0000000000128900

AUTHOR

Verónica García-sanz

Response to "Trust, but verify".

research product

Nonsurgical treatment of skeletal anterior open bite in adult patients: Posterior build-ups.

ABSTRACT Objective: To (1) evaluate the efficacy of build-ups in the correction of anterior open bite in adults, (2) evaluate their efficacy in producing molar intrusion, (3) analyze skeletal and dental changes, and (4) assess the long-term stability. Materials and Methods: The sample consisted of 93 lateral cephalograms from 31 patients with skeletal and dental anterior open bite. The patients had received orthodontic treatment consisting of bonded resin blocks on the maxillary molars combined with Tip-Edge Plus bracket appliances. Cephalometric measurements were performed on radiographs taken before treatment (T1), after treatment (T2), and after a retention period (T3), which were analyz…

research product

A comparative study of aesthetic perceptions of malocclusion among general practice dentists, orthodontists and the public using a visual analogue scale (VAS) and the IOTN-AC.

Background Perception of malocclusion varies among individuals and among patients and practitioners. Although several indices that tend to coincide in many aspects and unify criteria, no single index has been recognised as the most suitable for assessing orthodontic treatment need. Moreover, orthodontists are not always aware of the differences in perception of malocclusion between patients and practitioners. Objetives To examine the perception of dental anaesthetics amongst dentists, orthodontists and the general population, study the relationship between the perception of dental aesthetics and the severity of the malocclusion, using the visual analogue scale and the IOTN-AC, and investiga…

research product

Linear and Volumetric Mandibular Asymmetries in Adult Patients With Different Skeletal Classes and Vertical Patterns: A Cone-Beam Computed Tomography Study

AbstractThis study aimed to quantify the height of the mandibular condyle and ramus, condylar volume, and the asymmetry index in adult patients of different sex, skeletal class and vertical pattern using Cone-Beam Computed Tomography (CBCT), and to determine whether there were differences between these groups. The study used CBCT scans of 159 patients with a mean age of 32.32 ± 8.31 years. InVivoDental® software was used to perform both linear (condylar, ramal, and total height) and condylar volume measurements. Linear and volumetric asymmetries were calculated. There were not significant differences between right and left sides. The mean value obtained for condyle height was 7.27 mm, ramus…

research product

Current trends in orthodontic journals listed in Journal Citation Reports. A bibliometric study.

Introduction The aim of this study is to analyze articles published in orthodontic journals included in Journal Citation Reports (JCR) to determine current trends in orthodontic publishing. Methods Articles included in orthodontic journals in 2016 JCR and published during 2007-2017 were selected. After applying inclusion criteria, author-based parameters (article title, first author's name, institution and sex, number of authors, number of affiliations, first author's origin, and geographic origin), article-based parameters (article type, main topic, and research design), and the number of cites and self-cites were registered for each article. Results A total of 7119 articles were analyzed,…

research product

Nonsurgical treatment of an adult with skeletal Class III malocclusion, anterior crossbite, and an impacted canine

Class III malocclusion presents some complexity in terms of diagnosis and treatment and affects not only the jaws but the whole craniofacial complex. Besides, functional forward displacement of the mandible may be diagnosed in a patient presenting Class III malocclusion, as the 2 entities are not incompatible or mutually exclusive. This case report describes the multidisciplinary, nonsurgical, orthodontic treatment of an adult patient with a skeletal Class III malocclusion, anterior crossbite, and a palatally impacted canine, treated with fixed appliances and skeletal anchorage. To upright the mandibular molars, distalize the whole mandibular arch, and avoid excessive inclination of maxilla…

research product

Accuracy and Reliability of Cone-Beam Computed Tomography for Linear and Volumetric Mandibular Condyle Measurements. A Human Cadaver Study

AbstractThe accuracy of Cone-Beam Computed Tomography (CBCT) on linear and volumetric measurements on condyles has only been assessed on dry skulls. The aim of this study was to evaluate the reliability and accuracy of linear and volumetric measurements of mandibular condyles in the presence of soft tissues using CBCT. Six embalmed cadaver heads were used. CBCT scans were taken, followed by the extraction of the condyles. The water displacement technique was used to calculate the volumes of the condyles and three linear measurements were made using a digital caliper, these measurements serving as the gold standard. Surface models of the condyles were obtained using a 3D scanner, and superim…

research product

Comparative Study of Oral Health-Related Quality of Life (OHRQL) between Different Types of Orthodontic Treatment

