Determination of volatiles and sensory profile in grape juices from Gamay

Utilisation d'un polymère à Empreintes Moléculaires pour piéger l'iprodione en milieu aqueux

Experimental design approach in the synthesis of molecularly imprinted polymers specific for iprodione fungicide

International audience; An experimental design (ED) approach was applied to study the weight of three factors in the synthesis of a molecularly imprinted polymer (MIP) specific for iprodione fungicide. The objective was to obtain a high specific polymer with the best performance of iprodione binding. Thirteen iprodione-imprinted polymers and 13 non-imprinted polymers (NIP) were synthesized according to ED having 3 influencing factors: the polymerization method, the crosslinker nature and the functional monomer type. For each factor, two levels were studied: bulk and precipitation polymerization for the first factor, trimethylolpropane trimethacrylate (TRIM) and ethylene glycol dimethacrylat…

Molecularly imprinted polymer solid phase extraction of fungicides from wine samples

In order to preconcentrate iprodione fungicide in white wine samples, molecularly imprinted polymers (MIPs) specific for iprodione were synthesized using two polymerization approaches: precipitation (MIPp) and bulk polymerization (MIPb). A comparison of the performance of the MIPs and the corresponding non-imprinted polymers (NIPs) was conducted in batch studies. In this case, the MIPp revealed better recognition properties toward iprodione in wine samples than the MIPb. The MIPp and MIPb were then used as sorbents on solid phase extraction cartridges (MISPEp and MISPEb consecutively) in order to pre-concentrate iprodione from white wine samples. The optimization of the MISPE elution step w…

Sorption kinetic of aroma compounds by edible bio-based films from marine-by product macromolecules: Effect of relative humidity conditions

International audience; Edible films based on gelatin and chitosan have high gas and aroma barrier properties. This study focused on their capability to sorbed/retain aroma compounds (1-hexanal, 2-hexen-1-ol, 1-hexanol, 3-hexanone and phenol) at three relative humidity level (≤2%, 53% or 84% RH). Whatever the relative humidity condition, the order of sorption is keton (3-hexanone) < aldehyde (1-hexanal) < aliphatic alcohols (2-hexen-1-ol and 1-hexanol) < phenol. This order could be related to the intrinsic chemical properties of aroma compounds. The increase in moisture enhanced the sorption at the highest RH for all the aroma compounds. However, a competition between water and aliphatic al…

Iron intake among Lebanese women: sociodemographic factors, iron-rich dietary patterns, and preparation of hummus, a Mediterranean dish

Background: Plant-based foods such as hummus are alternative to animal protein, and when properly pre-pared, they help to alleviate nutritional iron deficiency that leads to anemia, a global health problem. Objective: The objective was to assess iron intake among Lebanese women and related participant’s charac-teristics, discern iron-rich dietary patterns, evaluate their association with nutrients intake and participant’s sociodemographic characteristics, and identify the women preparing hummus traditionally and properly for an enhanced iron bioavailability. Design: A cross-sectional study of 400 Lebanese women (18–74 years old) was conducted in Lebanon. Data from a questionnaire, including…

Fast and direct analysis of oxidation levels of oil-in-water emulsions using ATR-FTIR.

International audience; Oxidation of omega-3 fatty acids is a major limitation on its enrichment in food and beverages. An efficient and simple method to monitor lipid oxidation in complex systems is essential to limit lipid oxidation during formulation and processing. Fish oil-in-water emulsions (20% v/v) were exposed to iron or free radical initiated oxidation. Conjugated dienes (CDs) were rapidly measured using a previously developed fat extraction method. Fourier transform infrared (FTIR) spectroscopy has been used to directly record chemical changes occurring during oxidation. Variations were noticed in different spectral regions despite the presence of broad water bands near 3400 and …

Identification of Key Gin Aroma Compounds

Potential impact aroma compounds of gin have been identified using Gas Chromatogry Olfactometry Mass-Spectrometry (GC-O-MS). In order to select some of them for a recombination study, we developed a specific procedure. Instead of only choosing the compounds on criteria such as their odor quality or their odor activity values, we also used physico-chemical parameters and information on their botanical origin. Data were organized in blocks homogeneous in terms of parameter type. Different statistical treatments were used in order to classify the compounds either by analyzing the parameters altogether or separately block by block.

