0000000000075339
AUTHOR
S. Reiter
The Performance of Belle II High Level Trigger in the First Physics Run
The Belle II experiment is a new generation B-factory experiment at KEK in Japan aiming at the search for New Physics in a huge sample of B-meson decays. The commissioning of the accelerator and the detector for the first physics run has started from March this year. The Belle II High Level Trigger (HLT) is fully working in the beam run. The HLT is now operated with 1600 cores clusterized in 5 units, which is 1/4 of the full configuration. The software trigger is performed using the same offline reconstruction code, and events are classified into a set of physics categories. Only the events in the categories of interest are finally sent out to the storage. Live data quality monitoring is also…
Search for an Invisibly Decaying Z′ Boson at Belle II in e+e−→μ+μ−(e±μ∓) Plus Missing Energy Final States
Theories beyond the standard model often predict the existence of an additional neutral boson, the Z′. Using data collected by the Belle II experiment during 2018 at the SuperKEKB collider, we perform the first searches for the invisible decay of a Z′ in the process e+e-→μ+μ-Z′ and of a lepton-flavor-violating Z′ in e+e-→e±μZ′. We do not find any excess of events and set 90% credibility level upper limits on the cross sections of these processes. We translate the former, in the framework of an Lμ-Lτ theory, into upper limits on the Z′ coupling constant at the level of 5×10-2-1 for MZ′≤6 GeV/c2.
Operational Experience and Performance of the Belle II Pixel Detector
Proceedings of the 29th International Workshop on Vertex Detectors (VERTEX2020), Tsukuba, Japan (Online); Journal of the Physical Society of Japan 34, 010002 (2021). doi:10.7566/JPSCP.34.010002
Search for Axionlike Particles Produced in e+e− Collisions at Belle II
We present a search for the direct production of a light pseudoscalar a decaying into two photons with the Belle II detector at the SuperKEKB collider. We search for the process e+e-→γa, a→γγ in the mass range 0.2<ma<9.7 GeV/c2 using data corresponding to an integrated luminosity of (445±3) pb-1. Light pseudoscalars interacting predominantly with standard model gauge bosons (so-called axionlike particles or ALPs) are frequently postulated in extensions of the standard model. We find no evidence for ALPs and set 95% confidence level upper limits on the coupling strength gaγγ of ALPs to photons at the level of 10-3 GeV-1. The limits are the most restrictive to date for 0.2<ma<1 GeV/c2.
The Belle II vertex detector integration
Belle II DEPFET, PXD, and SVD Collaborations: et al.
DEPFET pixel detector in the Belle II experiment
Belle II DEPFET and PXD Collaboration: et al.
The Performance of Belle II Data Acquisition System in the First Physics Run
The Belle II experiment is a new generation B-factory experiment at KEK in Japan aiming at the search for New Physics in a huge sample of B-meson dacays. The commissioning of the SuperKEKB accelerator was started in 2017 (Phase 1), and then a pilot run with outer detectors was performed in 2018 (Phase 2). From March this year, an operation with the full detector has been started for the physics data taking (Phase 3). The Belle II data acquisiton system (DAQ) is now fully working in the Phase 3 run. The system consists of the trigger timing distribution system, the common readout modules (COPPER) with the unified optical data link to the detector front end, the readout PCs and the network sw…
Feasibility study for the measurement of πN transition distribution amplitudes at P¯ANDA in p¯p→J/ψπ0
The exclusive charmonium production process in (P) over barp annihilation with an associated pi 0 meson (p) over barp -> J/psi pi(0) is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the J/psi -> e(+) e(-) decay channel with the AntiProton ANnihilation at DArmstadt ((P) over bar ANDA) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the (P) over barp -> pi(+)pi(-)pi(0) and (p) over barp -> J/psi pi(0)pi(0) reactions are performed with PANDAROOT, the simulation and analysis software framework of the (P) over bar ANDA experiment. It is show…
Precise Measurement of the D0 and D+ Lifetimes at Belle II
We report a measurement of the D^{0} and D^{+} lifetimes using D^{0}→K^{-}π^{+} and D^{+}→K^{-}π^{+}π^{+} decays reconstructed in e^{+}e^{-}→cc[over ¯] data recorded by the Belle II experiment at the SuperKEKB asymmetric-energy e^{+}e^{-} collider. The data, collected at center-of-mass energies at or near the ϒ(4S) resonance, correspond to an integrated luminosity of 72 fb^{-1}. The results, τ(D^{0})=410.5±1.1(stat)±0.8(syst) fs and τ(D^{+})=1030.4±4.7(stat)±3.1(syst) fs, are the most precise to date and are consistent with previous determinations.
Belle II pixel detector: Performance of final DEPFET modules
Belle-II DEPFET and PXD Collaboration: et al.
