0000000000922304
AUTHOR
T. Sonoda
Precision mass measurements of neutron-rich Tc, Ru, Rh, and Pd isotopes
The masses of neutron-rich $^{106\ensuremath{-}112}\mathrm{Tc}$, $^{106\ensuremath{-}115}\mathrm{Ru}$, $^{108\ensuremath{-}118}\mathrm{Rh}$, and $^{112\ensuremath{-}120}\mathrm{Pd}$ produced in proton-induced fission of uranium were determined using the JYFLTRAP double Penning trap setup. The measured isotopic chains include a number of previously unmeasured nuclei. Typical precisions on the order of 10 keV or better were achieved, representing a factor of 10 improvement over earlier data. In many cases, significant deviations from the earlier measurements were found. The obtained data set of 39 masses is compared with different mass predictions and analyzed for global trends in the nuclear…
Independent Isotopic Product Yields in 25 MeV and 50 MeV Charged Particle Induced Fission of 238U and 232Th
Abstract Independent isotopic yields for most elements from Zn to La in 25-MeV proton-induced fission of 238U and 232Th have been determined at the IGISOL facility in the University of Jyvaskyla. In addition, isotopic yields for Zn, Ga, Rb, Sr, Zr, Pd and Xe in 50-MeV proton-induced fission of 238U and for Zn, Ga, Rb, Sr, Cd and In in 25-MeV deuterium-induced fission of 238U have been measured. The utilised technique recently developed at the University of Jyvaskyla, is based on a combination of the ion guide technique and the ability of a Penning trap to unambiguously identify the isotopes by their atomic mass. Since the yields are determined by ion counting, no prior knowledge beyond the …
$Q$-value of the superallowed $\beta$ decay of 62Ga
Masses of the radioactive isotopes 62Ga, 62Zn and 62Cu have been measured at the JYFLTRAP facility with a relative precision of better than 18 ppb. A Q_EC value of (9181.07 +- 0.54) keV for the superallowed decay of 62Ga is obtained from the measured cyclotron frequency ratios of 62Ga-62Zn, 62Ga-62Ni and 62Zn-62Ni ions. The resulting Ft-value supports the validity of the conserved vector current hypothesis (CVC). The mass excess values measured were (-51986.5 +-1.0) keV for 62Ga, (-61167.9 +- 0.9) keV for 62Zn and (-62787.2 +- 0.9) keV for 62Cu.
Upgrade and yields of the IGISOL facility
The front end of the Jyvaskyla IGISOL facility was upgraded in 2003 by increasing its pumping capacity and by improving the radiation shielding. In late 2005, the skimmer electrode of the mass separator was replaced by a sextupole ion guide, which improved the mass separator efficiency up to an order of magnitude. The current design of the facility is described. The updated yield data, achieved with and without the additional JYFLTRAP purification, using both fusion evaporation reactions and particle induced fission is presented to give an overview of the capability of the facility. These data have been determined either by radioactivity measurements or by direct ion counting after the Penn…
Precise half-life measurement of the Si-26 ground state
The beta-decay half-life of 26Si was measured with a relative precision of 1.4*10e3. The measurement yields a value of 2.2283(27) s which is in good agreement with previous measurements but has a precision that is better by a factor of 4. In the same experiment, we have also measured the non-analogue branching ratios and could determine the super-allowed one with a precision similar to the previously reported measurements. The experiment was done at the Accelerator Laboratory of the University of Jyvaskyla where we used the IGISOL technique with the JYFLTRAP facility to separate pure samples of 26Si.
