0000000000018954
AUTHOR
V. Castillo
Installation and commissioning of the TileCal Read-Out Drivers
TileCal is the hadronic tile calorimeter of the ATLAS experiment at LHC/CERN. The main component of the TileCal back-end electronics is the Read-Out Driver (ROD). The ROD system is placed between the first and the second level trigger and it is the responsible for processing the data gathered by the detector. The principal devices of the RODs are the Digital Signal Processors (DSPs) mounted in the Processing Units (PUs) daughterboards. The architecture and functionality of the RODs are briefly explained. Then, it is presented the ROD system installation in the ATLAS electronics cavern. Currently, the RODs are being used for the detector commissioning. It is detailed the Detector and Verific…
A reanalysis of branching fractions of charmed mesonsD 0,D + andD s +
We combine highly complementary information on branching fractions of charmed mesonsD0,D+ andDs+ coming from two experiments both yielding doublecharm samples. The NA 32 experiment provided exclusive branching fractions for channels with at least two charged decay products while a recent Mark III paper provides results on inclusive charm decay properties. The knowledge of channels withK0's in the former is used to recalculate the charged multiplicity distribution in the latter. We obtain 〈nch〉=2.25±0.08 forD0, 〈nch〉=1.96±0.08 forD+ and 〈nch〉=2.41±0.38 forDs+. In turn the knowledge of the charged multiplicity improves the overall normalization of exclusive branching fractions. This reanalysi…
ATLAS TileCal Read Out Driver production
The production tests of the 38 ATLAS TileCal Read Out Drivers (RODs) are presented in this paper. The hardware specifications and firmware functionality of the RODs modules, the test-bench and the test procedure to qualify the boards are described. Finally the performance results, the temperature studies and high rate tests are shown and discussed.
Measurement of charmed-particle lifetimes and decay branching ratios
The lifetimes of charmed hadrons photoproduced in nuclear emulsion have been computed from a practically background-free sample of 44 neutral particle decays and 42 charged-particle decays including 27D±, 11Λc+, 1Ds+ and 3 ambiguous decays. The values obtained are τ(D0, bar D0) = (3.6-0.8+1.2 ± 0.7) 10-13 s, τ(D±) = (5.0-1.0+1.5 ± 1.9) 10-13 s, τ(Λc+) = = (2.3-0.6+0.9 ± 0.4) 10-13 s. Branching ratios of various decay topologies were also obtained.
DSP Online Algorithms for The ATLAS TileCal Read-Out Drivers
TileCal is the hadronic tile calorimeter of the ATLAS experiment at LHC/CERN. The central element of the back-end system of the TileCal detector is the read-out driver (ROD).The main components of the TileCal ROD are the digital signal processors (DSPs) placed on the processing unit (PU) daughterboards. This paper presents a detailed description of the code developed for the DSPs. The code is divided into two different parts: the first part contains the core functionalities and the second part the reconstruction algorithms. The core acts as an operating system and controls configuration, data reception and transmission and synchronization between front-end data and the timing, trigger and c…
Measurement of the mass and width of the charmed meson D∗+ (2010)
Abstract Using a high-resolution silicon vertex detector we have observed a very clean signal of 127 D∗+. After a careful study of the experimental resolution of our apparatus we have measured m( D ∗++ )−m( D 0 ) = 145.39±0.06±0.03 MeV . We have also obtained a 90% CL upper limit to γ(D∗+) of 131 keV.
Functional super Read-Out Driver demonstrator for the Phase II Upgrade of the ATLAS Tile Calorimeter
This work presents the implementation of a functional super Read-Out Driver (sROD) demonstrator for the Phase II Upgrade of the ATLAS Tile Calorimeter (TileCal) in the LHC experiment. The proposed front-end for the Phase II Upgrade communicates with back-end electronics using a multifiber optical connector with a data rate of 57.6 Gbps using the GBT protocol. This functional sROD demonstrator aims to help in the understanding of the problems that could arise in the upgrade of back-end electronics. The demonstrator is composed of three different boards that have been developed in the framework of ATLAS activities: the Optical Multiplexer Board (OMB), the Read-Out Driver (ROD) and the Optical…
Production of the charmed baryon $\Lambda_{c}^{+}$ in $\pi^{-}$Cu and K$^{-}$Cu interactions at 230 GeV
Abstract We present results from the NA32 experiment at CERN on the production characteristics of the charmed baryon Λ+c in 230 GeV π−Cu and K−Cu interactions. A high resolution vertex detector consisting of change-coupled devices and silicon microstrip detectors allowed the selection of a very clean sample of 154 Λ+c → pK−π+ (and charge conjugate) decays. Results on differential and integrated cross sections are given.
$$\bar K^{0*} (892)$$ andK 0*(892) production at lowp t and the quark parton model
Data on the production of the neutralK*(892) resonances at lowpt by 200 GeVK− and π− is compared with the predictions of various models based on the quark parton model of hadrons.
