0000000000214376
AUTHOR
Jan Seiwert
Hyperbranched Polyols via Copolymerization of 1,2-Butylene Oxide and Glycidol: Comparison of Batch Synthesis and Slow Monomer Addition
Hyperbranched poly(butylene oxide) polyols have been synthesized by multibranching anionic ring-opening copolymerization of 1,2-butylene oxide and glycidol. Systematic variation of the composition from 24 to 74% glycidol content resulted in a series of moderately distributed copolymers (Đ = 1.41–1.65, SEC), albeit with limited molecular weights in the solvent-free batch process in the range of 900–1300 g mol–1 (apparent Mn determined by SEC with PEG standards). In situ monitoring of the copolymerization kinetics by 1H NMR showed a pronounced compositional drift with respect to the monomer feed, indicating a strongly tapered microstructure caused by the higher reactivity of glycidol. In the …
Thioether-Bearing Hyperbranched Polyether Polyols with Methionine-Like Side-Chains: A Versatile Platform for Orthogonal Functionalization
The synthesis of thioether-bearing hyperbranched polyether polyols based on an AB/AB2 type copolymerization (cyclic latent monomers) is introduced. The polymers are prepared by anionic ring-opening multibranching copolymerization of glycidol and 2-(methylthio)ethyl glycidyl ether (MTEGE), which is conveniently accessible in a single etherification step. Slow monomer addition provides control over molecular weights. Moderate dispersities (Đ = 1.48–1.85) are obtained, given the hyperbranched structure. In situ 1H NMR copolymerization kinetics reveal reactivity ratios of rG = 3.7 and rMTEGE = 0.27. Using slow monomer addition, copolymer composition can be systematically varied, allowing for th…
Controlled Synthesis of Multi-Arm Star Polyether-Polycarbonate Polyols Based on Propylene Oxide and CO2
Multi-arm star copolymers based on a hyperbranched poly(propylene oxide) polyether-polyol (hbPPO) as a core and poly(propylene carbonate) (PPC) arms are synthesized in two steps from propylene oxide (PO), a small amount of glycidol and CO2 . The PPC arms are prepared via carbon dioxide (CO2 )/PO copolymerization, using hbPPO as a multifunctional macroinitiator and the (R,R)-(salcy)CoOBzF5 catalyst. Star copolymers with 14 and 28 PPC arms, respectively, and controlled molecular weights in the range of 2700-8800 g mol(-1) are prepared (Mw /Mn = 1.23-1.61). Thermal analysis reveals lowered glass transition temperatures in the range of -8 to 10 °C for the PPC star polymers compared with linear …
Hyperbranched Poly(propylene oxide): A Multifunctional Backbone-Thermoresponsive Polyether Polyol Copolymer
Backbone-thermoresponsive hyperbranched poly(propylene oxide)-based polyether polyols have been synthesized by anionic ring-opening copolymerization of glycidol and propylene oxide. The number of functional hydroxyl end groups and the lower critical solution temperature (LCST) can be readily adjusted by varying the comonomer ratio. Molecular weights in the range of 1200-2000 g/mol were achieved. Hyperbranched polyether polyols with LCST values between 24 and 83 °C can be obtained in a convenient one-step reaction.
Multiarm Polycarbonate Star Polymers with a Hyperbranched Polyether Core from CO2 and Common Epoxides
Multiarm star copolymers, consisting of hyperbranched poly(ethylene oxide) (hbPEO) or poly(butylene oxide) (hbPBO) polyether copolymers with glycerol branching points as a core, and linear aliphatic polycarbonate arms generated from carbon dioxide (CO2) and epoxide monomers, were synthesized via a “core-first” approach in two steps. First, hyperbranched polyether polyols were prepared by anionic copolymerization of ethylene oxide or 1,2-butylene oxide with 8–35% glycidol with molecular weights between 800 and 389,000 g·mol–1. Second, multiple arms were grown via immortal copolymerization of CO2 with propylene oxide or 1,2-butylene oxide using the polyether polyols as macroinitiators and (R,…
Hyperbranched Poly(ethylene glycol) Copolymers: Absolute Values of the Molar Mass, Properties in Dilute Solution, and Hydrodynamic Homology
Hyperbranched poly(ethylene glycol) copolymers were synthesized by random anionic ring-opening multibranching copolymerization of ethylene oxide with glycidol as a branching agent, leading to poly(ethylene glycol) structure with glycerol branching points. Extending the available range of molar masses by novel synthesis strategies, a limited extent of control over the degree of polymerization was achieved by variation of the solvent in this copolymerization. Generally, absolute molar mass characterization of hyperbranched polymers still represents an unresolved challenge. A series of the hyperbranched poly(ethylene glycol)-co-(glycerol) copolymers (hbPEGs) of a wide range of molar masses (14…
Capillary Imbibition, Crystallization, and Local Dynamics of Hyperbranched Poly(ethylene oxide) Confined to Nanoporous Alumina
The crystallization and dynamics of hyperbranched poly(ethylene oxide) (hbPEO), obtained from the direct random copolymerization of EO and glycidol (PEO-co-PG), are studied both in bulk and within nanoporous alumina (AAO). Copolymerization decreases the degree of crystallinity and lowers the crystallization and melting temperatures as compared to linear PEO. The dynamics of capillary imbibition within AAO followed the t1/2 prediction but is slower than predicted by the classical Lucas–Washburn equation. The most prominent effect of confinement is the change in nucleation mechanism—from heterogeneous nucleation in bulk to homogeneous nucleation inside AAO. The homogeneous nucleation temperat…
Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation.
The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazen…
Copolymerization Kinetics of Glycidol and Ethylene Oxide, Propylene Oxide, and 1,2-Butylene Oxide: From Hyperbranched to Multiarm Star Topology
Copolymerization of established epoxide monomers with glycidol (G) is a key reaction to prepare branched or hyperbranched polyethers. The kinetics of the multibranching anionic ring-opening copolymerization of glycidol (a cyclic latent AB2 monomer) with ethylene oxide (EO), propylene oxide (PO), and 1,2-butylene oxide (BO; cyclic latent AB monomers), respectively, in dimethyl sulfoxide was studied. Online 1H NMR spectroscopy was employed for in situ monitoring of the individual monomer consumption during the entire course of the statistical copolymerization. Varying the counterion, both the cesium alkoxide and potassium alkoxide initiated copolymerization were studied and compared. From the…