Photochemical Synthesis of Water-Soluble Gold Nanorods: The Role of Silver Ions in Assisting Anisotropic Growth

2009

The role of Ag+ ions in the ultraviolet-driven photochemical synthesis of Au nanorods (NRs) in aqueous surfactant mixtures has been investigated in order to elucidate the mechanism that drives anisotropic nanoparticle growth. The samples, grown in the presence of varying amounts of Ag+ ions for scheduled irradiation times, have been characterized by ultraviolet−visible−near infrared (UV−vis−NIR) absorption spectroscopy, analytical transmission electron microscopy (ATEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and extended X-ray absorption fine structure (EXAFS) measurements. Moreover, the time evolution of size and shape distribution has been investigated by stat…

Crossing the boundary between face-centred cubic and hexagonal close packed: the structure of nanosized cobalt is unraveled by a model accounting for…

2014

The properties of nanostructured cobalt in the fields of magnetic, catalytic and biomaterials depend critically on Co close packing. This paper reports a structural analysis of nanosized cobalt based on the whole X-ray diffraction (XRD) pattern simulation allowed by the Debye equation. The underlying structural model involves statistical sequences of cobalt layers and produces simulated XRD powder patterns bearing the concurrent signatures of hexagonal and cubic close packing (h.c.p. and f.c.c.). Shape, size distribution and distance distribution between pairs of atoms are also modelled. The simulation algorithm allows straightforward fitting to experimental data and hence the quantitative …

Indium Doping in Barium Cerate: the Relation between Local Symmetry and the Formation and Mobility of Protonic Defects

2007

The solid solution series Ba(In,Ce)O3-ä has been investigated with respect to structure, formation, and mobility of protonic defects. Compared to the limited solubility of Y2O3 in BaCeO3 and BaZrO3, the complete solubility of In2O3 is suggested to reflect a relation between absolute hardness of the dopant and the ease of insertion into the hosting lattices. Extended X-ray absorption fine structure (EXAFS) was used to probe the local environment of In3+ in barium cerate: in the surroundings of the dopant, the orthorhombic structure is strongly modified, resulting in an increase of local symmetry. The InO6 octahedra are very regular, and there is no indication for any defect clustering. This …

Structure and the metal-support interaction of the Au/Mn oxide catalysts

2010

Gold catalysts with loading 1 and 10 wt % were-prepared by deposition precipitation method with urea over mesoporous manganese oxide, obtained through a surfactant-assisted procedure by using cetyltrimethylammonium bromide (CTAB), followed by treatment with sulphuric acid. For comparison, Au(10 wt %) was also deposited over commercial CeO2 and SiO2 supports. The materials were characterized by XRD and EXAFS at the Mn K and Au L-III edges and XPS. Moreover, the analyses were performed on the samples treated under 1%CO/He, at 250 degrees C for 90 min. The structural and surface results of the as prepared manganese oxide confirmed the formation of gamma-MnO2 along with some amorphous Mn3O4 upo…

X-ray Spectroscopy of (Ba,Sr,La)(Fe,Zn,Y)O3-δIdentifies Structural and Electronic Features Favoring Proton Uptake

2020

Mixed protonic–electronic conducting oxides are key functional materials for protonic ceramic fuel cells. Here, (Ba,Sr,La)(Fe,Zn,Y)O3−δ perovskites are comprehensively investigated by X-ray spectroscopy (in oxidized and reduced states). Extended X-ray absorption fine structure shows that Zn,Y doping strongly increases the tendency for Fe–O–Fe buckling. X-ray absorption near-edge spectroscopy at the Fe K-edge and X-ray Raman scattering at the O K edge demonstrate that both iron and oxygen states are involved when the samples are oxidized, and for the Zn,Y doped materials, the hole transfer from iron to oxygen is less pronounced. This can be correlated with the observation that these material…

Electrode–Electrolyte Compatibility in Solid-Oxide Fuel Cells: Investigation of the LSM–LNC Interface with X-ray Microspectroscopy

2015

Ca:LaNbO4 (LNC) constitutes the last real breakthrough in high-temperature proton conductors, with better chemical and mechanical stability with respect to cerate and zirconate perovskites. However, the low amount of bivalent dopant that can be hosted in the LaNbO4 matrix poses a limit to the proton concentration in the electrolyte. Using synchrotron X-ray microspectroscopy, we investigated the compatibility of annealed LNC/LSM electrolyte/cathode bilayers for proton-conducting SOFCs. The element maps are complemented by microEXAFS and microXANES, giving information on the fate of different cations after diffusion. The X-ray microspectroscopy approach described here is applied for the first…

Local environment of Barium, Cerium and Yttrium in BaCe1−xYxO3−δ ceramic protonic conductors

2007

Abstract Y-doped barium cerate protonic conductors with composition BaCe 1 −  x Y x O 3 −  δ ( x  = 0.02, 0.1, 0.2, 0.3) have been synthesized by sol–gel route, giving by X-ray diffraction tests a homogeneous crystalline phase. A commercial sample BaCe 0.8 Y 0.2 O 3 −  δ produced by combustion spray pyrolysis was also provided for comparison aim. The local structure around the cations was studied by X-ray absorption spectroscopy at the K-edges of Ba, Ce and Y. It is demonstrated that the insertion of yttrium in the site of cerium produces a remarkable local distortion of the dopant first-shell octahedral environment that affects also the next coordination shells by a static disorder increas…

Dopants and defects: local structure and dynamics in barium cerates and zirconates

2010

In this paper we present an overview of state-of-the-art EXAFS measurements and data analysis on Ba, Ce, Zr, Y, In and Gd local environments in Y:BaCeO3, In:BaCeO3, Gd:BaCeO3, Y:BaZrO3, and In:BaZrO3, at different temperatures, hydration degrees and doping levels. This approach allows to reach unprecedented insights on the peculiar role of the dopant, and its interactions with the other lattice defects. In particular, we evidence that each different dopant shows unique behavior, depending mainly on its electronic structure, and that the usual criterion of ionic radius matching is not useful to outline an effective doping strategy of proton-conducting perovskites. As what concerns the struct…

Structure of the Metal–Support Interface and Oxidation State of Gold Nanoparticles Supported on Ceria

2012

An Au/CeO2 model catalyst was prepared by deposition–precipitation, with the aim of obtaining a sample suitable for a detailed X-ray absorption fine structure (XAFS) analysis of the gold–ceria interface structure. The results demonstrate the existence of a large interface between the gold particle and the support oxide, characterized by well-defined Au–O and Au–Ce interactions extending up to ∼6.4 A. The complex interface structure is retained after CO treatment up to 250 °C and subsequent reoxidation at 400 °C. The analysis of the XANES spectra, and the Au–O distance of 2.21 A, longer than Au–O bond lengths previously reported for Au/ceria catalysts, suggest a low oxidation state for the g…

Solid-state compatibility of Ca:LaNbO4 with perovskite cathodes: Evidences from X-ray microspectroscopy

2022

The solid-state compatibility between calcium-doped lanthanum niobate and three perovskite cathode materials was investigated using two X-ray microbeam techniques, micro X-ray fluorescence and micro X-ray absorption spectroscopy. The cathode powders (lanthanum strontium ferrite, either cobalt or copper-doped, and lanthanum strontium cobaltite) in contact with the dense electrolyte pellet were annealed at 1150 degrees C for 12-144 h to simulate the effect of thermal stresses due to fabrication and long-term operation. As a result, several interdiffusion phenomena were then observed on the bilayer cross-sections: in particular, the chemical state and coordination environment of calcium, iron,…

Covalent and Ionic Functionalization of HLN Layered Perovskite by Sonochemical Methods