Applications of the total absorption technique to improve reactor decay heat calculations: study of the beta decay of [sup 102,104,105]Tc
The decay heat of the fission products plays an important role in predicting the heat‐up of nuclear fuel after reactor shutdown. This form of energy release is calculated as the sum of the energy‐weighted activities of all fission products P(t) = ΣEiλiNi(t), where Ei is the decay energy of nuclide i (gamma and beta component), λi is the decay constant of nuclide i and Ni(t) is the number of nuclide i at cooling time t. Even though the reproduction of the measured decay heat has improved in recent years, there is still a long standing discrepancy at t∼1000 s cooling time for some fuels. A possible explanation for this disagreement can been found in the work of Yoshida et al. [1], who demonst…
Half-life, branching-ratio, andQ-value measurement for the superallowed0+→0+β+emitterTi42
The half-life, the branching ratio, and the decay $Q$ value of the superallowed $\ensuremath{\beta}$ emitter $^{42}\mathrm{Ti}$ were measured in an experiment performed at the JYFLTRAP facility of the Accelerator Laboratory of the University of Jyv\"askyl\"a. $^{42}\mathrm{Ti}$ is the heaviest ${T}_{z}=\ensuremath{-}1$ nucleus for which high-precision measurements of these quantities have been tried. The half-life (${T}_{1/2}=208.14\ifmmode\pm\else\textpm\fi{}0.45$ ms) and the $Q$ value [${Q}_{\mathrm{EC}}=7016.83(25)$ keV] are close to or reach the required precision of about 0.1%. The branching ratio for the superallowed decay branch [$\mathrm{BR}=47.7(12)%$], a by-product of the half-lif…
A study of on-line gas cell processes at IGISOL
Abstract The laser ion source at the IGISOL facility, Jyvaskyla, has been used to study the effects of the passage of a primary beam through an ion guide via the dynamic time profiles of yttrium and related molecular compounds. The accessibility of a neutral fraction for laser ionization is shown to be restricted to the nozzle region in the presence of a weak plasma. The survival of this neutral fraction cannot be explained by recombination of the buffer gas alone and perhaps indicates a suppression of the transport of ions due to a plasma-generated electric field. The concept of a competition between the processes that create and destroy the ion of interest is used to explain the different…
β-decay data requirements for reactor decay heat calculations: study of the possible source of the gamma-ray discrepancy in reactor heat summation calculations
The decay heat of fission products plays an important role in predictions of the heat up of nuclear fuel in reactors. The released energy is calculated as the summation of the activities of allfission products P(t) = Ei λi Ni(t), where Ei is the decay energy of nuclide i (gamma and beta component), λi is the decay constant of nuclide i and Ni(t) is the number of nuclide i at cooling time t. Even though the reproduction of the measured decay heat has improved in recent years, there is still a long standing discrepancy in the t ∼ 1000s cooling time for some fuels. A possible explanation to this improper description has been found in the work of Yoshida et al. (1), where it has been shown that…
Off-line studies of the laser ionization of yttrium at the IGISOL facility
A laser ion source is under development at the IGISOL facility, Jyvaskyla, in order to address deficiencies in the ion guide technique. The key elements of interest are those of a refractory nature, whose isotopes and isomers are widely studied using both laser spectroscopic and high precision mass measurement techniques. Yttrium has been the first element of choice for the new laser ion source. In this work we present a new coupled dye-Ti:Sapphire laser scheme and give a detailed discussion of the results obtained from laser ionization of yttrium atoms produced in an ion guide via joule heating of a filament. The importance of not only gas purity, but indeed the baseline vacuum pressure in…
Precision mass measurements of neutron-rich yttrium and niobium isotopes
Abstract The atomic masses of neutron-rich 95–101 Y and 101–107 Nb produced in proton-induced fission of uranium were determined using the JYFLTRAP double Penning trap setup. Accuracies of better than 10 keV could be reached for most nuclides. The masses of 106,107 Nb were measured for the first time. The energies of the isomeric states in 96 Y and 100 Y were measured as 1541(10) keV and 145(15) keV. The niobium isotopes appear to be systematically less bound than the values given in the latest Atomic Mass Evaluation. The new data lie in a region of the nuclear chart characterised by the transition from spherical to strongly deformed shapes. These structural changes are explored by studying…
Reactor Decay Heat inPu239: Solving theγDiscrepancy in the 4–3000-s Cooling Period
The {beta} feeding probability of {sup 102,104,105,106,107}Tc, {sup 105}Mo, and {sup 101}Nb nuclei, which are important contributors to the decay heat in nuclear reactors, has been measured using the total absorption technique. We have coupled for the first time a total absorption spectrometer to a Penning trap in order to obtain sources of very high isobaric purity. Our results solve a significant part of a long-standing discrepancy in the {gamma} component of the decay heat for {sup 239}Pu in the 4-3000 s range.
