and its polydispersity. The only relevant condition is that the inert block of the minority c…

Solvent Determines Nature of Effective Interactions between Nanoparticles in Polymer Brushes

2015

We study the effective interaction between two parallel rod-like nanoparticles in swollen and collapsed polymer brushes as a function of penetration depth by 2D self-consistent field calculations. In vertical direction, the interaction is always attractive. In lateral direction, the behavior under good and poor solvent conditions is qualitatively different. In swollen brushes (good solvent), nanoparticles always repel each other. In collapsed brushes (poor solvent), we identify two different regimes: an immersed regime, where the nanoparticles are fully surrounded by the brush, and an interfacial regime, where they are located in the interface between brush and solvent. In the immersed regi…

Tuning Transition Properties of Stimuli-Responsive Brushes by Polydispersity

2018

Polydispersity Effects on Interpenetration in Compressed Brushes

2019

We study the effect of polydispersity on the compression and interpenetration properties of two opposing polymer brushes by numerical self-consistent field approach and by analytical theory. Polydispersity is represented by an experimentally relevant Schulz–Zimm chain-length distribution. We focus on three different polydispersities representing sharp, moderate, and extremely wide chain length distributions and derive approximate analytical expressions for the pressure–separation curves, Π(D). We study the brush interpenetration and quantify it in terms of the overlap integral, Γ, representing the number of interbrush contacts, and interpenetration length, δ. For the case of moderate densit…

Sharp and fast: sensors and switches based on polymer brushes with adsorption-active minority chains.

2014

We propose a design for polymer-based sensors and switches with sharp switching transition and fast response time. The switching mechanism involves a radical change in the conformations of adsorption-active minority chains in a brush. Such transitions can be induced by a temperature change of only about ten degrees, and the characteristic time of the conformational change is less than a second. We present an analytical theory for these switches and support it by self-consistent field calculations and Brownian dynamics simulations.

Oscillatory interaction between two like‐charged nanoparticles induced by polyelectrolyte brush–solvent interface

2016

Hybrid particle-continuum simulations coupling Brownian dynamics and local dynamic density functional theory

2017

We present a multiscale hybrid particle-field scheme for the simulation of relaxation and diffusion behavior of soft condensed matter systems. It combines particle-based Brownian dynamics and field-based local dynamics in an adaptive sense such that particles can switch their level of resolution on the fly. The switching of resolution is controlled by a tuning function which can be chosen at will according to the geometry of the system. As an application, the hybrid scheme is used to study the kinetics of interfacial broadening of a polymer blend, and is validated by comparing the results to the predictions from pure Brownian dynamics and pure local dynamics calculations.

Contour-Variable Model of Constitutive Equations for Polymer Melts

2009

Based on a modified expression of the rate of the convective constraint release, we present a new contour-variable model of constitutive equations in which the non-uniform segmental stretch and the non-Gaussian chain statistical treatment of the single chain are considered to describe the polymer chain dynamics and the rheological behavior of an entangled system composed of linear polymer chains. The constitutive equations are solved numerically in the cases of steady shear and transient start-up of steady shear. The results indicate that the orientation and stretch, as well as the tube survival probability, have strong dependence on the chain contour variable, especially in the high-shear-…