0000000000915287
AUTHOR
H. Jensen
Microhardness and adhesion measurements of reactively sputtered TiN/AlN multilayer coatings deposited as function of mass-flow of nitrogen
Abstract Multilayer coatings of (Ti, Al)N x have been deposited by reactive sputtering from Ti and Al targets in a side-by-side configuration on WC and stainless steel substrates. The rotation of the substrate holder varied from 2 to 14 r.p.m. corresponding to a bilayer thickness of 0.8–8 nm. The acoustic emission scratch technique for adhesion measurements was used for studying coating performance, and critical load values for the coatings on WC substrate up to 150 N were obtained. The Vickers microhardness in the load range 0.003–2 N was measured, and in order to obtain true hardness values, an optimal range of indentation depth and coating thickness was determined. Depending on the nitro…
Cross section measurements of high-p(T) dilepton final-state processes using a global fitting method
We present a new method for studying high-$p_T$ dilepton events ($e^{\pm}e^{\mp}$, $\mu^{\pm}\mu^{\mp}$, $e^{\pm}\mu^{\mp}$) and simultaneously extracting the production cross sections of $p\bar{p} \to t\bar{t}$, $p\bar{p} \to W^+W^-$, and $p\bar{p} \to \ztt$ at a center-of-mass energy of $\sqrt{s} = 1.96$ TeV. We perform a likelihood fit to the dilepton data in a parameter space defined by the missing transverse energy and the number of jets in the event. Our results, which use $360 {\rm pb^{-1}}$ of data recorded with the CDF II detector at the Fermilab Tevatron Collider, are $\sigma(t\bar{t}) = 8.5_{-2.2}^{+2.7}$ pb, $\sigma(W^+W^-) = 16.3^{+5.2}_{-4.4}$ pb, and $\sigma(\ztt) =291^{+50}_…
Technical challenges in the construction of the steady-state stellarator Wendelstein 7-X
The next step in the Wendelstein stellarator line is the large superconducting device Wendelstein 7-X, currently under construction in Greifswald, Germany. Steady-state operation is an intrinsic feature of stellarators, and one key element of the Wendelstein 7-X mission is to demonstrate steady-state operation under plasma conditions relevant for a fusion power plant. Steady-state operation of a fusion device, on the one hand, requires the implementation of special technologies, giving rise to technical challenges during the design, fabrication and assembly of such a device. On the other hand, also the physics development of steady-state operation at high plasma performance poses a challeng…
Reactive sputtering of nanostructured multilayer coatings and their tribological properties
Abstract The present study describes and reports on reactive sputtering of nanostructured multilayer coatings. A 3 μm coating for instance may contain up to a few thousand bilayers of two different film materials, and in order to achieve this, a substrate holder rotates through two different sputtering zones in an Alcatel SC 650 sputtering equipment with metal and carbon cathodes operating concurrently in the so-called side-by-side configuration. In reactive sputtering of nitrides, reactive nitrogen was controlled very accurately in order to establish controllable points on a total sputtering pressure versus nitrogen flow curve. Nanostructured multilayer coatings of the type MeN/C–N were de…
Direct measurement of the W boson width
We present a direct measurement of the width of the W boson using the shape of the transverse mass distribution of W->enu candidates selected in 1 fb-1 of data collected with the D0 detector at the Fermilab Tevatron collider in ppbar collisions at sqrt{s}=1.96 TeV. We use the same methods and data sample that were used for our recently published W boson mass measurement, except for the modeling of the recoil, which is done with a new method based on a recoil library. Our result, 2.028 +- 0.072 GeV, is in agreement with the predictions of the standard model.