2017

We describe the functionalization of the layered perovskite HLaNb2O7 with n-propanol, n-decanol, 3-mercaptopropyl-trimethoxysilane, imidazole, n-decylamine, and histamine. The use of sonication is found to significantly improve the reaction yield and to reduce the reaction time, compared to conventional thermal treatment under reflux. The obtained intercalates are thoroughly characterized through the use of several complementary experimental techniques (scanning electron microscopy, IR spectroscopy, X-ray diffraction, thermogravimetric analysis, magic-angle spinning NMR), clarifying their structure and chemical bonding. The implications for the design of inorganic–organic composite material…

Structure and oxide ion conductivity: local order, defect interactions and grain boundary effects in acceptor-doped ceria

2014

The long-range and short-range structure of nanocrystalline and microcrystalline acceptor-doped ceria is investigated by a combined approach using EXAFS, XANES, Raman, and XRD, and correlated with the oxide-ion conductivity in the bulk and in grain boundaries. Compared to Yb3+ and Er3+, the positive influence of Sm3+ is attributed to the ability to repel oxygen vacancies, and to keep a localized disorder around the dopant. The long-range structural analysis shows lattice contraction for Yb- and Er-doping and lattice expansion for Sm-doping. The short-range analysis around the dopants and cerium highlights that a more complex structural rearrangement has to be assumed to explain the compleme…

Supramolecular Hydro- and Ionogels: A Study of Their Properties and Antibacterial Activity.

2017

Diimidazolium-based organic salts, bearing peptides or amino acids as anions have been synthesised and tested for their gelling ability in biocompatible solvents. These low molecular weight salts were successfully used as gelators in phosphate buffered saline (PBS) solution and ionic liquids. Then, the properties of the obtained soft materials were analysed in terms of melting temperature and gel strength as accounted for by rheological investigations. The gel-phase formation was studied by using UV/Vis and resonance light scattering measurements, whereas the morphology of the soft materials was analysed by using polarised optical microscopy and scanning electron microscopy. To get informat…

Dopant Clusterization and Oxygen Coordination in Ta-Doped Bismuth Oxide: A Structural and Computational Insight into the Mechanism of Anion Conduction

2015

Bi2O3 in its fluorite-like form can be obtained either at 730-824 °C, showing the highest oxide-ion conduction known so far, or by doping. We present a comprehensive appraisal of the local atomic structure of Ta-doped Bi2O3 investigating by X-ray absorption spectroscopy the aggregation motifs of Ta5+ and the interaction between dopants and oxygen vacancies. Using periodic density functional theory simulations, we show that the connection of Ta4O18 aggregates is energetically favorable. We find that the local coordination of Bi3+ and its electronic structure, as seen from the calculated density of states (DOS), are invariably determined by the Bi 6s2 lone pair in both doped and undoped Bi2O3…

Interface Solid-State Reactions in La0.8Sr0.2MnO3/Ce0.8Sm0.2O2 and La0.8Sr0.2MnO3/BaCe0.9Y0.1O3 Disclosed by X-ray Microspectroscopy

2019

The stability of the electrode/electrolyte interface is a critical issue in solid-oxide cells working at high temperatures, affecting their durability. In this paper, we investigate the solid-state chemical mechanisms that occur at the interface between two electrolytes (Ce0.8Sm0.2O2, SDC, and BaCe0.9Y0.1O3, BCY) and a cathode material (La0.8Sr0.2MnO3, LSM) after prolonged thermal treatments. Following our previous work on the subject, we used X-ray microspectroscopy, a technique that probes the interface with submicrometric resolution combining microanalytical information with the chemical and structural information coming from space-resolved X-ray absorption spectroscopy. In LSM/BCY, the …

Effect of Pre-Reduction on the Properties and the Catalytic Activity of Pd/Carbon Catalysts: A Comparison with Pd/Al2O3

2013

The effect of pre-reduction in solution with chemical reagents on the catalytic performance and catalyst properties of Pd/carbon catalysts was systematically investigated with a multitechnique approach. The results are critically discussed in comparison to those recently obtained on analogous Pd/alumina catalysts. It was proved that the Pd phase on the carbon surface is characterized by a high mobility, opposite to what occurs on alumina. As a result, the Pd particles on carbon aggregate together during pre-reduction, with a consequent decrease in available metal surface. Pd particles remain aggregated also in reaction conditions; the decreased Pd dispersion negatively affects the catalyst …

Long-Range and Short-Range Structure of Proton-Conducting Y:BaZrO3

2011

Yttrium-doped barium zirconate (BZY) is the most promising candidate for proton-conducting ceramics and has been extensively studied in recent years. The detailed features of the crystal structure, both short-range and long-range, as well as the crystal chemistry driving the doping process, are largely unknown. We use very high resolution X-ray diffraction (HR-XRD) to resolve the crystal structure, which is very slightly tetragonally distorted in BZY, while the local environment around Zr4+ and Y3+ is probed with extended X-ray absorption fine structure (EXAFS), and the symmetry and vibrations are investigated by using Raman spectroscopy. It is found that barium zirconate shows some degree …

Highly Stable Thin Films Based on Novel Hybrid 1D (PRSH)PbX3 Pseudo-Perovskites

2021

In this study, the structure and morphology, as well as time, ultraviolet radiation, and humidity stability of thin films based on newly developed 1D (PRSH)PbX3 (X = Br, I) pseudo-perovskite materials, containing 1D chains of face-sharing haloplumbate octahedra, are investigated. All films are strongly crystalline already at room temperature, and annealing does not promote further crystallization or film reorganization. The film microstructure is found to be strongly influenced by the anion type and, to a lesser extent, by the DMF/DMSO solvent volume ratio used during film deposition by spin-coating. Comparison of specular X-ray diffraction and complementary grazing incidence X-ray diffract…

Dopant-Host oxide interactions and proton mobility in Gd:BaCeO3

2009

The local structure of Gd:BaCeO3 at different dopant concentrations (2-20%) was studied by X-ray absorption spectroscopy. The EXAFS analysis shows that the environment of the regular Ba2+ and Ce4+ cations is to a limited extent affected by doping. The local structure of gadolinium shows an expansion of the first coordination shell of oxygens, consistent with the ionic radius of Gd3+, but a contraction of the next neighboring shells of cations. In particular, the Ba2+ second neighbors get closer to the dopant, which can be originated by the effective negative charge sharply localized on the dopant. Comparison between EXAFS data of dry and hydrated compounds confirms this interpretation, show…

Proton sponge lead halides containing 1D polyoctahedral chains

2021

Hybrid one-dimensional lead halides, containing the protonated 1,8-bis(dimethylamino)naphthalene moiety (C14H19N2, monoprotonated "proton sponge"), were prepared by simple one-pot methods and investigated in terms of crystal structure, morphology, thermal stability and electronic properties. The as-precipitated (C14H19N2)PbBr3 and (C14H19N2)PbI3 species are isostructural and crystallize in the orthorhombic Pbca space group, resulting in 1D crystal phases with ([PbX3](-))(infinity) chains (built by face-sharing [PbX6] octahedra; X = Br, I), among which the (C14H19N2)(+) cations are inserted. The two compounds display complete miscibility in the solid state: both (C14H19N2)PbI2Br and (C14H19N…

Toward tailorable surfaces: a combined theoretical and experimental study of lanthanum niobate layered perovskites.

