0000000000363630
AUTHOR
Saverio Guarino
showing 21 related works from this author
Surface Plasmon Resonance Optical Biosensors for Mannoproteins Detection
2007
CulnSe2/Zn(S,O,OH) junction on Mo foil by electrochemical and chemical route for photovoltaic applications
2014
Electrodeposition is a convenient technique for the development of low cost materials for photovoltaic (PV) device processing. Using a single step electrodeposition route, several groups have fabricated CIS (CuInSe) and CIGS (CuInGaSe) films [1]. One of the most important requirements for successful application of one-step electrodeposition film formation, is the ability to control composition of the deposited films and to develop polycrystalline microstructures with a low surface roughness and high sintered density. In this preliminary work, CIS films were produced by single bath electrodeposition finding the optimal conditions in order to achieve a dense film with high crystallinity and u…
PPG/ECG Multisite Combo System Based on SiPM Technology
2019
Two versions of a PPG/ECG combined system have been realized and tested. In a first version a multisite system has been equipped by integrating 3 PPG optodes and 3 ECG leads, whereas in another setup a portable version has been carried out. Both versions have been realized by equipping the optical probes with SiPM detectors. SiPM technology is expected to bring relevant advantages in PPG systems and overcome the limitations of physiological information extracted by state of the art PPG, such as poor sensitivity of detectors used for backscattered light detection and motion artifacts seriously affecting the measurements repeatability and pulse waveform stability. This contribution presents t…
Low invasive multisensor acquisition system for real-time monitoring of cardiovascular and respiratory parameters
2020
The recent advances in multiparametric monitoring of biosignals and management of big data prompt for the development of devices and techniques for the extraction of indicators with physiological relevance. In this context, we have designed and realized a portable electronic system, equipped with simple biomedical sensors, able to synchronously record multiple electrocardiographic (ECG), photoplethysmographic (PPG) and breathing signals, for carrying out a non-invasive monitoring of several cardiovascular parameters. In this work, we show the results of preliminary measurements performed following a specific physiological protocol (i.e., deep breathing with 10 s per cycle). The system allow…
Comparison on the use of PV systems in the vertical walls
2015
In this article the preliminary evaluation of the performance of a photovoltaic window is presented. The aim is to trace the behavior of next-generation systems, which favor architectonical integration. Three different systems have been taken into account: a dye sensitized solar cell (DSSC), blue and grey caved silicon panels. The systems can be placed behind a window or behind a wall of glass blocks.
A portable electronic system for non-invasive real-time acquisition of multiple physiological signals
2019
In this work, we have designed and realised a portable and compact electronic system for the synchronous acquisition of multiple physiological signals. The system employs a Texas Instruments ADS1298 front-end with 24-bit resolution for data acquisition and supports up to 8 channels and 4 kHz sampling rate. The front-end communicates via SPI with a STM32 microcontroller which pre-processes the data and sends them through USB or Bluetooth to a suitable PC application. The system has been realized for the simultaneous acquisition of electrocardiographic (ECG) and photoplethysmographic (PPG) signals, but it can also be employed for acquiring other typologies of signals, e.g. breathing or electr…
Characterization of Thin Film Cig(S,Se)2 Submodules Using Solar Simulator and Laser Beam Induced Current Techniques
2015
In this work, the electrical and optical characterization of CIG(S,Se)2 sub-modules using both a solar simulator equipment and the Laser Beam Induced Current (LBIC) technique is presented. By using the solar simulator and a proper set-up, the electrical parameters of the modules at varying irradiance and temperatures are determined. In addition, the LBIC measurements are carried out to analyze the 2D photocurrent uniformity of the modules at two different wavelengths. Dispersion values of extracted parameters can be very useful for practically tuning the modelling stage at device/module level.
PV systems in the vertical walls: A comparison of innovative structures
2016
This paper presents the performance comparison of PV windows with the purpose of tracing the behavior of next-generation systems, which could favor architectonical integration. More in detail, a dye sensitized solar cell (DSSC) and blue and grey thin film silicon panels have been analyzed. The systems can be placed behind a window or behind a wall of glass blocks. The three generation systems are then compared in terms of both efficiency and Fill Factor.
Electrical characterization of CIGSSe photovoltaic modules
2017
This work describes the electrical characterization of CIG(S,Se) 2 sub-modules in order to compare the related performances with those obtained from traditional silicon photovoltaic modules. This characterization has been performed through means of a test bench, mainly composed by a solar simulator equipment, allowing the determination of the parameters of the prototypes under test at different irradiances and temperatures.