Background and objectives: Although the main objective of any orthodontic treatment is to correct malocclusion, a range of psychosocial and/or esthetic factors drive patients to undergo orthodontic treatment. The aim of the present study was to analyze variations in oral health-related quality of life (OHRQL) levels in patients undergoing orthodontic treatment by means of four types of appliances: fixed buccal metal brackets, fixed buccal esthetic/ceramic brackets, fixed lingual brackets, and clear aligners. Material and Methods: The study sample comprised 120 patients aged 18 to 68 years who attended the Orthodontic department at the Dental Clinic of the University of Valencia. The Index o…

research product

Titanium plate removal in orthognathic surgery: prevalence, causes and risk factors. A systematic literature review and meta-analysis

The purpose of this review was to analyse the prevalence of titanium plate removal in orthognathic surgery, as well as the causes of plate removal, and to determine the associated risk factors. A thorough search of the PubMed, Scopus, Embase, and Web of Science databases was conducted. The inclusion criteria were studies of adult patients who underwent orthognathic surgery in which monocortical titanium plates and screws were placed. Of the 325 references identified, 19 were included in the qualitative synthesis and meta-analysis. Overall, 13.4% (95% confidence interval (CI) 9.6-18.3%) of the patients required the removal of at least one titanium plate; 9.7% (95% CI 6.3-14.6%) of the plates…

research product

Antibacterial Properties of Nanoparticles in Dental Restorative Materials. A Systematic Review and Meta-Analysis

Background and Objectives: Nanotechnology has become a significant area of research focused mainly on increasing the antibacterial and mechanical properties of dental materials. The aim of the present systematic review and meta-analysis was to examine and quantitatively analyze the current evidence for the addition of different nanoparticles into dental restorative materials, to determine whether their incorporation increases the antibacterial/antimicrobial properties of the materials. Materials and Methods: A literature search was performed in the Pubmed, Scopus, and Embase databases, up to December 2018, following PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) …

research product

Effect of rapid maxillary expansion on sleep apnea-hypopnea syndrome in growing patients. A meta-analysis.

Background Changes produced in the upper airway after rapid maxillary expansion makes this procedure a therapeutic option for treating sleep apnea-hypopnea syndrome (SAHS) in children. The objective of this systematic review and meta-analysis was to analyze the evidence available for the effects of rapid maxillary expansion (RME) on SAHS, analyzing changes produced in oximetric variables: apnea-hypopnea index (AHI); oxygen saturation (SO2); sleep efficiency (SE), total sleep time (TST), percentage of rapid eye movement (REM) phase; and arousal index (AI). Material and Methods An electronic search was conducted in the PubMed, Scopus, Embase, and Cochrane databases, and in grey literature (Op…

research product

Effects of femtosecond laser and other surface treatments on the bond strength of metallic and ceramic orthodontic brackets to zirconia.

Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond lasertreated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zirconia.Three hundred zirconia plates were divided into five groups: 1) control (C); 2) sandblasting (APA); 3) silica coating and silane (SC); 4) femtosecond laser (FS); 5) sandblasting followed by femtosecond laser (APA+SC). A thermal imaging camera measured temperature changes in the zirconia during irrad…

research product

Alveolar bone height and thickness assessed by CBCT

Abstract Objectives To seek information regarding the relationship between the quantity of alveolar bone and the angle and sagittal position of the incisors. This was to be further determined in relation to the basal bones and facial pattern with the aim of establishing a predictive model based on the study of a lateral cephalogram. Methods The distance from the cemento-enamel junction to the labial alveolar crest and the bone thickness half-way along the root of the most prominent upper and lower incisor were measured in a sample of 100 cone beam computed tomography (CBCT) scans of patients aged between 15 and 34 years. Lateral cephalograms of the patients were extracted from the scans and…

research product

Effect of 2% Chlorhexidine Following Acid Etching on Microtensile Bond Strength of Resin Restorations: A Meta-Analysis.