2014

A comprehensive theoretical investigation of the MLaNb2O7 (M = H, Li, Na, K, Rb, and Cs) series of ion-exchangeable layered perovskite is presented. These perovskites are in particular interesting in view of their potential applications as inorganic supports for the design of new hybrid inorganic-organic proton conductors. In particular, their structural and electronic properties have been investigated by periodic calculations in the framework of Density Functional Theory, using different exchange-correlation functionals. A general very good agreement with the available experimental (XRD, NPD, and EXAFS) data has been found. The structure of the protonated HLaNb2O7 form has also been furthe…

Decorated pottery study: Analysis of pigments by x-ray absorbance spectroscopy measurements

2007

Characterization of pigments on decorated pottery fragments has been fully carried out by nondestructive x-ray absorbance spectroscopy (XAS). The samples were a series of pottery shards excavated from the archeological site of Caltagirone (Sicily, Italy), a well-known ceramic production center. Aesthetical criteria and morphological observations allowed us to attribute the samples to quite different historical periods, starting from the 18th century B.C. up to the 16th century A.D. An extensive time interval led us to suppose that different materials and techniques were used for the production of the ceramic paste and also for the preparation of pigments. XAS measurements were performed at …

Bi3+doping in 1D ((CH3)3SO)PbI3: A model for defect interactions in halide perovskites

2022

The recently described monodimensional hybrid pseudo-perovskite ((CH3)3SO)PbI3 exhibits complete Pb2+/Bi3+ miscibility in the B site. Heterovalent substitution imposes that charge-compensating defects are introduced in the lattice as well. This paper reports the energetics of point defects and the interaction between charge-compensating defects that occur upon Bi3+ doping in ((CH3)3SO)PbI3. Periodic DFT simulations were employed to analyze the formation energy of Pb2+ vacancies, (CH3)3SO+ vacancies, iodide vacancies, or the insertion of interstitial iodide ions. Solid solutions with a large Bi3+ content were modeled considering different charge compensation defects (Pb2+ vacancies, (CH3)3SO…

A new cell for the study of in situ chemical reactions using X-ray absorption spectroscopy

2005

An in situ cell for reductive and oxidative treatments at different temperatures that allows the possibility of recording data as a function of temperature has been designed and constructed for X-ray absorption experiments at the GILDA beamline BM08 of ESRF. The cell is linked to a mass quadrupole spectrometer providing control of the reaction gases and monitoring of the products. The apparatus allows measurements to be performed both in transmission and fluorescence geometry. The cell was tested by studying the CO oxidation reaction promoted by a Pt/ceria-zirconia-supported catalyst. The CO(2) yield is correlated with the structural results confirming the existence of a strong metal-suppor…

Synchrotron Radiation-Based Micro-XANES and Micro-XRF Study of Unsuccessfully Produced Egyptian Blue from the Late Hellenistic Production Site of Kos…

2021

International audience; This paper examines the production technology of Egyptian blue, an ancient artificial pigment, through the investigation of an unsuccessfully produced pellet derived from the Hellenistic production site of Kos (Dodecanese, Greece). This heterogeneous material was investigated by a combination of laboratory and synchrotron radiation-based (SR) techniques: scanning electron microscopy coupled with energy-dispersive Xray spectrometry, micro-Raman spectroscopy, high-resolution SR micro-X-ray fluorescence spectroscopy, and SR micro-X-ray absorption near-edge structure spectroscopy (XANES), at the ID21 beamline of the European Synchrotron Radiation Facility. Principal comp…

Heterovalent BiIII/PbII ionic substitution in one-dimensional trimethylsulfoxonium halide pseudo-perovskites (X = I, Br)

2021

We report on the synthesis and characterization of novel lead and bismuth hybrid (organic-inorganic) iodide and bromide pseudo-perovskites (ABX3) containing the trimethylsulfoxonium cation (CH3)3SO+ (TMSO) in the A site, Pb/Bi in the B site, and Br or I as X anions. All of these compounds are isomorphic and crystallize in the orthorhombic Pnma space group. Lead-based pseudo-perovskites consist of one-dimensional (1D) chains of face-sharing [PbX6] octahedra, while in the bismuth-based ones, the chains of [BiX6] are interrupted, with one vacancy every third site, leading to a zero-dimensional (0D) local structure based on separated [Bi2I9]3- dimers. Five solid solutions for the iodide with di…

Local structure of gallate proton conductors

2009

Lanthanum barium gallate proton conductors are based on disconnected GaO4 groups. The insertion of hydroxyls in the LaBaGaO4 network proceeds through self-doping with Ba2+, consequent O2- vacancy formation to fulfill charge neutrality. With a structural investigation on self-doped LaBaGaO4 oxides using synchrotron XRD and EXAFS on the Ga K-edge, we find that: (a) the GaO4 tetrahedra retain their size throughout the whole series; (b) the GaO4 tetrahedra rotate as rigid bodies on hydration, leading to the formation of a network of shorter O-O configurations that are stabilized by hydrogen bonds; (c) contraction of the lattice occurs along the a unit cell axis, as a consequence of an overall s…

Modeling bismuth insertion in 1D hybrid lead halide TMSO(Pb x Bi y )I3 pseudo-perovskites

2022

Abstract The structures of the disordered 1D (pseudo-)perovskites of general TMSO(Pb x Bi y )I3 formulation [TMSO = (CH3)3SO+], obtained by doping the TMSOPbI3 species with Bi3+ ions, are investigated through the formulation of a statistical model of correlated disorder, which addresses the sequences of differently occupied BI6 face-sharing octahedra (B = Pb, Bi or vacant site) within ideally infinite [(BI3)−] n chains. The x-ray diffraction patterns simulated on the basis of the model are matched to the experimental traces, which show many broad peaks with awkward (nearly trapezoidal) shapes, under the assumption that the charge balance is fully accomplished within each chain. The analysis…

X-ray Absorption under Operating Conditions for Solid-Oxide Fuel Cells Electrocatalysts: The Case of LSCF/YSZ

2019

We describe a novel electrochemical cell for X-ray absorption spectroscopy (XAS) experiments during electrical polarization suitable for high-temperature materials such as those used in solid oxide fuel cells. A half-cell LSCF/YSZ was then investigated under cathodic and anodic conditions (850 &deg

A real-space approach to the analysis of stacking faults in close-packed metals: G(r) modelling and Q-space feedback

2019

An R-space approach to the simulation and fitting of a structural model to the experimental pair distribution function is described, to investigate the structural disorder (distance distribution and stacking faults) in close-packed metals. This is carried out by transferring the Debye function analysis into R space and simulating the low-angle and high-angle truncation for the evaluation of the relevant Fourier transform. The strengths and weaknesses of the R-space approach with respect to the usual Q-space approach are discussed.

Dynamic Role of Gold d-Orbitals during CO Oxidation under Aerobic Conditions

2022

High-energy-resolution fluorescence detection-X-ray absorption near-edge structure (HERFD-XANES) at the Au L3 edge was used to study gold catalysts supported on ceria in order to unravel the role of gold 5d orbital modifications during the activation of molecular oxygen. The variations in the HERFD-XANES resonance peak, which are directly correlated with the d-band occupancy, were monitored in situ during the redox process of the CO oxidation at room temperature under both aerobic and anaerobic conditions. Interestingly, upon the oxidation treatment and also during the aerobic CO oxidation treatment, the gold d-band fluctuates around an average value, proving that the gold clusters are part…

Long-Term Stability of TiS2–Alkylamine Hybrid Materials

2022

Layered TiS2 intercalated with linear alkylamines has recently attracted significant interest as a model compound for flexible n-type thermoelectric applications, showing remarkably high power factors at room temperature. The thermal and, particularly, environmental stability of such materials is, however, a still an open challenge. In this paper, we show that amine-intercalated TiS2 prepared by a simple mechanochemical process is prone to chemical decomposition through sulfur exsolution, and that the presence of molecular oxygen is likely to mediate the decomposition reaction. Through computational analysis of the possible reaction pathways, we propose that Ti-N adducts are formed as a con…

Formation and growth of palladium nanoparticles inside porous poly(4-vinyl-pyridine) monitored by operando techniques: The role of different reducing…

