Micromechanics of “raspberry” morphology in PPE/SAN polymer blends compatibilized with linear ABC triblock terpolymers

2015

Abstract The effect of compatibilization with a symmetrical polystyrene- block -polybutadiene- block -poly(methyl methacrylate) (SBM) triblock terpolymer on the morphological and mechanical properties (specifically toughness) of immiscible poly(2,6-dimethyl-1,4-phenylene ether)/poly(styrene- co -acrylonitrile) (PPE/SAN) blends with different blend (w/w) ratios is investigated. We study the effect of blend viscosity on the localization of the compatibilizer at the blend interface, influencing the mechanical properties of the macroscopic material. The impact of the specific morphology of the blends, known as “raspberry morphology”, on the final material will be explained using thermomechanica…

Interfacial Assembly and Jamming Behavior of Polymeric Janus Particles at Liquid Interfaces

2017

The self-assembly and interfacial jamming of spherical Janus nanoparticles (JNPs) at the water/oil interface were investigated. Polymeric JNPs, made by cross-linking polystyrene-block-polybutadiene-block-poly(methyl methacrylate) (PS-PB-PMMA), with a high interfacial activity assemble at the water/oil interface. During the self-assembly at the interface, the interfacial energy was reduced and a dynamic interlayer was observed that is responsive to the pH of the aqueous phase. Unlike hard particles, the JNPs are composed of polymer chains that can spread at the liquid-liquid interface to maximize coverage at relatively low areal densities. In a pendant drop geometry, the interfacial area of …

Guided hierarchical co-assembly of soft patchy nanoparticles.

2013

Different polymers can be used in combination to produce coexisting nanoparticles of different symmetry and tailored to co-assemble into well-ordered binary and ternary hierarchical structures. There is considerable practical interest in developing the tools to fabricate multicomponent artificial systems that mimic the hierarchical ordering seen in the natural world — complex biomaterials can be assembled from the simple but precisely defined molecular building blocks. Andre Groschel and colleagues have developed a bottom-up approach that's a step in that direction. Previously they designed simple linear polymers that self-assemble in solution to produce monodisperse nanoparticles with well…

Rational design of ABC triblock terpolymer solution nanostructures with controlled patch morphology

2016

Block copolymers self-assemble into a variety of nanostructures that are relevant for science and technology. While the assembly of diblock copolymers is largely understood, predicting the solution assembly of triblock terpolymers remains challenging due to complex interplay of block/block and block/solvent interactions. Here we provide guidelines for the self-assembly of linear ABC triblock terpolymers into a large variety of multicompartment nanostructures with C corona and A/B cores. The ratio of block lengths NC/NA thereby controls micelle geometry to spheres, cylinders, bilayer sheets and vesicles. The insoluble blocks then microphase separate to core A and surface patch B, where NB co…

Janus Micelles as effective supracolloidal dispersants for carbon nanotubes

2012

Hidden Structural Features of Multicompartment Micelles Revealed by Cryogenic Transmission Electron Tomography

2014

The demand for ever more complex nanostructures in materials and soft matter nanoscience also requires sophisticated characterization tools for reliable visualization and interpretation of internal morphological features. Here, we address both aspects and present synthetic concepts for the compartmentalization of nanoparticle peripheries as well as their in situ tomographic characterization. We first form negatively charged spherical multicompartment micelles from ampholytic triblock terpolymers in aqueous media, followed by interpolyelectrolyte complex (IPEC) formation of the anionic corona with bis-hydrophilic cationic/neutral diblock copolymers. At a 1:1 stoichiometric ratio of anionic a…

Bulk morphologies of polystyrene-block-polybutadiene-block-poly(tert-butyl methacrylate) triblock terpolymers

2015

Abstract The self-assembly of block copolymers in the bulk phase enables the formation of complex nanostructures with sub 100 nm periodicities and long-range order, both relevant for nanotechnology applications. Here, we map the bulk phase behavior of polystyrene-block-polybutadiene-block-poly(tert-butyl methacrylate) (SBT) triblock terpolymers on a series of narrowly distributed polymers with widely different block volume fractions, ϕS, ϕB and ϕT. In dependence of ϕ, we find the lamella–lamella, core-shell cylinder, cylinder-in-lamella and core-shell gyroid morphology, but also a rarely observed cylinder-in-lamella phase. The bulk morphologies are thoroughly characterized by transmission e…

Synergistic effects of Janus particles and triblock terpolymers on toughness of immiscible polymer blends

2017

Abstract By influencing both the interfacial adhesion and the morphology, compatibilizers determine the mechanical properties of polymer blends. Here, we study the mechanical properties, in particular the fatigue crack propagation (FCP) of immiscible blends of poly(2,6-dimethyl-1,4-phenylene ether)/poly(styrene- co -acrylonitrile) (PPE/SAN), compatibilized with Janus nanoparticles (JPs) and linear polystyrene- block -polybutadiene- block -poly(methyl methacrylate) (SBM) triblock terpolymers. Synergistic effects of a mixture of both compatibilizers improve the FCP behavior and reveal the important role of interface stiffness and flexibility on the mechanical properties of polymer blends. The…

Janus-Micellen als effektive suprakolloidale Dispersionsmittel für Kohlenstoff-Nanoröhren

2013

Controlling Multicompartment Morphologies Using Solvent Conditions and Chemical Modification

2016

The solution self-assembly of amphiphilic diblock copolymers into spheres, cylinders, and vesicles (polymersomes) has been intensely studied over the past two decades, and their morphological behavior is well understood. Linear ABC triblock terpolymers with two insoluble blocks A/B, on the other hand, display a richer and more complex morphological spectrum that has been recently explored by synthetic block length variations. Here, we describe facile postpolymerization routes to tailor ABC triblock terpolymer solution morphologies by altering block solubility (solvent mixtures), blending with homopolymers, and block-selective chemical reactions. The feasibility of these processes is demonst…

The Impact of Janus Nanoparticles on the Compatibilization of Immiscible Polymer Blends under Technologically Relevant Conditions

2014

Several hundred grams of Janus nanoparticles (d ≈ 40 nm) were synthesized from triblock terpolymers as compatibilizers for blending of technologically relevant polymers, PPE and SAN, on industry-scale extruders. The Janus nanoparticles (JPs) demonstrate superior compatibilization capabilities compared to the corresponding triblock terpolymer, attributed to the combined intrinsic properties, amphiphilicity and the Pickering effect. Straightforward mixing and extrusion protocols yield multiscale blend morphologies with "raspberry-like" structures of JPs-covered PPE phases in a SAN matrix. The JPs densely pack at the blend interface providing the necessary steric repulsion to suppress droplet …

Using Janus Nanoparticles To Trap Polymer Blend Morphologies during Solvent-Evaporation-Induced Demixing

2015

Using ternary blends of polystyrene (PS), poly(methyl methacrylate) (PMMA), and Janus particles (JPs) with symmetric PS and PMMA hemispheres, we demonstrate the stabilization of dispersed and bicontinuous phase-separated morphologies by the interfacial adsorption of Janus particles during demixing upon solvent removal. The resulting blend morphology could be varied by changing the blend composition and JP loading. Increasing particle loading decreased the size of phase-separated domains, while altering the mixing ratio of the PS/PMMA homopolymers produced morphologies ranging from PMMA droplets in a PS matrix to PS droplets in a PMMA matrix. Notably, bicontinuous morphologies were obtained …