Measurement of the mass and lifetime of the charmed strange baryon $\Xi_{c}^{+}$
Abstract We have observed six unambiguous decays of the charmed strange baryon Ξc+ (or charge conjugate Ξc−) in the 230 GeV/c negative pions or kaons on a copper target at the CERN SPS using silicon microstrip detectors and charge-coupled devices for vertex reconstruction. Three of them have been reconstructed through the decay chain Ξc+ →Ξ−π+π+, Ξ− →Λ0π−, Λ0 →pπ− and the other three through the decay chain Ξc+ →Σ+K−π+ →pπ0. We present our measurements of the mass, lifetime and production cross-section of the Ξc+, as well as of the branching ration for the two decay modes.
Production properties ofD 0,D +,D *+ andD s + in 230 GeV/c? ? andK ?-Cu interactions
We have studied the hadronic production of charmed mesons in the NA 32 experiment at CERN. A special trigger together with a high resolution vertex detector consisting of charge coupled devices and silicon microstrip detectors allowed the selection of very clean samples of charmed mesons. We have collected 852 fully reconstructed decays: 60D + →K + K −π+, 543D°→K −π+ andK −π+π−π+ as well as 249D +→K −π+π+ (or charge conjugate). 147 mesons out of our $${{D^0 } \mathord{\left/ {\vphantom {{D^0 } {\bar D^0 }}} \right. \kern-\nulldelimiterspace} {\bar D^0 }}$$ sample were produced via chargedD * state. For all charmed mesons we determine the total production cross-section and study thex F andp …
Lifetimes of charged and neutralD mesons
We have measured the lifetimes of hadronically produced charged and neutralD mesons using silicon microstrip detectors and an active silicon target in the NA32 spectrometer at the CERN SPS. We obtainτD± = (10.9±1.51.9)·10−13s andτD(−)10 = (4.2±0.5)·10−13s based on 59 and 90 fully reconstructed decays respectively, giving a ratioτD±/τD(−)10 of 2.6 ±0.5.
Optical Link Card Design for the Phase II Upgrade of TileCal Experiment
This paper presents the design of an optical link card developed in the frame of the R&D activities for the phase 2 upgrade of the TileCal experiment. This board, that is part of the evaluation of different technologies for the final choice in the next years, is designed as a mezzanine that can work independently or be plugged in the optical multiplexer board of the TileCal backend electronics. It includes two SNAP 12 optical connectors able to transmit and receive up to 75 Gb/s and one SFP optical connector for lower speeds and compatibility with existing hardware as the read out driver. All processing is done in a Stratix II GX field-programmable gate array (FPGA). Details are given on th…
TileCal optical multiplexer board 9U prototype
This paper presents the architecture and the status of the optical multiplexer board (OMB) for the ATLAS/LHC Tile hadronic calorimeter (TileCal). This board will analyze the front-end data CRC to prevent bit and burst errors produced by radiation. Besides, due to its position within the data acquisition chain it will be used to emulate front-end data for tests. The first two prototypes of the final OMB 9U version have been produced at CERN. Detailed design issues and manufacture features of these prototypes are described. These prototypes are being validated whereas some firmware developments are being implemented in the programmable devices of the board. Functional descriptions of the boar…
Algorithms for the ROD DSP of the ATLAS Hadronic Tile Calorimeter
In this paper we present the performance of two algorithms currently running in the Tile Calorimeter Read-Out Driver boards for the commissioning of ATLAS. The first algorithm presented is the so called Optimal Filtering. It reconstructs the deposited energy in the Tile Calorimeter and the arrival time of the data. The second algorithm is the MTag which tags low transverse momentum muons that may escape the ATLAS muon spectrometer first level trigger. Comparisons between online (inside the Read-Out Drivers) and offline implementations are done with an agreement around 99% for the reconstruction of the amplitude using the Optimal Filtering algorithm and a coincidende of 93% between the offli…
The sROD demonstrator for the ATLAS Tile Calorimeter Upgrade
This work presents the early design of the super Read-Out Driver (sROD) demonstrator board for the Tile Calorimeter Demonstrator project. This project aims to test the new readout electronics architecture for the Phase 2 Upgrade of the ATLAS Tile Calorimeter, replacing the front-end electronics of one complete drawer with the new electronics during the Long Shutdown 2013, in order to evaluate its performance. The sROD demonstrator board will receive and process data from 48 channels. Moreover the sROD demonstrator board will send preprocessed data to the present trigger system, and will transmit trigger control and timing information (TTC) and Detector Control System (DCS) commands to the f…
Measurement of the masses and lifetimes of the charmed mesonsD 0,D + andD s +