2017

In this work we followed the formation of palladium nanoparticles, starting from palladium (II) acetate precursor, inside a poly(4-vinylpyridine-co-divinylbenzene) polymer in presence of different reducing agents. The formation and growth of palladium nanoparticles in presence of H-2 was followed as a function of temperature by simultaneous XANES-SAXS techniques, coupled with DRIFT spectroscopy in operando conditions. It was found that the pyridyl functional groups in the polymer plays a fundamental role in the stabilization of the palladium (II) acetate precursor, as well as in the stabilization of the palladium nanoparticles. The effect of a thermal treatment in alcohol (ethanol and 2-pro…

Proton Dynamics in In:BaZrO3: Insights on the Atomic and Electronic Structure from X-ray Absorption Spectroscopy

2009

The local structure of Ba2+, Zr4+, and In3+ in In:BaZrO3 is investigated with EXAFS for samples having 0 to 75% In3+ content. It is found that indium can be inserted in any ratio in the host matrix oxide and that the oxygen coordination shell displays an In-O distance very similar to the Zr-O length. In the Zr-rich compositions, there is a preferred dopant-vacancy association that, however, does not give rise to dopant-proton interaction in the hydrated samples. The tendency of Ba2+ to be attracted toward the dopant site is attributed to the electrostatic interaction with the dopant and to the structural rearrangement around the In3+ site. Third cumulant analysis at high temperatures (up to…

Beeswax/halloysite microparticles embedded within a geopolymeric layer for the protective coating of steel

2023

A halloysite-based geopolymer filled with microwax particles was designed as a protective layer on steel substrates. Beeswax microparticles were obtained from the clay stabilized Pickering emulsions and they were homogeneously dispersed within the geopolymeric network, thus improving the coating physico-chemical properties. Specifically, this treatment changed the steel's wettability by increasing its hydrophobicity. Moreover, XRF analysis was conducted in order to have details on the chemical compositions.

The Pyridyl Functional Groups Guide the Formation of Pd Nanoparticles Inside A Porous Poly(4-Vinyl-Pyridine)

2015

The reactivity of palladium acetate inside a poly(4-vinylpyridine-co-divinylbenzene) polymer is strongly influenced by the establishment of interaction between the Pd precursor and the pyridyl functional group in the polymer. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and simultaneous X-ray absorption near edge structure (XANES) and small angle X-ray scattering (SAXS) techniques have been applied to monitor the reactivity of palladium acetate in the presence of H-2 and CO as a function of temperature. H-2 reduces palladium acetate to Pd nanoparticles and acetic acid. The pyridyl groups in the polymer play a vital role both in stabilizing the formed acetic acid, thu…

Effects of Grain Boundary Decoration on the Electrical Conduction of Nanocrystalline CeO2

2012

In this study, we investigate the effect of decorating the grain boundaries of nanocrystalline undoped ceria on the electrical transport properties. For the decoration, different acceptors (Yb, Y, Bi) were chosen. On decoration, the conduction switches from electronic to ionic. Upon sintering the grains are characterized by a core-shell configuration, in which the core remains undoped while the shell is heavily doped as a consequence of the diffusion of the acceptors toward the grain interior. The shell dominates the overall transport properties of the nanocrystalline ceria and is found to be in the mesoscopic regime.

Salphen metal complexes as potential anticancer agents: interaction profile and selectivity studies toward the three G-quadruplex units in the KIT pr…

2022

DNA G-rich sequences can organize in four-stranded structures called G-quadruplexes (G4s). These motifs are enriched in significant sites within the human genomes, including telomeres and promoters of cancer related genes. For instance, KIT proto-oncogene promoter, associated with diverse cancers, contains three adjacent G4 units, namely Kit2, SP, and Kitt. Aiming at finding new and selective G-quadruplex binders, we have synthesized and characterized five non-charged metal complexes of Pt(II), Pd(II), Ni(II), Cu(II) and Zn(II) of a chlorine substituted Salphen ligand. The crystal structure of the Pt(II) and Pd(II) complexes was determined by XRPD. FRET measurements indicated that Pt(II) an…

The structural versatility of proton sponge bismuth halides

2022

Hybrid halometalates containing lead, tin, bismuth and antimony and organic cations have recently shown a bevy of interesting photophysical properties. Aiming at finding chemically stable and thermally inert species, three halobismutate species of this class, crystallized with proton sponge-derived cations (PRSH), have been isolated as microcrystalline powders by mixing 1,8-bis(dimethylamino)-naphthalene (proton sponge, or PRS) and bismuth oxide in concentrated HX acids (X ​= ​Cl, Br and I). The two isomorphous (PRSH)3Bi2X9 (X ​= ​Br, I) species, containing isolated [Bi2X9]3- anions, are triclinic at room temperature and convert upon heating into a monoclinic structure through a displacive …

Effect of the capping agents on cobalt nanoparticles

2009

The achievement of high information density and fast recording rate in memory devices crucially depends on the structure of magnetic domains. In this paper cobalt nanoparticles are synthesised using two capping agents (TOA, ODA) and two different preparation routes: thermal decomposition (TD) and Solvated Metal Atom Dispersion (SMAD). The interaction of capping agents with free metal clusters and their influence on Co nanoparticles size, atomic structure and oxidation state is investigated by means of X-ray diffraction and X-ray absorption spectroscopy.

Crystal Structure and Local Dynamics in Tetrahedral Proton-Conducting La1-xBa1+xGaO4

2010

La1-xBa1+xGaO4-0 (LBG) compounds, based on unconnected GaO4 moieties, were recently proposed as proton conductors. Protonic defects in the lattice are inserted through self-doping with Ba2+, to create oxygen vacancies subsequently filled by hydroxyl ions. We present a combined structural analysis on self-doped LBG using X-ray diffraction (XRD) and X-ray absorption (EXAFS): these results unravel the finer structural details on the short-range and long-range scales, and they are correlated with the dynamical properties of protonic conduction coming from vibrational spectroscopy. The structure of the GaO4 groups is independent of the oxide composition. On hydration, an array of short intertetr…

Theoretical insights into inorganic-organic intercalation products of the layered perovskite HLaNb2O7: perspectives for hybrid proton conductors

2019

The modification of metal oxide surfaces with organic moieties has been widely studied as a method of preparing organic-inorganic hybrid materials for various applications. Among the inorganic oxides, ion-exchangeable layered perovskites are particularly interesting, because of their appealing electronic and reactive properties. In particular, their protonated interlayer surface can be easily functionalized with organic groups allowing the production of stable hybrid materials. As a further step in the design of new inorganic-organic hybrid proton conductors, a combined experimental and theoretical study of two intercalated compounds (propanol and imidazole) in HLaNb2O7 is presented here. A…

Synchrotron Radiation and Chemistry: Studies of Materials for Renewable Energy Sources

2014

We present an overview of selected applications of synchrotron radiation methods to topical chemical research. The analysis is limited to the studies on materials for renewable energy sources, focussing on topics peculiar to chemical research, such as reactivity and synthesis routes; in particular, the paper takes into account subjects having some relevance for the production and storage of energy based on hydrogen. Hydrogen production and storage are taken into account in the sections concerning: (i) Dye-sensitized solar cells, (ii) Metal-organic frameworks and (iii) Hydrides for hydrogen storage; production of energy by fuel cell devices is treated in (iv) Oxide ion and proton conductors …

Ultralow thermal conductivity in 1D and 2D imidazolium-based lead halide perovskites

2021

Low-dimensional hybrid organic–inorganic metal halide perovskites are rapidly emerging as a fascinating sub-class of the three-dimensional parent structures, thanks to their appealing charge and thermal transport properties, paired to better chemical and thermal stabilities. Extensive investigations of the thermal behavior in these systems are of paramount relevance to understand their optoelectronic and thermoelectric applications. Herein, we present a complete thermophysical characterization of imidazolium lead iodide, (IMI)PbI3, a 1D pseudo-perovskite with chains of face-sharing octahedra, and histammonium lead iodide, (HIST)PbI4, a 2D layered perovskite with corner-sharing octahedra. Up…

Hydrocarbons removal from synthetic bilge water by adsorption onto biochars of dead Posidonia oceanica.