A New pH-Dependent Macrocyclic Rhodamine B-Based Fluorescent Probe for Copper Detection in White Wine

For efficiently measuring copper (II) ions in the acidic media of white wine, a new chemosensor based on rhodamine B coupled to a tetraazamacrocyclic ring (13aneN4CH2NH2) was designed and synthesized by a one-pot reaction using ethanol as a green solvent. The obtained chemosensor was characterized via NMR, UV and fluorescent spectra. It was marked with no color emission under neutral pH conditions, with a pink color emission under acidic conditions, and a magenta color emission under acidic conditions where copper (II) ions were present. The sensitivity towards copper (II) ions was tested and verified over Ca2+, Ag+, Zn2+, Mg2+, Co2+, Ni2+, Fe2+, Pb2+, Cd2+, Fe3+, and Mn2+, with a detection…

Water sorption isotherms of molecularly imprinted polymers. Relation between water binding and iprodione binding capacity

International audience; Molecularly imprinted polymers are often used in aqueous medium in order to recognize specifically a target molecule. The molecular recognition is usually based on hydrogen bonding. In this case, water molecule presents a serious competition towards the target molecule. In this study, the water sorption by molecularly imprinted polymers was studied in aqueous medium. The molecularly imprinted polymers were specific for iprodione fungicide and were prepared using a 24 full factorial experimental design. They were synthesized using EGDMA or TRIM as crosslinker, methacrylamide or styrene as functional monomer and using bulk or precipitation polymerization. The water sor…

The Potential Use of Raw and Deodorized Non-Conventional Protein Powder in Human Food

This study aimed to evaluate the potential use of a non-conventional protein source, a powder made from earthworms, as human food. Sensory analyses were done in order to assess the acceptability of cookies that were fortified with Eisenia foetida (Ef) protein powder. Cocoa and cinnamon were used as taste-masking agents. The acceptability of cookies fortified with deodorized Ef protein powder (off-flavor reduced) was also evaluated. We demonstrated that cocoa cookies can be fortified with 3.9% of raw Ef proteins and that cocoa/cinnamon cookies can be fortified with 5.2% of raw Ef proteins without any loss in their acceptability. Cookies fortified either with a raw protein powder or with a de…

Sensor and device for detecting an analyte in a liquid

Determination of key aroma compounds of Gin by GC-O and GC-MS

National audience

An original approach for gas chromatography-olfactometry detection frequency analysis: Application to gin

Abstract Gas Chromatography-Olfactometry (GC-O) is a technique that lies halfway between physicochemical and sensory analysis and involves the perception of volatile flavour compounds, separated by gas chromatography, by the human nose. Of the different GC-O procedures available, detection frequency has been proved to be more rapid and more repeatable, even with an untrained panel. This characteristic regarding the panel is often not considered when dealing with the sensory attributes determined by assessors. An original approach to GC-O using the detection frequency procedure has been developed and tested on two types of gin and made it possible to benefit from sensory data. The panel cons…

Extraction d'éléments traces métalliques à partir de pains libanais et évaluation du danger de ces mélanges

Parmi les éléments traces métalliques (ETM) qui peuvent être présents dans les aliments, certains sont connus comme étant toxiques et doivent faire l’objet d’une surveillance accrue. En ce qui concerne la sécurité sanitaire, il semble pertinent d’étudier le cas du pain, qui représente une part majoritaire de la ration journalière de la population libanaise. Dans une étude précédente, l’Institut de Recherche sur l’Agriculture Libanaise (IRAL) a déterminé la présence de plusieurs ETM (arsenic, cadmium, cobalt, chrome, mercure, nickel et plomb) dans le pain libanais. Bien que la toxicité de chaque ETM soit connue individuellement, il est important de tester la toxicité de ce mélange d’ETM, pré…

How Chemical and Sensorial Markers Reflect Gentian Geographic Origin in Chardonnay Wine Macerated with Gentiana lutea Roots?

A Burgundian Chardonnay wine was enriched with Gentiana lutea root powders originating from two French mountain sites (Massif Central and Jura) in order to prepare semi-dry gentian aromatized Chardonnay wine-based drinks. These novel alcoholic beverages were chemically and sensorially characterized for evaluating if the gentian geographic origin influenced bitter and elemental and volatile composition and sensory profiles in the final products. For that, the chemical fingerprint of gentian powders and wines were carried by headspace solid phase microextraction gas chromatography coupled to mass spectrometry (HS&ndash

The Importance of Developing Electrochemical Sensors Based on Molecularly Imprinted Polymers for a Rapid Detection of Antioxidants

International audience; This review aims to pin out the importance of developing a technique for rapid detection of antioxidants, based on molecular imprinting techniques. It covers three major areas that have made great progress over the years in the field of research, namely: antioxidants characterization, molecular imprinting and electrochemistry, alone or combined. It also reveals the importance of bringing these three areas together for a good evaluation of antioxidants in a simple or complex medium, based on selectivity and specificity. Although numerous studies have associated antioxidants with molecular imprinting, or antioxidants with electrochemistry, but even electrochemistry wit…

Lemon Juice, Sesame Paste, and Autoclaving Influence Iron Bioavailability of Hummus: Assessment by an In Vitro Digestion/Caco-2 Cell Model

Hummus, an iron-containing plant-based dish mainly made from chickpea pur&eacute

Substitution of carcinogenic solvent dichloromethane for the extraction of volatile compounds in a fat-free model food system

International audience; Dichloromethane is known as a very efficient solvent, but, as other halogenated solvents, is recognized as a hazardous product (CMR substance). The objective of the present work is to propose substitution solvent for the extraction of volatile compounds. The most important physico-chemical parameters in the choice of an appropriate extraction solvent of volatile compounds are reviewed. Various solvents are selected on this basis and on their hazard characteristics. The selected solvents, safer than dichloromethane, are compared using the extraction efficiency of volatile compounds from a model food product able to interact with volatile compounds. Volatile compounds …