Hydro-MRT bei entzündlichen Darmerkrankungen - Eine koloskopisch-histologische Vergleichsstudie*
PURPOSE To compare hydro-MRI with colonoscopy and biopsy specimen regarding the assessment of inflammatory activity and the differentiation of inflammatory bowel diseases. MATERIAL AND METHODS After an oral bowel opacification using 1000 ml of a 2.5% mannitol solution and a rectal bowel opacification using 250-500 ml of a 0.9% saline solution, axial and coronal breath-hold sequences +/- Gd-DTPA (HASTE-["half-Fourier acquisition single-shot turbo spin echo"] and dynamic FLASH-["fast low angle shot"]) were acquired in 27 patients with inflammatory bowel disease. The enhancement of the bowel wall as well as morphological MRI findings were correlated with colonoscopy and biopsy specimens. By me…
Alignment for the first precision measurements at Belle II
On March 25th 2019, the Belle II detector recorded the first collisions delivered by the SuperKEKB accelerator. This marked the beginning of the physics run with vertex detector. The vertex detector was aligned initially with cosmic ray tracks without magnetic field simultaneously with the drift chamber. The alignment method is based on Millepede II and the General Broken Lines track model and includes also the muon system or primary vertex position alignment. To control weak modes, we employ sensitive validation tools and various track samples can be used as alignment input, from straight cosmic tracks to mass-constrained decays. With increasing luminosity and experience, the alignment is …
Study of doubly strange systems using stored antiprotons
Bound nuclear systems with two units of strangeness are still poorly known despite their importance for many strong interaction phenomena. Stored antiprotons beams in the GeV range represent an unparalleled factory for various hyperon-antihyperon pairs. Their outstanding large production probability in antiproton collisions will open the floodgates for a series of new studies of systems which contain two or even more units of strangeness at the PANDA experiment at FAIR. For the first time, high resolution gamma-spectroscopy of doubly strange Lambda Lambda-hypernuclei will be performed, thus complementing measurements of ground state decays of Lambda Lambda-hypernuclei at J-PARC or possible …
Commissioning and performance of the Belle II pixel detector
Belle-II DEPFET and PXD Collaboration: et al.
The Belle II Pixel Detector Data Acquisition and Background Suppression System
The Belle II experiment at the future SuperKEKB collider in Tsukuba, Japan, features a design luminosity of 8 1035 cm−2s−1, which is a factor of 40 larger than that of its predecessor Belle. The pixel detector (PXD) with about 8 million pixels is based on the DEPFET technology and will improve the vertex resolution in beam direction by a factor of 2. With an estimated trigger rate of 30 kHz, the PXD is expected to generate a data rate of 20 GBytes/s, which is about 10 times larger than the amount of data generated by all other Belle II subdetectors. Due to the large beam-related background, the PXD requires a data acquisition system with high-bandwidth data links and realtime background red…
Data quality monitors of vertex detectors at the start of the Belle II experiment
The Belle II experiment features a substantial upgrade of the Belle detector and will operate at the SuperKEKB energy-asymmetric e+e− collider at KEK in Tsukuba, Japan. The accelerator completed its first phase of commissioning in 2016, and the Belle II detector saw its first electron-positron collisions in April 2018. Belle II features a newly designed silicon vertex detector based on double-sided strip layers and DEPFET pixel layers. A subset of the vertex detector was operated in 2018 to determine background conditions (Phase 2 operation). The collaboration completed full detector installation in January 2019, and the experiment started full data taking. This paper will report on the fin…
The Belle II Physics Book
cd. autorów: L. Cao48,‡, G. Caria145,‡, G. Casarosa57,‡, C. Cecchi56,‡,D. Cˇ ervenkov10,‡,M.-C. Chang22,‡, P. Chang92,‡, R. Cheaib146,‡, V. Chekelian83,‡, Y. Chen154,‡, B. G. Cheon28,‡, K. Chilikin77,‡, K. Cho70,‡, J. Choi14,‡, S.-K. Choi27,‡, S. Choudhury35,‡, D. Cinabro170,‡, L. M. Cremaldi146,‡, D. Cuesta47,‡, S. Cunliffe16,‡, N. Dash33,‡, E. de la Cruz Burelo9,‡, E. de Lucia52,‡, G. De Nardo54,‡, †Editor. ‡Belle II Collaborator. §Theory or external contributing author. M. De Nuccio16,‡, G. De Pietro59,‡, A. De Yta Hernandez9,‡, B. Deschamps129,‡, M. Destefanis60,‡, S. Dey116,‡, F.Di Capua54,‡, S.Di Carlo75,‡, J. Dingfelder129,‡, Z. Doležal10,‡, I. Domínguez Jiménez125,‡, T.V. Dong30,26,…