Ostruzione polmonare ed aritmia respiratoria
2019
Il monitoraggio di pazienti tramite segnali fotopletismografici (PhotoPlethysmoGram, PPG) acquisiti sul polso, arteria radiale, piuttosto che sulla punta dell’indice, permette di ottenere un segnale più stabile e con maggiori informazioni, come la gittata cardiaca, la durata della contrazione ventricolare e la chiusura dell’aorta. In questo lavoro è presentata un’attività preliminare per rilevare condizioni come l’ostruzione polmonare e le apnee notturne. Si è indagato l’andamento dell’aritmia respiratoria in relazione ad eventuali difficoltà respiratorie. Per il momento ci si è limitati ad osservare soggetti sani e l’ostruzione è stata simulata facendo respirare i soggetti attraverso una c…
A portable system for multiple parameters monitoring: towards assessment of health conditions and stress level in the automotive field
2019
In this work, an electronic portable combo system able to synchronously acquire multiple signals, e.g. electrocardiographic (ECG), photoplethysmographic (PPG) and breathing waveforms, is presented. The realized system is also capable of showing in real time some physiological parameters which can be used for assessing health/stress status of the volunteer, such as heart rate and breathing frequency and their trends over time. Thanks to the use of non-invasive PPG probes, of batteries as power supply, and to the possibility to add in the future additional sensors to acquire other signals, the system could also be employed inside vehicles for assessing the status of the driver. Finally, the r…
Physiological parameters measurements in a cardiac cycle via a combo PPG-ECG system
2015
In this paper, we present an innovative way to measure some physiological parameters (such as the pre-ejection period, the pulse transit time, the blood pressure) in a cardiac cycle. A combo PPG-ECG system has been developed and employed to extract both the ECG signal from standard limb leads and simultaneously the photoplethysmography signal from the wrist and the forearm, to calculate the pre-ejection period. This system represents an easy and non-invasive technique to determine these biomedical parameters without using expensive impedance cardiography equipment.
Integrated optic Surface Plasmon Resonance Measurements in Glass substrates
2007
The surface plasmon resonance (SPR) technique is an optical method that can be used to measure the refractive index of organic nano-layers adsorbed on a thin metal film. Although there are many techniques for measuring biomolecular interactions, SPR-based techniques play a central role in many current biosensing experiments, since they are most suited to sensitive and quantitative kinetic measurements. Here we give some results from the analysis and numerical elaboration of SPR data regarding the flow of different solutions with refractive indexes in the range of interest (1-1.4). After a brief discussion of the principles of SPR and of waveguide fabrication technique, we give a description…
MATCHING THIN LAYER FOR SURFACE PLASMON RESONANCE TUNING ON LITHIUM NIOBATE WAVEGUIDES
2006
Surface Plasmon Resonance Measurement of Neutravidin Layer on Gold Thin Film
2006
Characterization of thin film CIG(S,SE)2 submodules using solar simulator and laser beam induced current techniques (Versione estesa)
2015
In this work, the electrical and optical characterization of CIG(S, Se)2 sub-modules using both a solar simulator equipment and the Laser Beam Induced Current (LBIC) technique is presented. By using the solar simulator and a proper set-up, the electrical parameters of the modules at varying irradiance and temperatures are determined. In addition, the LBIC measurements are carried out to analyze the 2D photocurrent uniformity of the modules at two different wavelengths. Dispersion values of extracted parameters can be very useful for practically tuning the modelling stage at device/module level.
Progettazione e realizzazione di biosensori a risonanza plasmonica superficiale in ottica integrata.
2007
Cardiovascular parameters detection using a Photoplethismographic system
2016
We propose an innovative, cost-effective and easy to employ photoplethysmographic (PPG) system using Silicon Photomultipliers (SiPMs) sensors to measure cardiovascular parameters that can potentially represent markers for arterial stiffness
Variazione della pressione sistolica e diastolica con la respirazione
2016
L’attività di ricerca in corso riguarda la possibilità di ricavare dati clinicamente significativi dai segnali ottici PPG (PhotoPletysmoGraphy). Il segnale PPG viene utilizzato per ricavare informazioni sul volume e sulla saturazione del sangue che interessa il distretto illuminato dalla luce IR (infrarosso) usata per l’analisi. Il volume di sangue contenuto nel segmento di arteria esaminato dipende dalla pressione e dal ciclo cardiaco, attraverso la rigidità dell’arteria.
CuInSe2/Zn(S,O,OH) junction by electrochemical and chemical route for photovoltaic applications (GE 2014)
2014
Electrodeposition is a convenient technique for the development of low cost materials for photovoltaic (PV) device processing. Using a single step electrodeposition route, several groups have fabricated CIS (CuInSe) and CIGS (CuInGaSe) films. One of the most important requirements for successful application of one-step electrodeposition film formation is the ability to control composition of the deposited films and to develop polycrystalline microstructures with a low surface roughness and high sintered density.