Laser-Ablation-Induced Synthesis of SiO2-Capped Noble Metal Nanoparticles in a Single Step
Here we describe a simple, powerful technique based on the laser ablation of a target immersed in a water solution of a metal salt. With this method, nanoparticles of different metals and alloys can be processed very quickly. Both the target and the salt solution can be chosen to produce metal nanoparticles of different sizes, surface-oxidized nanoparticles (silica-silver, for example), or even more complex structures to be defined by the researcher on one or more steps because the technique combines the advantages of both physical and chemical methods. We have applied this technique to the fabrication of inert silica-metal (silver, gold, and silver-gold) nanoparticles with a strong surface…
Laser ablation of a silicon target in chloroform: formation of multilayer graphite nanostructures
With the use of high-resolution transmission electron microscopy, selected area electron diffraction and x-ray photoelectron spectroscopy methods of analysis we show that the laser ablation of a Si target in chloroform (CHCl3) by nanosecond UV pulses (40 ns, 355 nm) results in the formation of about 50–80 nm core–shell nanoparticles with a polycrystalline core composed of small (5–10 nm) Si and SiC mono-crystallites, the core being coated by several layers of carbon with the structure of graphite (the shell). In addition, free carbon multilayer nanostructures (carbon nano-onions) are also found in the suspension. On the basis of a comparison with similar laser ablation experiments implement…
Production of nanometer-size GaAs nanocristals by nanosecond laser ablation in liquid.
This paper reports the formation and characterization of spherical GaAs quantum dots obtained by nanosecond pulsed laser ablation in a liquid (ethanol or methanol). The produced bare GaAs nanoparticles demonstrate rather narrow size distribution which depends on the applied laser power density (from 4.25 to 13.9 J/cm 2 in our experiments) and is as low as 2.5 nm for the highest power used. The absolute value of the average diameter also decreases significantly, from 13.7 to 8.7 nm, as the laser power increases in this interval. Due to the narrow nanoparticle size dispersion achieved at the highest laser powers two absorption band edges are clearly distinguishable at about 1.72 and 3.15 eV w…
A novel method of nanocrystal fabrication based on laser ablation in liquid environment
Abstract Metal nanoparticles can be prepared by a novel technique that consists of the laser ablation of a solid target immersed in a water solution of a metal salt. Silicon was chosen as the most adequate target to synthesize silver and gold nanoparticles from a water solution of either AgNO3 or HAuCl4. The influence of both the silver nitrate concentrations and the irradiation time of the Si target on the optical properties of the Au and Ag nanoparticles have been investigated. The crystalline nature of the metal nanoparticles has been determined by X-ray diffraction (XRD). Average size and particle size distribution have been measured by means of TEM. The absorbance spectra show the char…
Scalable heterogeneous synthesis of metallic nanoparticles and aggregates with polyvinyl alcohol
Here we report on a new route to synthesize colloidal silver and gold nanoparticles, potentially scalable for massive nanoparticle-production. This method is based on the microwave-assisted heterogeneous reduction of the metal salts with polyvinylalcohol. The reaction is carried out in alcohols, which are non-solvents for polyvinylalcohol. Nanoparticles can be very easily separated by filtration. The reaction kinetics are extremely fast. Size-controlled formation of nanoparticle agglomerates is accomplished with a seed-mediated synthesis of nanoparticles upon MW exposure.
Switchable Bactericidal Effects from Novel Silica-Coated Silver Nanoparticles Mediated by Light Irradiation
Here we report on the triggering of antibacterial activity by a new type of silver nanoparticle coated with porous silica, Ag@silica, irradiated at their surface plasmon resonant frequency. The nanoparticles are able to bind readily to the surface of bacterial cells, although this does not affect bacterial growth since the silica shell largely attenuates the intrinsic toxicity of silver. However, upon simultaneous exposure to light corresponding to the absorption band of the nanoparticles, bacterial death is enhanced selectively on the irradiated zone. Because of the low power density used for the treatments, we discard thermal effects as the cause of cell killing. Instead, we propose that …
Molecular-mediated assembly of silver nanoparticles with controlled interparticle spacing and chain length
In the present work, we report on a one-pot method for the assembly of noble metal nanoparticles with tunable optical properties, assembly length and interparticle spacing. The synthetic colloidal route is based on the covalent binding among OH-terminated silver nanoparticles by means of dicarboxylic acids with a defined molecular length. As a result, the initially symmetric plasmon band of silver nanoparticles splits into two plasmonic modes when nanoparticles are assembled due to the strong near-field plasmon coupling. We noticed a very good correlation between the plasmon wavelength shift and the interparticle spacing that is represented by the universal scaling law of the surface plasmo…
Optical properties of different polymer thin films containing in situ synthesized Ag and Au nanoparticles
Here we report on the in situ synthesis of Ag and Au nanoparticles inside several polymer matrixes by solid-state chemical reduction of a metallic salt. Poly(ethyleneimine) (PEI), poly(hydroxyethyl methacrylate) (PHEMA), poly(vinylpyrrolidone) (PVP), novolak, poly(4-vinylphenol) (P4VP), poly(4-vinylphenol)-co-(methyl methacrylate) (P4VP-co-MMA) and poly(styrene-co-allyl alcohol) (PS-co-AA) were able to reduce Ag(I) and Au(III) to the corresponding nanoparticles during the baking process. The nanoparticle diameters of Ag and Au were found to range from 2 to 25 nm. TEM also indicated a uniform distribution of nanoparticles embedded in the thin film. This approach is suitable for controlling t…
Silicon Nanocrystals Produced by Nanosecond Laser Ablation in an Organic Liquid
Small (3−5 nm in diameter following HRTEM images) Si nanocrystals were produced in a two-stage process including (1) nanosecond laser ablation of a Si target in an organic liquid (chloroform) that results in formation of big composite polycrystalline particles (about 20−100 nm average diameter) and (2) ultrasonic post-treatment of Si nanoparticles in the presence of HF. The post-treatment is responsible for disintegration of the composite Si particles, release of small individual nanocrystals, and reduction of their size due to HF-induced etching of Si oxide. The downshift and broadening of the ∼520 cm−1 Raman phonon band of the small Si nanocrystals with respect to the bulk Si Raman band i…