QValues of the SuperallowedβEmittersAlm26,Sc42, andV46and Their Impact onVudand the Unitarity of the Cabibbo-Kobayashi-Maskawa Matrix
The $\ensuremath{\beta}$-decay ${Q}_{\mathrm{EC}}$ values of the superallowed beta emitters $^{26}\mathrm{Al}^{m}$, $^{42}\mathrm{Sc}$, and $^{46}\mathrm{V}$ have been measured with a Penning trap to a relative precision of better than $8\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}$. Our result for $^{46}\mathrm{V}$, 7052.72(31) keV, confirms a recent measurement that differed from the previously accepted reaction-based ${Q}_{\mathrm{EC}}$ value. However, our results for $^{26}\mathrm{Al}^{m}$ and $^{42}\mathrm{Sc}$, 4232.83(13) keV and 6426.13(21) keV, are consistent with previous reaction-based values. By eliminating the possibility of a systematic difference between the two t…
Towards in-jet resonance ionization spectroscopy : An injection-locked Titanium:Sapphire laser system for the PALIS-facility
This article presents a pulsed narrowband injection-locked Titanium:Sapphire laser aimed for high-resolution in-jet resonance ionization spectroscopy at the SLOWRI/PALIS at RIKEN. The laser has been integrated into the PALIS laser laboratory enabling it to be utilized with the existing broadband Titanium:Sapphire and dye lasers. The seed efficiency has been evaluated to be close to unity over the master laser wavelength range ∼ 753 to 791 nm, and the slope efficiency, namely the ratio of the pump power to the output power, was determined to be ∼ 30 % at 780 nm. A two-step ionization scheme with 386.4016 nm first step and 286.731 nm second step into an autoionizing state was developed for re…
Mass measurements and implications for the energy of the high-spin isomer in 94Ag.
Nuclides in the vicinity of 94Ag have been studied with the Penning trap mass spectrometer JYFLTRAP at the Ion-Guide Separator On-Line. The masses of the two-proton-decay daughter 92Rh and the beta-decay daughter 94Pd of the high-spin isomer in 94Ag have been measured, and the masses of 93Pd and 94Ag have been deduced. When combined with the data from the one-proton or two-proton-decay experiments, the results lead to contradictory mass excess values for the high-spin isomer in 94Ag, -46370(170) or -44970(100) keV, corresponding to excitation energies of 6960(400) or 8360(370) keV, respectively.
A sextupole ion beam guide to improve the efficiency and beam quality at IGISOL
The laser ion source project at the IGISOL facility, Jyvaskyla, has motivated the development and construction of an rf sextupole ion beam guide (SPIG) to replace the original skimmer electrode. The SPIG has been tested both off-line and on-line in proton-induced fission, light-ion and heavy-ion induced fusion-evaporation reactions and, in each case, has been directly compared to the skimmer system. For both fission and light-ion induced fusion, the SPIG has improved the mass-separated ion yields by a factor of typically 4 to 8. Correspondingly, the transmission efficiency of both systems has been studied in simulations with and without space charge effects. The transport capacity of the SP…
Improvements on Decay Heat Summation Calculations by Means of Total Absorption Gamma-ray Spectroscopy Measurements
The decay heat of fission products plays an important role in predictions of the heat released by nuclear fuel in reactors. In this contribution we present results of the analysis of the measurement of the beta decay of some refractory isotopes that were considered possible important contributors to the decay heat in reactors. The measurements presented here were performed at the IGISOL facility of the University of Jyvaeskylae, Finland. In our measurements we have combined for the first time a Penning trap (JYFLTRAP), which was used as a high resolution isobaric separator, with a total absorption spectrometer. The results of the measurements as well as their consequences for decay heat sum…
TAS measurements for reactor physics and nuclear structure
In this contribution we will present recent total absorption measurements of the beta decay of neutron‐rich nuclei performed at the IGISOL facility of the Univ. of Jyvaskyla. In the measurements the JYFL Penning Trap was used as a high resolution isobaric separator. The total absorption technique will be described and the impact of recent results in the fields of reactor physics (decay heat calculations) and nuclear structure will be discussed.
An ion guide for the production of a low energy ion beam of daughter products of α-emitters
A new ion guide has been modeled and tested for the production of a low energy ($\approx$ 40 kV) ion beam of daughter products of alpha-emitting isotopes. The guide is designed to evacuate daughter recoils originating from the $\alpha$-decay of a $^{233}$U source. The source is electroplated onto stainless steel strips and mounted along the inner walls of an ion guide chamber. A combination of electric fields and helium gas flow transport the ions through an exit hole for injection into a mass separator. Ion guide efficiencies for the extraction of $^{229}$Th$^{+}$ (0.06%), $^{221}$Fr$^{+}$ (6%), and $^{217}$At$^{+}$ (6%) beams have been measured. A detailed study of the electric field and …