We present the final results on the measurement of the masses and lifetimes of the mesonsD0,D+ andD s + in the NA32 experiment at the CERN SPS, using silicon microstrip detectors and charge-coupled devices for vertex reconstruction. We measure the following lifetimes:\(\tau _{D^0 } = 3.88 \pm _{0.21}^{0.23} \cdot 10^{ - 13} s\) using a sample of 479D°→K−π+π−π+ and 162D°→K−π+ decays;\(\tau _{D^ + } = 10.5 \pm _{0.72}^{0.77} \cdot 10^{ - 13} s\) with a sample of 317D+→K−π+π+ decays;\(\tau _{D_s^ + } = 4.69 \pm _{0.86}^{1.02} \cdot 10^{ - 13} s\) with a sample of 54D s + →K+K−π+ decays. We measure the following masses:mD0=1864.6±0.3±1.0 MeV,mD+=1870.0±0.5±1.0 MeV and\(m_{D_s^ + } \)=1967.0±1.0…
Signal integrity studies at optical multiplexer board for TileCal system
6 pages.-- ISI Article Identifier: 000253651800006
Development of an optical link card for the upgrade phase II of TileCal experiment
This work presents the design of an optical link card developed in the frame of the R&D activities for the phase 2 upgrade of the TileCal experiment as part of the evaluation of different technologies for the final choice in the next two years. The board is designed as a mezzanine which can work independently or plugged in the Optical Multiplexer Board of the TileCal backend electronics. It includes two SNAP 12 optical connectors able to transmit and receive up to 75 Gbps and one SFP optical connector for lower speeds and compatibility with existing hardware as the Read Out Driver. All processing is done in a Stratix II GX FPGA. Details are given on the hardware design including signal and …
A study of λ+c decays into pK−π+, pK−π+π0and pK−π+π0π0
Abstract In the CERN NA32 experiment a high-resolution silicon vertex detector and a purely topological approach were used to collect a clean sample of λ + c decays into pK − π + with or without additional neutral particles. We study the subresonant structure of the λ c + peak obtaining BR (λ c + → p K ∗0 (892)) = 0.35 −0.07 +0.06 ±0.03 with respect to the total λ c + → pK − π + decay. We also determine branching ratios for some channels with neutral decay products, namely BR( λ c + → pK − π + π 0 ) = 0.73±0.12±0.05 and BR( λ c + → pK − π + π 0 π 0 = 0.16±0.07±0.03, again with respect to the total λ c + → pK − π + decay.
Charmed pair correlations in π−Cu interactions at 230 GeV/c
Abstract In the CERN NA32 experiment a high-resolution silicon vertex detector and a purely topological approach were used to collect 557 events consistent with associated charm production, both decay vertices being observed. The pseudorapidity gap distribution appears to be nearly independent of the nature of the charmed hadrons. This distribution is reasonably consistent with the next-to-leading order QCD calculations. However the azimuthal-angle distribution is significantly broader than the above predictions.
Development of the optical multiplexer board prototype for data acquisition in TileCal experiment
The optical multiplexer board is one of the elements present in the read out chain of the tile calorimeter in ATLAS experiment. Due to radiation effects, two optical fibers with the same data come out from the front end boards to this board, which has to decide in real time which one carries good data and pass them to the read out driver motherboard for processing. This paper describes the design and tests of the first prototype, implemented as a 6U VME64x slave module, including both hardware and firmware aspects. In this last, algorithms for cyclic redundancy code checking are used to make the decision. Besides, the board may be used as a data injector for testing purposes of the read out…
First measurement of the lifetime of the charmed strange baryon Ξc0
Abstract We have observed four unambiguous decays of the charmed strange baryon Ξco in the NA32 experiment at CERN. Charge- coupled devices and silicon microstrip detectors were used to reconstruct the decay mode Ξ c o → pK − K ∗ (892) o seen in events produced by the interaction of 230 GeV/c negative poins and kaons on a copper target. We present the first measurement of the lifetime of the Ξco, together with a determination of its mass and production cross section. The resonant components of the Ξco decay are studied. We use our earlier measurement of the mass of the Ξc+ in the determination of the isospin mass splitting of the Ξc states.
The Optical Multiplexer Board for the ATLAS Hadronic Tile Calorimeter
This paper presents the architecture and the status of the optical multiplexer board (OMB) for the ATLAS/LHC tile hadronic calorimeter (TileCal). This board will analyze the front-end data CRC to prevent bit and burst errors produced by radiation. Besides, due to its position within the data acquisition chain it will be used to emulate front-end data for tests. The first two prototypes of the final OMB 9U version have been produced at CERN. Detailed design issues and manufacturing features of these prototypes are described. These prototypes are being validated while firmware developments are being implemented in the programmable devices of the board.