2022

AbstractBilge waters are wastewaters produced on boats during navigation and usually contain hydrocarbons and oils. They cannot be directly released into the sea if not below a hydrocarbons concentration limit set by current legislation. Appropriate oil in water separator (OWS) systems can be installed on board boats to remove hydrocarbons from bilge water allowing their spillage into the sea. These systems may contain an adsorption step on a suitable adsorbent. Here, biochars produced from pyrolysis of dead Posidonia oceanica, pristine or chemically activated, have been tested as hydrocarbons adsorbents. Adsorption experiments with aqueous dispersions simulating bilge waters containing a m…

Morphology and local organization of water-containing (1R,2S)-Dodecyl(2-hydroxy-1-methyl-2-phenylethyl)dimethylammonium bromide reverse micelles disp…

2014

The structure of (1R,2S)-dodecyl(2-hydroxy-1-methyl-2-phenylethyl)dimethylammonium bromide (DMEB) reverse micelles, at various water-to-surfactant molar ratio (R-w, R-w = [water]/[DMEB]) and DMEB concentrations, has been investigated by small angle X-ray scattering (SAXS) and extended X-ray absorption fine structure spectroscopy (EXAFS). SAXS data of dry reverse micelles are consistent with a model of spherical hydrophilic core surrounded by DMEB alkyl chains whose polydispersity decreases significantly with surfactant concentration. By adding water, a sphere to cylinder transition occurs leading to a one-dimensional growth of reverse micellar cores with R-w and surfactant concentration. Th…

Formation and Growth of Pd Nanoparticles Inside a Highly Cross-Linked Polystyrene Support: Role of the Reducing Agent

2014

Simultaneous time-resolved SAXS and XANES techniques were employed to follow in situ the formation of Pd nanoparticles in a porous polystyrene support, using palladium acetate as a precursor and gaseous H2 or CO as reducing agents. These results, in conjunction with data obtained by diffuse reflectance UV–vis and DRIFT spectroscopy and TEM measurements, allowed unraveling of the different roles played by gaseous H2 and CO in the formation of the Pd nanoparticles. In particular, it was found that the reducing agent affects (i) the reduction rate (which is faster in the presence of CO) and (ii) the properties of the hosted nanoparticles, in terms of size (bigger with CO), morphology (spherica…

Solid–Solid Interfaces in Protonic Ceramic Devices: A Critical Review

2020

The literature concerning protonic ceramic devices is critically reviewed focusing the reader's attention on the structure, composition, and phenomena taking place at solid-solid interfaces. These interfaces play a crucial role in the overall device performance, and the relevance of understanding the phenomena taking place at the interfaces for the further improvement of electrochemical protonic ceramic devices is therefore stressed. The grain boundaries and heterostructures in electrolytic membranes, the electrode-electrolyte contacts, and the interfaces within composite anode and cathode materials are all considered, with specific concern to advanced techniques of characterization and to …

Defect interaction and local structural distortions in Mg-doped LaGaO3: A combined experimental and theoretical study

2017

A combined experimental and theoretical study of Mg-doped LaGaO3 electrolyte was carried out, with the aim to unveil the interaction between oxygen vacancy (Vo) and perovskite B site cations. LaGaO3 (LG) and LaGa0.875Mg0.125O2.938 (LGM0125) samples were comprehensively characterized by X-ray absorption spectroscopy (XAS) and X-ray diffraction, in order to investigate short- and long-range structures of both undoped and Mg-doped materials. XAS analysis evidenced a preferential Ga-Vo interaction in LGM0125, confirmed by periodic hybrid density functional theory calculations, which were combined with a symmetry-independent classes (SICs) approach in order to (a) obtain a detailed picture of th…

Supramolecular Eutecto Gels: Fully Natural Soft Materials

2018

The obtainment of materials featured by high environmental compatibility is one of the main goals of modern research. On this subject, we herein report the first example of supramolecular gel in deep eutectic solvents. In particular, we prepared gels of the L-amino acids isoleucine and tryptophan in choline chloride/phenylacetic acid 1:2. All gel components are readily available and nontoxic. Gels have been fully characterized by standard gelation tests, rheology, X-ray diffraction, morphology and gelation kinetics. Data collected show that gels properties depend on the gelator nature. In particular, gel phases exhibit strong colloidal forces and, this high mechanical resistance, together w…

Nickel(II), copper(II) and zinc(II) metallo-intercalators: structural details of the DNA-binding by a combined experimental and computational investi…

2014

We present a thorough characterization of the interaction of novel nickel(II) (1), copper(II) (2) and zinc(II) (3) Schiff base complexes with native calf thymus DNA (ct-DNA), in buffered aqueous solution at pH 7.5. UV-vis absorption, circular dichroism (CD) and viscometry titrations provided clear evidence of the intercalative mechanism of the three square-planar metal complexes, allowing us to determine the intrinsic DNA-binding constants (K(b)), equal to 1.3 × 10(7), 2.9 × 10(6), and 6.2 × 10(5) M(-1) for 1, 2 and 3, respectively. Preferential affinity, of one order of magnitude, toward AT compared to GC base pair sequences was detected by UV-vis absorption titrations of 1 with [poly(dG-d…

Metal-support interaction and redox behavior of Pt(1 wt %)/Ce0.6Zr0.4O2

2006

The catalyst Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is studied by CO-temperature programmed reduction (CO-TPR), isothermal oxygen storage complete capacity (OSCC), X-ray absorption spectroscopy (XAS) at the Pt L(III) edge, and in situ X-ray diffraction (in situ XRD), with the aim of elucidating the role of supported metal in CO oxidation by ceria-based three-way catalysts (TWC). The redox behavior of Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is compared to that of bare ceria-zirconia. OSCC of redox-aged Pt/ceria-zirconia is twice that of bare ceria-zirconia, and the maximum of CO consumption occurs at a temperature about 300 K lower than redox-aged ceria-zirconia. XAS analysis allows one to evidence the formati…

Characterisation of scheelite LaW0.16Nb0.84O4.08 ion conductor by combined synchrotron techniques: Structure, W oxidation state and interdiffusion

2021

Abstract Scheelite-type materials such as LaNbO4 are increasingly attracting attention as a possible alternative to the most common fluorite and perovskite structure as ion conductors. However, they are much less used and investigated. The introduction of tungsten in lanthanum orthoniobate leads to conduction properties that are compatible with oxygen ion conductivity. In this paper, we studied the effect of the introduction of tungsten in the LaNbO4 structure. High resolution X-ray diffraction showed that in LaNb1-xWxO4+x/2 with x = 0.16 the monoclinic distortion is largely suppressed and the tetragonal phase is predominant at room temperature. By XANES/EXAFS we proved that tungsten is in …

Influence of metal–support interaction on the surface structure of gold nanoclusters deposited on native SiOx/Si substrates

2014

The structure of small gold nanoclusters (R ~ 2.5 nm) deposited on different silica on silicon substrates is investigated using several characterization techniques (AFM, XRD, EXAFS and GISAXS). The grain morphology and the surface roughness of the deposited gold clusters are determined by AFM. The in-plane GISAXS intensity is modelled in order to obtain information about the cluster size and the characteristic length scale of the surface roughness. AFM and GISAXS results are in excellent agreement and show that the surface morphology of the deposited clusters depends on whether defect-rich (native) or defect-free (thermal) silica is used as a substrate. Gold clusters show a strong tendency …