Background and Objectives: The aim of this systematic review was to examine the effect of 2% chlorhexidine following acid etching on the microtensile bond strength of resin restorations for different follow-up times. Materials and Methods: A thorough search of PubMed, Scopus, and Embase databases were conducted. In vitro experimental studies or in vivo studies published up to December 2018 with an experimental group treated with a 2% chlorhexidine solution following acid etching and a control group were included, wherein the final restoration used a resin composite in both the groups. Results: Twenty-one articles were identified for qualitative analysis and 18 for meta-analysis. The differe…

research product

The effects of lasers on bond strength to ceramic materials: A systematic review and meta-analysis

Lasers have recently been introduced as an alternative means of conditioning dental ceramic surfaces in order to enhance their adhesive strength to cements and other materials. The present systematic review and meta-analysis aimed to review and quantitatively analyze the available literature in order to determine which bond protocols and laser types are the most effective. A search was conducted in the Pubmed, Embase and Scopus databases for papers published up to April 2017. PRISMA guidelines for systematic review and meta-analysis were followed. Fifty-two papers were eligible for inclusion in the review. Twenty-five studies were synthesized quantitatively. Lasers were found to increase bo…

research product

Effectiveness of removable appliances with temperature sensors in orthodontic patients: a systematic review and meta-analysis

Summary Background/objective Patient compliance during orthodontic treatment is one of the factors that most affects success in the final result. The use of removable appliances is frequent at an early age and the monitoring of its use is essential to assess the collaboration of the patient. The aim of this study was to establish the effectiveness of microsensors included in removable appliances during orthodontic treatment or in the retention phase to enable a reliable and individualized follow-up of the patient. Search methods The article search was carried out in various electronic databases and journals without any language restrictions. Selection criteria Studies using microsensors int…

research product

Oral health-related quality of life of adolescents after orthodontic treatment. A systematic review

Background Given the prevalence of malocclusions and the impact they have on oral health, patients' quality of life assessments provide useful information, not only in terms of patients' needs and expectations before treatment, but about whether or not orthodontic treatments meet them satisfactorily. The present systematic review was carried out to evaluate changes in the quality of life of adolescent patients after orthodontic treatment. Material and methods An electronic search was conducted in the Pubmed, Embase, Cochrane and Scopus databases. The review followed PRISMA guidelines for systematic reviews and meta-analyses. Results Of the 817 studies identified in the initial search, only …

research product

Changes in the alveolar bone thickness of maxillary incisors after orthodontic treatment involving extractions ? A systematic review and meta-analysis

Background Orthodontic treatment involving en-masse retraction of incisors following premolar extractions, may induce morphological alterations of the alveolar bone surrounding the anterior teeth. Objective To assess changes in alveolar bone thickness around the incisors of extraction patients measured with CBCT. Material and methods An electronic search was conducted in PubMed, Scopus, Embase and Cochrane Library, using search terms, with no limitation on publication date, up to April 2018. The articles selected for analysis included randomized controlled trials, case-control studies and cohort studies of patients treated with fixed appliances and premolar extractions, which had measured a…

research product

Miniscrew mechanics for molar distalization and incisor intrusion in a patient with a Class II brachyfacial pattern and gummy smile

A gummy smile is one of the most problematic characteristics in patients with a Class II Division 2 malocclusion, and the correction of vertical position and incisor torque is often challenging for the orthodontist. This case report describes the orthodontic treatment of a 31-year-old woman, assisted by miniscrew mechanics for maxillary arch distalization and correction of a gummy smile with a brachyfacial pattern. Two different mechanics were used. Miniscrews were placed in both maxillary tuberosities, and the maxillary arch was successfully distalized, correcting the Class II relationship. Interradicular miniscrews were placed for maxillary and mandibular incisor intrusion to correct the …

research product

A skeletal Class III malocclusion with agenesis and canine-bicuspid transposition: a nonsurgical approach

Abstract Background The present case report describes the orthodontic management of a patient who presented with a skeletal Class III malocclusion combined with other dental anomalies. The malocclusion was complicated by agenic maxillary lateral incisors and a lower right second premolar, in company with the transposition of the maxillary canines and premolars. Methods Dentoalveolar compensation of the anteroposterior jaw relationship was performed. The upper deciduous lateral incisors were extracted and the spaces closed, so that the first premolars replaced the missing lateral incisors while the canine transposition was maintained Results Satisfactory results were obtained which provided …

research product