0000000000750317
AUTHOR
H. Bertelsen
The Upgrade of the ATLAS Level-1 Central Trigger Processor
The ATLAS Level-1 Central Trigger Processor (CTP) combines information from calorimeter and muon trigger processors as well as other sources and makes the final Level-1 Accept (L1A) decision. Due to the increasing luminosity of the LHC and the growing demands of physics and monitoring placed on the ATLAS Level-1 trigger system, the current CTP has reached its design limits. Therefore and in order to provide some margin for future operation, the CTP will be upgraded during the LHC shutdown of 2013/14.
A layer correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20GeV…
Search for supersymmetric particles using acoplanar charged-particle pairs from Z0 decays
We have performed a search for supersymmetric particles using acoplanar pairs of oppositely-charged particles in decays of the Z0. In 0.53 pb−1 of integrated luminosity near the Z0 peak, we observe two events where approximately four are expected from background, allowing limits to be extended on combined photino and slepton masses, and also on combined photino and chargino masses.
Combined performance studies for electrons at the 2004 ATLAS combined test-beam
In 2004 at the ATLAS (A Toroidal LHC ApparatuS) combined test beam, one slice of the ATLAS barrel detector (including an Inner Detector set-up and the Liquid Argon calorimeter) was exposed to particles from the H8 SPS beam line at CERN. It was the first occasion to test the combined electron performance of ATLAS. This paper presents results obtained for the momentum measurement p with the Inner Detector and for the performance of the electron measurement with the LAr calorimeter (energy E linearity and resolution) in the presence of a magnetic field in the Inner Detector for momenta ranging from 20 GeV/c to 100 GeV/c. Furthermore the particle identification capabilities of the Transition Ra…
The ALICE experiment at the CERN LHC
Journal of Instrumentation 3(08), S08002 (2008). doi:10.1088/1748-0221/3/08/S08002
Hardware and firmware developments for the upgrade of the ATLAS Level-1 Central Trigger Processor
The Central Trigger Processor (CTP) is the final stage of the ATLAS first level trigger system which reduces the collision rate of 40 MHz to a Level-1 event rate of 100 kHz. An upgrade of the CTP is currently underway to significantly increase the number of trigger inputs and trigger combinations, allowing additional flexibility for the trigger menu. We present the hardware and FPGA firmware of the newly designed core module (CTPCORE+) module of the CTP, as well as results from a system used for early firmware and software prototyping based on commercial FPGA evaluation boards. First test result from the CTPCORE+ module will also be shown.
Study of energy response and resolution of the ATLAS barrel calorimeter to hadrons of energies from 20 to 350 GeV
A fully instrumented slice of the ATLAS detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the results of the measurements of the response of the barrel calorimeter to hadrons with energies in the range 20 to 350 GeV and beam impact points and angles corresponding to pseudorapidity values in the range 0.2-0.65 are reported. The results are compared to the predictions of a simulation program using the Geant 4 toolkit.
Photon reconstruction in the ATLAS Inner Detector and Liquid Argon Barrel Calorimeter at the 2004 Combined Test Beam
The reconstruction of photons in the ATLAS detector is studied with data taken during the 2004 Combined Test Beam, where a full slice of the ATLAS detector was exposed to beams of particles of known energy at the CERN SPS. The results presented show significant differences in the longitudinal development of the electromagnetic shower between converted and unconverted photons as well as in the total measured energy. The potential to use the reconstructed converted photons as a means to precisely map the material of the tracker in front of the electromagnetic calorimeter is also considered. All results obtained are compared with a detailed Monte-Carlo simulation of the test-beam setup which i…
An upgraded ATLAS Central Trigger for post-2014 LHC luminosities
In early 2012, the Large Hadron Collider (LHC) reached instantaneous luminosities of 6.7·1033 cm−2s−1 and produced events with up to 40 interactions per colliding proton bunch. This places stringent operational and physical requirements on the ATLAS trigger in order to reduce the collision rate of up to 40 MHz when operating with design parameters to a manageable event storage rate of about 400 Hz without discarding those events considered interesting. The Level-1 trigger is the first rate-reducing step in the ATLAS trigger and primarily composed of the Calorimeter Trigger, Muon Trigger, and the Central Trigger Processor which are implemented in custom built VME electronics. The Central Tri…
Study of the response of the ATLAS central calorimeter to pions of energies from 3 to 9 GeV
Çetin, Serkant Ali (Dogus Author) A fully instrumented slice of the ATLAS central detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the response of the central calorimeters to pions with energies in the range between 3 and 9 GeV is presented. The linearity and the resolution of the combined calorimetry (electromagnetic and hadronic calorimeters) was measured and compared to the prediction of a detector simulation program using the toolkit Geant 4.
ALEPH: a Detector for Electron-Positron Annihilations at LEP
Process-centred Software Engineering Environments (PSEE) are the most recent generation of environments supporting software development activities. Most of PSEE are based on mechanisms promoting enforcement and automation of process activities. In this kind of mechanisms the process models are prescribed in a detailed and complete way. But the experience shows that supporting processes is more concerned with the flexibility of guidance offered during the process performance than with enforcement of a collection of predefined process models. In this paper, we present a solution to support strategic processes in a PSEE by providing a flexible guidance during process enactment.