Determination of volatiles and sensory profiles in grape juices from Gamay

International audience

L'uB au coeur de la viticulture durable

SPEIPMUB; Ancrée au cœur d’une région viticole historique, l’université de Bourgogne soutient de multiples projets de recherche viti-vinicoles et s’investit dans la formation des futurs professionnels du secteur. Elle est d’ailleurs la seule université française à disposer d’un domaine expérimental, situé à Marsannay-la-Côte. En activité depuis 1955, il apporte à la fois un support pédagogique aux étudiants de l’institut Jules Guyot, qui y effectuent différentes manipulations en conditions réelles, et répond à des demandes d’expérimentations émanant des viticulteurs et vignerons de la région. Dans ce cadre, il teste de nouveaux produits, matériaux ou micro-organismes susceptibles de mieux p…

Chapter 68 - Identification of Key Gin Aroma Compounds: An Integrative Approach Based on an Original Selection Procedure

International audience; Potential impact aroma compounds of gin have been identified using Gas Chromatogry Olfactometry Mass-Spectrometry (GC-O-MS). In order to select some of them for a recombination study, we developed a specific procedure. Instead of only choosing the compounds on criteria such as their odor quality or their odor activity values, we also used physico-chemical parameters and information on their botanical origin. Data were organized in blocks homogeneous in terms of parameter type. Different statistical treatments were used in order to classify the compounds either by analyzing the parameters altogether or separately block by block.

In situ Pesticide Detection in Food Processing by Microwave Transduction Combined with Molecularly Imprinted Polymers

International audience; Since 2005, the microwave transduction coupled with a sensitive material is devoted to gas detection. In this work, we demonstrate the possibility to detect liquid pollutant (pesticide, fungicide) for food-processing industry. The principle is based on the interaction of the pollutant with a sensitive material within a microwave structure. The sensor is submitted to an electromagnetic excitation in wideband frequencies (GHz) and presents a quantitative response to liquid pollutant expositions at low concentration. The retained sensitive material is a molecularly imprinted polymer (MIP) specific to the pesticide targeted in a model wine. The coupling with this materia…

Physico-chemical characterisation of a non-conventional food protein source from earthworms and sensory impact in arepas

International audience; This study aimed to characterise a non-conventional protein source: a powder made from earthworms, and to evaluate its potential use as human food. The way it was prepared led to low solubility and wide particle size distribution. Sensory analysis was used to assess the acceptability and the organoleptic properties of maize-based pan-cakes fortified with this novel protein powder. Satisfying products were obtained with a substitution level of 5.5% (w/w) earthworm powder in pan-cakes. GC-MS allowed the identification of more than seventy volatile compounds that may be responsible for the off-odour of the powder. The most abundant chemical groups found in the volatile …

Binding characteristics of molecularly imprinted polymers based on fungicides in hydroalcoholic media

An iprodione-imprinted polymer was prepared by copolymerization of methacrylamide and ethylene glycol dimethacrylate using a noncovalent imprinting approach. Methacrylamide was chosen using molecular dynamics simulations. To concentrate iprodione from hydro-alcoholic solutions, batch sorption of iprodione on the imprinted polymer were conducted. The equilibrium time for iprodione sorption is 20 min, and the corresponding kinetic mechanism follows the pseudo-second order indicating a strong interaction between iprodione and the imprinted polymer. Langmuir, Freundlich, and Dubinin-Radushkevich models were used to fit the isotherm of iprodione sorption. The imprinted polymer was found to be mo…

Impact of lipid extraction on the dearomatisation of an Eisenia foetida protein powder

www.elsevier.com/locate/foodchem ; FSTA:2010-Sp0197; International audience; Delipidation was studied as a way to dearomatise a non-conventional protein powder obtained from Eisenia foetida earthworms. In the first step, we studied the impact of several factors such as solvent type, extraction method and particle size on the yield of extracted lipids. Lipid extraction from samples was considerably improved using an ultrasound method with a chloroform/methanol mixture and small particle size. In the second step, the volatile compounds were extracted from the delipidated protein powder by the SAFE extraction method and by the HS-SPME method, and were further analysed by GC-MS. The chloroform/…

Protein Thermal Denaturation of Beef Muscle: Neutron Imaging and spectroscopies

International audience; Open Food System is an industrial innovation project having as goal the development of “smart” domestic appliances, which can pilot cooking process of meat and fish without any human intervention. My Ph.D research belongs to that huge project with the purpose to follow the evolution of cooking process at molecular scale, describing biochemical reactions occurring among muscle constituents and associating them to macroscopic characteristics (texture, colour, …). Thermal denaturation of muscle proteins was studied by spectroscopy technics, able to observe their conformational modifications due to the application of several temperature/time conditions. Spectroscopy sign…