Structural characterization of frozen n-heptane solutions of metal-containing reverse micelles

2007

The microstructure of temperature-quenched solutions of reverse micelles formed by sodium, cobalt, ytterbium, and cobalt/ytterbium bis(2-ethylhexyl)sulfosuccinate in n-heptane has been investigated by SAXS and EXAFS. Some changes in the X-ray absorption spectra with respect to the same systems at room temperature have been observed. The analysis of the SAXS spectra leads to the hypothesis that at 77 K the closed spherical structure of reverse micelles is retained and that during the temperature quench they undergo a clustering process involving the transition from a quite random dispersion to the formation of more or less large clusters of strongly packed reverse micelles. This behavior is …

Solid-state NMR characterization of the structure and thermal stability of hybrid organic-inorganic compounds based on a HLaNb2O7 Dion-Jacobson layer…

2016

Dion-Jacobson phases, like MLaNb2O7, are an interesting class of ion-exchangeable layered perovskites possessing electronic and photocatalytic properties. Their protonated and organo-modified homologues, in particular, have already been indicated as promising catalysts. However, the structural analysis of these highly tailorable materials is still incomplete, and both the intercalation process and thermal stability of the included organic moieties are far from being completely understood. In this study, we present a thorough solid-state NMR characterization of HLaNb2O7·xH2O intercalated with different amounts of octylamine, or with decylamine. Samples were analyzed as prepared, and after th…

Conformationally rigid molecular and polymeric naphthalene-diimides containing C6H6N2 constitutional isomers

2021

Organic thin films based on naphthalenediimides (NDIs) bearing alkyl substituents have shown interesting properties for application in OLEDs, thermoelectrics, solar cells, sensors and organic electronics. However, the polymorphic versatility attributed to the flexibility of alkyl chains remains a challenging issue, with detrimental implications on the performances. Aryl analogues containing C6H6N2 constitutional isomers are herein investigated as one of the possible way-out strategies. The synthesis of molecular and polymeric species is described, starting from naphthaleneteracarboxyldianhydride with isomeric aromatic amines and hydrazine. The materials are fully characterized by spectrosco…

Combined small-angle x-ray scattering/extended x-ray absorption fine structure study of coated Co nanoclusters in bis(2-ethylhexyl)sulfosuccinate

2009

Chemically stable cobalt nanostructures have been prepared with Co(II) reduction in the confined space of cobalt bis(2-ethylhexyl)sulfosuccinate, Co(AOT)2, reverse micelles dispersed in n-heptane. The reaction was carried out by adding a solution of sodium borohydride in ethanol (1% weight) to a 0.2M micellar solution of Co(AOT)2 in n-heptane at a reductant to Co(II) molar ratio of 4. This procedure involves the rapid formation of surfactant-coated Co nanoparticles followed by their slow separation as nanostructures embedded in a sodium bis(2-ethylhexyl)sulfosuccinate matrix. The resulting composites, characterized by extended x-ray absorption fine structure and small-angle x-ray scattering…

Local Environment of Yttrium in Y-Doped Barium Cerate Compounds

2006

The local structure of yttrium in Y-doped BaCeO3 compounds was studied using X-ray absorption spectroscopy (XAS) at the Y K-edge. Data analysis shows that the local environment of Y3+ changes, resulting in a distorted octahedron. The structural distortion found does not depend on the dopant amount at the investigated compositions, but on the level of hydration, as clearly demonstrated by the distortion increase in the BaCe0.9Y0.1O3-ä sample after the treatment in O2/H2O. In situ measurements performed in O2/H2O flux, which show that the distortion is retained at 753 K, are also reported. The observed significative structural changes seem to point out a preferential insertion of the hydroxyl…

Effects of heat treatments on the properties of copper phthalocyanine films deposited by glow-discharge-induced sublimation

2006

Copper phthalocyanine films have been deposited by glow-discharge-induced sublimation. The films have undergone postdeposition heat treatments in air at 250 and 290 °C for different times, ranging from 30 min to 14 h. The properties of as-deposited and heated films have been investigated by different techniques in order to determine the effects of heat treatments on the film properties. Fourier transform infrared analysis and UV−visible optical absorption analysis point out a gradual evolution of the film structure from a mixture of α and β polymorphs to the only β polymorph in the sample heated at 290 °C for 14 h. A pronounced decrease of carbon and nitrogen atomic percentages against an o…

Structural analysis, phase stability and electrochemical characterization of Nb doped BaCe0.9Y0.1O3−x electrolyte for IT-SOFCs

2012

Abstract To improve the chemical stability of high temperature proton conductors based on barium cerate, electrolyte powders doped with different amounts of niobium were synthesized by the citrate–nitrate auto-combustion method. Pure single phases of BaCe 0.9− x Nb x Y 0.1 O 3− x (BCYN, 0.03 ≤  x  ≤ 0.12) were obtained by thermal treatment at 1000 °C. Sintering at 1450 °C for 10 h produced dense pellets. X-ray absorption spectroscopy allowed to define the dopant ion insertion site and the co-dopant valency. Treatments in pure CO 2 atmosphere at 700 °C for 3 h and subsequent XRD analysis were carried out to probe the chemical stability of the produced electrolytes. The influence of the prese…

Ionic liquids gels: Soft materials for environmental remediation

2017

Abstract Hypothesis Nanostructured sorbents and, in particular, supramolecular gels are emerging as efficient materials for the removal of toxic contaminants from water, like industrial dyes. It is also known that ionic liquids can dissolve significant amounts of dyes. Consequently, supramolecular ionic liquids gels could be highly efficient sorbents for dyes removal. This would also contribute to overcome the drawbacks associated with dye removal by liquid–liquid extraction with neat ionic liquids which would require large volumes of extractant and a more difficult separation of the phases. Experiments Herein we employed novel supramolecular ionic liquid gels based on diimidazolium salts b…

Cation Diffusion and Segregation at the Interface between Samarium-Doped Ceria and LSCF or LSFCu Cathodes Investigated with X-ray Microspectroscopy

2017

The chemical compatibility between electrolytes and electrodes is an extremely important aspect governing the overall impedance of solid-oxide cells. Because these devices work at elevated temperatures, they are especially prone to cation interdiffusion between the cell components, possibly resulting in secondary insulating phases. In this work, we applied X-ray microspectroscopy to study the interface between a samarium-doped ceria (SDC) electrolyte and lanthanum ferrite cathodes (La0.4Sr0.6Fe0.8Cu0.2O3(LSFCu); La0.9Sr0.1Fe0.85Co0.15O3(LSCF)), at a submicrometric level. This technique allows to combine the information about the diffusion profiles of cations on the scale of several micromet…

Pd nanoparticles formation inside porous polymeric scaffolds followed by in situ XANES/SAXS

2015

International audience; Simultaneous time-resolved SAXS and XANES techniques were employed to follow in situ the formation of Pd nanoparticles from palladium acetate precursor in two porous polymeric supports: polystyrene (PS) and poly(4-vinyl-pyridine) (P4VP). In this study we have investigated the effect of the use of different reducing agents (H-2 and CO) from the gas phase. These results, in conjunction with data obtained by diffuse reflectance IR (DRIFT) spectroscopy and TEM measurements, allowed us to unravel the different roles played by gaseous H-2 and CO in the formation of the Pd nanoparticles for both PS and P4VP hosting scaffolds

The fate of silver ions in the photochemical synthesis of gold nanorods: an Extended X-ray Absorption Fine Structure analysis

2009

Water-soluble gold nanorods (Au NRs) were synthesized using a silver-ion mediated photochemical route under UV irradiation. Extended X-ray Absorption Fine Structure (EXAFS) measurements on the Ag K-edge were performed on samples obtained at different Ag/Au ratios and at increasing irradiation times in order to investigate the fate of silver ions during the growth of Au NRs. EXAFS measurements allowed to probe the chemical state and the local environment of silver in the final product. Experimental data suggest that Ag atoms are placed on top of the Au particles as metallic Ag(0), while no significant contribution to the EXAFS spectra comes from AgBr or other Ag(+) based species. The reporte…