Development of the Optical Multiplexer Board Prototype for Data Acquisition in the TileCal System
This paper describes the development of the optical multiplexer board (OMB), also known as PreROD board, for the TileCal readout system in the ATLAS experiment. The aim of this board is to overcome the problems that may arise in the integrity of data due to radiation effects. The solution adopted has been to add redundancy to data transmission and so two optical fibers with the same data come out from the detector front end boards. The OMB has to decide in real time which fiber, eventually, carries data with no errors switching it to the output link connected to the read out driver (ROD) motherboard where data processing takes place. Besides, the board may be also used as a data injector fo…
Measurement of various decay modes of charmed particlesD 0,D +,D s + andΛ s c
In the CERN NA 32 experiment a high-resolution silicon vertex detector and a purely topological approach have been used to investigate various decays of charmed particles. We observe ∼620 fully reconstructed decays ofD0 in 12 channels and determine the branching ratios. For fourD0 decay modes involving a single (unseen) π0 the small and narrowD*+−D0 mass difference is used to measure their branching ratios. We also observe ∼280 fully reconstructedD+ decays in 10 channels, ∼90Ds+ decays in 11 channels as well as 160Λsc and 18 decay channels ofD+. For theDs+, we measure the branching fractions within a subset of 16 three- and five-prong decay channels. For theΛsc, we determine the branching f…
Inclusive $$\bar K^{0*} (892)$$ andK 0*(892) production on silicon by 200 GeVK − andπ −
The production of the neutralK− (892) resonances by 200 GeVK− andπ− has been studied over the kinematic range 0.0<xf<1.0 andpt2<5.0 GeV2. Longitudinal and transverse momentum distributions are presented. In addition the decay angular distributions inK− fragmentation to\(\bar K^{0*} \) have been investigated.
Production ofD, D * andD s mesons in 200 GeV/c ?? K ? andp-Si interactions
The NA 32 experiment at the CERN SPS has collected 38 million hadronic interactions with incident 200 GeV/c π−,K− andp beam. Using a segmented silicon active target and a telescope of high resolution silicon microstrip counters we have selected fully reconstructedD0→K−π+,D0→K−π+π+π−,D+→K−π+π+,Ds+→K−K+π+π+ and charge conjugate decays. The integrated cross-sections forDo,D+D*+ andDs+ meson production and the dependence of the cross-section on longitudinal and transverse momentum of theD are presented.
Optimal filtering algorithm implementation in FPGAs for the ATLAS TileCal Read-Out drivers
TileCal is the hadronic calorimeter of the ATLAS experiment in the LHC (CERN). Its Read-Out Drivers (RODs) process, in real time, the digitized information coming from the front-end electronics and send it to the Read-Out System. Data processing in the ROD boards is performed in Processing Unit Mezzanine Cards that use commercial DSPs to run the Optimal Filtering (OF) algorithms.
Cross sections and some features of charm photoproduction at gamma energies of 20-70 GeV
Abstract We report some results on charm photoproduction at γ energies ranging from 20 to 70 GeV. 36 events with pairs of charmed particles have been found in emulsions. The computed total cross section is (230±57)nb/nucleon. Frequencies of different production channels and some distributions are presented and compared with the predictions from a photon-gluon fusion model with string fragmentation.
Measurement of the Lifetime of Neutral Charmed Mesons
Abstract The lifetime of neutral charmed particles photoproduced in emulsion has been measured. The lifetime value presented here was obtained from a sample of 22D 0 mesons, 18 of which have their charmed partner seen in emulsion. The sample is essentially background-free. The result obtained is τ D 0 =(2.11 +1.21 -0.63 )×10 13 s The D 0 mass derived from 8 3C events is m D 0 = 1856 ± 36 MeV/ c 2 .
Charged charmed particle lifetime
Abstract We present the lifetime values obtained for D ± and Λ c + , photoproduced in nuclear emulsion in the WA58 experiment. In photohadronic interactions, pairs of charmed particles are produced. Out of 20 charged charmed particles used for lifetime evaluation, 17 have their charmed partner seen emulsion, being then essentially free from any background. The values of the lifetime are τ D ± = (3.91 −1.25 +2.35 ) × 10 −13 s, τ Λ c + = (2.22 −0.75 +1.34 ) × 10 −13 s.
The ATLAS tile calorimeter ROD injector and multiplexer board
Abstract The ATLAS Tile Calorimeter is a sampling detector composed by cells made of iron-scintillator tiles. The calorimeter cell signals are digitized in the front-end electronics and transmitted to the Read-Out Drivers (RODs) at the first level trigger rate. The ROD receives triggered data from up to 9856 channels and provides the energy, phase and quality factor of the signals to the second level trigger. The back-end electronics is divided into four partitions containing eight RODs each. Therefore, a total of 32 RODs are used to process and transmit the data of the TileCal detector. In order to emulate the detector signals in the production and commissioning of ROD modules a board call…