Structural Characterization of Surfactant-Coated Bimetallic Cobalt/Nickel Nanoclusters by XPS, EXAFS, WAXS, and SAXS

2011

Cobalt nickel bimetallic nanoparticles were synthesized by changing the sequence of the chemical reduction of Co(II) and Ni(II) ions confined in the core of bis(2-ethylhexyl)phosphate (2)., and Ni(DEHP)(2). The reduction was carried out by mixing, sequentially or contemporaneously, fixed amounts of n-heptane solution of Co(DEHP)2 and Ni(DEHP)2 micelles with a solution of sodium borohydride in ethanol at a fixed (reductant)/(total metal) molar ratio. This procedure involves the rapid formation of surfactant-coated nanoparticles, indicated as Co/Ni (Co after Ni), Ni/Co (Ni after Co), and Co + Ni (simultaneous), followed by their slow separation as nanostructures embedded in a sodium bis(2-eth…

EXAFS and SAXS Investigation of Frozen Metal-Containing Reverse Micelles Dispersed in n-Heptane

2008

The role of silver in the growth of Au nanorods

2009

Indium doping of proton-conducting solid oxides

2008

Solid oxides protonic conductors are prepared by doping the pure matrix compounds with cationic species. Barium cerate and barium zirconate are perovskite-like compounds, characterized by a network of corner-sharing MeO6 octahedra (Me=Ce, Zr). Barium lies in the cavities between octahedra. Insertion of trivalent species in the octahedral site involves the formation of charge- compensating oxygen vacancies, that can be filled by hydroxyls coming from dissociative water absorption. Then, proton delocalization among structural oxygens ensures conductivity. The most effective conductors are obtained by yttrium doping that, on the other hand, enters only in limited amounts in both BaZrO3 and BaC…

Ionic conductivity of nanocrystalline heavily acceptor doped ceria: The role of the local atomic order

2014

Acceptor doped ceria (CeO2) is a material that over the years has attracted much interest for applications in solid oxide fuel cells and oxygen membranes. This study aims at systematically investigating how the local atomic order and the dopant distribution affect the ionic transport of nanocrystalline CeO2 ceramics doped with samarium, erbium and ytterbium, with concentrations ranging between 10 and 30 at.%. For this purpose, a.c. electrochemical impedance spectroscopy together with Raman and fluorescence spectroscopy as well as XRD and EXAFS analysis have been carried out. In order to have detailed information on the bulk properties of these compositions also microcrystalline samples have…

Size-controlled magnetic nanoparticles in surfactant-rich thin films: a combined EXAFS, SAXS, AFM and MFM study

2008

Photochemical Synthesis of Shape Controlled Gold Nanoparticles: A Deeper Insight on the Growth Mechanism

2007

Activated Biochar From Posidonia Oceanica. A New Adsorbent Material of Hydrocarbons from Wastewater

2019

Environmental pollution by petroleum derivatives is a very current topic. In particular, low concentration of this kind of pollutants can seriously compromise the life of animals and plants of aquatic ecosystems (Yu, 2017). The current legislation provides that bilgewater, wastewater produced by boats, can be discharged directly into the sea only if the total hydrocarbon concentration not exceds 15 mg L-1. In this work, new activated carbons were tested as adsorbent materials of oil / hydrocarbons from wastewater. Moreover, an instrumental technique able to quickly measure the required low hydrocarbons concentration is also proposed. The new activated carbons were obtained from bio-oil prod…

Local environment of yttrium in yttrium-doped barium cerate

2006

HYDROCARBONS REMOVAL FROM BILGE WATER BY ADSORPTION ONTO ACTIVATED BIOCHAR FROM POSIDONIA OCEANICA

2019

The normal operations carried out on the boats during navigation generate waste waters such as oily bilge water. The latter is the aqueous mixture of potential pollutants of different origins and types: oily fluids, lubricants and greases, cleaning fluids and other wastes that accumulate in the lower part of the vessel [1,2]. The current legislation provides that they can be discharge directly into the sea if the concentrations of some components are below the expected limits. In particular, with regard to oil / hydrocarbons contamination, the current regulatory limit is 15 mg L-1 of total hydrocarbons. The present work starts from a public/private partnership funded by a grant of the Minis…

Effects of capping agent on cobalt nanoparticles

2009

The achievement of high information density and fast recording rate in memory devices crucially depends on the structure of magnetic domains. In this paper cobalt nanoparticles are synthesised using two capping agents (TOA, ODA) and two different preparation routes: thermal decomposition (TD) and Solvated Metal Atom Dispersion (SMAD). The interaction of capping agents with free metal clusters and their influence on Co nanoparticles size, atomic structure and oxidation state is investigated by means of X-ray diffraction and X-ray absorption spectroscopy.

Silver ions mediated photochemical synthesis of water soluble gold nanoparticles with control over size and morphology

2007

Dopants and defects in proton-conducting perovskites

2008

Many doped perovskites show high proton conductivity at intermediate to high temperatures (500- 900 °C), which has opened possibilities for many prospected applications in energy conversion (fuel cells), and electrochemical devices. In a doped perovskite, e.g. BaCe1-xYxO3-y, oxygen vacancies are created by charge compensation, and can eventually react with air moisture to form structural protonic defects. The sluggish nature of the proton, which is practically invisible to most structural analyses, and poses enormous problems to quantum chemistry, has surely contributed to slow down the progress in the understanding of these materials: in fact, the conduction dynamics and its interplay with…

Dopant-matrix interaction in solid oxide electrolytes and electrodes

2013

Materials for solid oxide fuel cells (SOFC) are extensively investigated aiming at achieving better performances and device durability in view of the hopefully next implementation of hydrogen technology for the production of energy. This contribution deals with the structural aspects of the interaction of dopants with the solid matrix, either for electrodes or electrolytes. The report concerns materials that are likely fit for implementation, such as ceria-based electrolytes and mixed-oxide electrodes. However, in view of the importance of achieving a deeper insight in the mechanism of solid-state O2- conduction, results about Bi2O3 compounds are also reported. Finally, the host matrix-dopa…

Crossing the boundary between fcc and hcp: the structure of nanosized cobalt is unraveled by a model of size distribution, shape and stacking faults …

2014

The properties of nanostructured cobalt in the fields of magnetic, catalytic and biomaterials depend critically on Co close-packing. In this paper we report a structural analysis of nanosized cobalt based on the whole XRD pattern simulation allowed by the Debye equation. The underlying structural model involves statistical sequences of cobalt layers and produces simulated XRD powder patterns bearing the concurrent signatures of hexagonal and cubic close packing. Size distribution, shape and distance distribution between pairs of atoms are also modelled. The simulation algorithm allows straightforward fitting to experimental data and hence the assessment of the model parameters. Analysis of …

Mesoscopic self-organisation of magnetic Cobalt-based nanofibers and nanoclusters in surfactant matrix

2008

A New Procedure for the Lightning Experiment: Mn2O7 and Ethanol

2010

Formation of Mn2O7 and its reaction with ethanol is commonly referred to as “underwater lightnings”. Classic procedures are reviewed, along with their weak points, and physical and chemical properties of dimanganese heptaoxide are shown. A new improved approach is finally presented, safer and easier, and suited for lecturehall activities.

Functionalization of a layered oxide with organic moieties: towards hybrid proton conductors

2014

The design of innovative proton conductors for intermediate-temperature fuel cells, closing the gap between PEMFC and SOFC, is a forefront research theme in materials chemistry. [1] Layered perovskites with the Dion-Jacobson structure (ALaNb2O7) have bidimensional lanthanum niobate sheets, separated by a layer of A+ cations. These can be substituted by a variety of molecules with soft chemistry, to yield inorganic-organic hybrids. In particular, the intercalation of amines, alcohols, carboxylic or phosphonic acids, and their covalent binding to the sheets has been demonstrated recently. [2-4]We present preliminary results on the intercalation and covalent bonding of different organic molecu…

Toward a new hybrid proton conductor: lanthanum niobate layered perovskites as a source of tailorable surfaces

2014

The modification of metal oxide surfaces with organic moieties has been widely studied as a method of preparing organic-inorganic hybrid materials for various applications. Among inorganic oxides, the ion-exchangeable layered perovskites [1], materials composed by perovskite-like slabs and intercalated cations, stimulated authors’ interest in reason of some encouraging electronic and reactive properties. In particular it is well known that the interlayer surface of such materials in their protonated form can be easily functionalized with organic groups (such as alcohols [2-3] or organophosphonic acids [4]) thus allowing the production of stable hybrid materials with new electronic and react…

A real-space approach to the analysis of stacking faults in close-packed metals: Modelling and Q-space feedback Longo Alessandro

2020

An R-space approach to the simulation and fitting of a structural model to the experimental pair distribution function is described, to investigate the structural disorder (distance distribution and stacking faults) in close-packed metals. This is carried out by transferring the Debye function analysis into R space and simulating the low-angle and high-angle truncation for the evaluation of the relevant Fourier transform. The strengths and weaknesses of the R-space approach with respect to the usual Q-space approach are discussed.

Experimental observation of Electronic Metal support interaction: investigation of Au/Ceria catalysts by HERFD–XANES

2015

In this paper we report the result of a recent experiment of high resolution XANES (HERFD-XANES) which evidenced this modification suggesting that gold clusters with very similar size can have a modified electronic structure (the empty d-Density-of-states) when they are deposited on ceria and titania oxide

The Role of the Local Atomic Order and Boundary Effects on the Electrical Transport of Ceria

2014

Heavily acceptor doped ceria is a material of great relevance for applications in solid oxide fuel cells and oxygen membranes. Depending on the operation temperature, dopant concentration and microstructure (e.g. nanocrystalline vs. microcrystalline), the ionic transport properties of ceria can be mostly hindered by (i) grain boundaries or (ii) local atomic disorder in the bulk. Here, we present a selection of examples (ranging from thin films to ceramics) of how and to which extent these effects can affect the electrical transport properties. Emphasis will be given to the case of heavily doped nanocrystalline and microcrystalline ceria doped with samarium, erbium and ytterbium (dopant conc…

In situ X-ray absorption spectroscopy: evidence of Strong Metal Support Interaction (SMSI) in Pt ceria-zirconia catalysts

2005

Dopants and defects: the local structure and dynamics of proton-conducting perovskites

2009

Synthesis and structural analysis of novel proton conductors RE1-xBa1+xGaO4-x/2 (RE = La, Nd)

2009

CCDC 2059772: Experimental Crystal Structure Determination

2022

Related Article: Vincenzo Mirco Abbinante, Gonzalo García-Espejo, Gabriele Calabrese, Silvia Milita, Luisa Barba, Diego Marini, Candida Pipitone, Francesco Giannici, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Mater.Chem.C|9|10875|doi:10.1039/d1tc00564b

CCDC 2069442: Experimental Crystal Structure Determination

2021

Related Article: Candida Pipitone, Francesco Giannici, Antonino Martorana, Gonzalo Garc��a-Espejo, Silvia Carlotto, Maurizio Casarin, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Phys.Chem.C|125|11728|doi:10.1021/acs.jpcc.1c02571

CCDC 2153969: Experimental Crystal Structure Determination

2022

Related Article: Gonzalo García-Espejo, Candida Pipitone, Francesco Giannici, Norberto Masciocchi|2022|J.Solid State Chem.|312|123165|doi:10.1016/j.jssc.2022.123165

CCDC 2012750: Experimental Crystal Structure Determination

2021

Related Article: Candida Pipitone, Francesco Giannici, Antonino Martorana, Federica Bertolotti, Gabriele Calabrese, Silvia Milita, Antonietta Guagliardi, Norberto Masciocchi|2021|CrystEngComm|23|1126|doi:10.1039/D0CE01695K

CCDC 2059771: Experimental Crystal Structure Determination

2022

Related Article: Vincenzo Mirco Abbinante, Gonzalo García-Espejo, Gabriele Calabrese, Silvia Milita, Luisa Barba, Diego Marini, Candida Pipitone, Francesco Giannici, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Mater.Chem.C|9|10875|doi:10.1039/d1tc00564b

CCDC 2153967: Experimental Crystal Structure Determination

2022

Related Article: Gonzalo García-Espejo, Candida Pipitone, Francesco Giannici, Norberto Masciocchi|2022|J.Solid State Chem.|312|123165|doi:10.1016/j.jssc.2022.123165

CCDC 2069441: Experimental Crystal Structure Determination

2021

Related Article: Candida Pipitone, Francesco Giannici, Antonino Martorana, Gonzalo Garc��a-Espejo, Silvia Carlotto, Maurizio Casarin, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Phys.Chem.C|125|11728|doi:10.1021/acs.jpcc.1c02571

CCDC 2153968: Experimental Crystal Structure Determination

2022

Related Article: Gonzalo García-Espejo, Candida Pipitone, Francesco Giannici, Norberto Masciocchi|2022|J.Solid State Chem.|312|123165|doi:10.1016/j.jssc.2022.123165

CCDC 2069440: Experimental Crystal Structure Determination

2021

Related Article: Candida Pipitone, Francesco Giannici, Antonino Martorana, Gonzalo Garc��a-Espejo, Silvia Carlotto, Maurizio Casarin, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Phys.Chem.C|125|11728|doi:10.1021/acs.jpcc.1c02571

CCDC 2069439: Experimental Crystal Structure Determination

2021

Related Article: Candida Pipitone, Francesco Giannici, Antonino Martorana, Gonzalo Garc��a-Espejo, Silvia Carlotto, Maurizio Casarin, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Phys.Chem.C|125|11728|doi:10.1021/acs.jpcc.1c02571

CCDC 2059770: Experimental Crystal Structure Determination

2022

Related Article: Vincenzo Mirco Abbinante, Gonzalo García-Espejo, Gabriele Calabrese, Silvia Milita, Luisa Barba, Diego Marini, Candida Pipitone, Francesco Giannici, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Mater.Chem.C|9|10875|doi:10.1039/d1tc00564b

CCDC 2012751: Experimental Crystal Structure Determination

2021

Related Article: Candida Pipitone, Francesco Giannici, Antonino Martorana, Federica Bertolotti, Gabriele Calabrese, Silvia Milita, Antonietta Guagliardi, Norberto Masciocchi|2021|CrystEngComm|23|1126|doi:10.1039/D0CE01695K

CCDC 2012752: Experimental Crystal Structure Determination

2021

Related Article: Candida Pipitone, Francesco Giannici, Antonino Martorana, Federica Bertolotti, Gabriele Calabrese, Silvia Milita, Antonietta Guagliardi, Norberto Masciocchi|2021|CrystEngComm|23|1126|doi:10.1039/D0CE01695K

CCDC 2059769: Experimental Crystal Structure Determination

2022

Related Article: Vincenzo Mirco Abbinante, Gonzalo García-Espejo, Gabriele Calabrese, Silvia Milita, Luisa Barba, Diego Marini, Candida Pipitone, Francesco Giannici, Antonietta Guagliardi, Norberto Masciocchi|2021|J.Mater.Chem.C|9|10875|doi:10.1039/d1tc00564b