0000000000923773
AUTHOR
Jean-luc Adam
Chalcogenide Microstructured Fibers for Infrared Systems, Elaboration, Modelization, and Characterization
special issue " Fiber Optic Research in France " (Part III of III); International audience; Chalcogenide fibers present numerous possible applications in the IR field. For many applications, single mode fibers must be obtained. An original way is the realization of microstructured optical fibers (MOFs) with solid core. These fibers present a broad range of optical properties thanks to the high number of freedom degrees of their geometrical structure. In this context, we have developed MOFs for near and mid IR transmission with different geometries and properties such as multimode or endless single-mode operation, small or large mode area fibers. We have also investigated numerically the mai…
Elaboration by casting method of low losses chalcogenide microstructured fibers for near and mid infrared applications
oral session C " Preparation and Property ", oral [TuA-16]; International audience
Small-core chalcogenide microstructured fibers for the infrared.
International audience; We report several small-core chalcogenide microstructured fibers fabricated by the "Stack & Draw" technique from Ge(15)Sb(20)S(65) glass with regular profiles. Mode field diameters and losses have been measured at 1.55 microm. For one of the presented fibers, the pitch is 2.5 microm, three times smaller than that already obtained in our previous work, and the corresponding mode field diameter is now as small as 3.5 microm. This fiber, obtained using a two step "Stack & Draw" technique, is single-mode at 1.55 microm from a practical point of view. We also report the first measurement of the attenuation between 1 and 3.5 microm of a chalcogenide microstructured fiber. …
Simulation of mid-IR amplification in Er3+-doped chalcogenide microstructured optical fiber
International audience; This paper deals with the design of an erbium doped microstructured optical fiber (MOF) amplifier operating in the mid-infrared (mid-IR) wavelength range, more precisely around 4.5 µm wavelength. A homemade numerical code which solves the rate equations and the power propagation equations has been ad hoc developed to theoretically investigate the feasibility of mid-IR MOF amplifier. On the basis of the measured energy level transition parameters of a Er3+-doped Ga5Ge20Sb10S65 chalcogenide glass, the amplifier feasibility is demonstrated exhibiting high gain and low noise figure.
Infrared monitoring of underground CO2 storage using chalcogenide glass fibers
International audience; An optical-fiber-based system suitable for monitoring the presence of carbon dioxide, so-called "greenhouse gas", is investigated. Since each pollutant gas shows a characteristic optical absorption spectrum in the mid-infrared (mid-IR), it is possible to detect selectively and quantitatively the presence of gases in a given environment by analysing mid-IR spectra. The main infrared signature of carbon dioxide gas is a double absorption peak located at 4.2 μm. Chalcogenide optical fibers, which can transmit light in the 1-6 μm range, are well-adapted for CO2 analysis. In this wavelength range, they show attenuation losses that compare favourably with other types of fi…
Chalcogenide glass hollow core photonic crystal fibers
International audience; We report the first hollow core photonic crystal fibers (HC PCF) in chalcogenide glass. To design the required HC PCF profiles for such high index glass, we use both band diagram analysis to define the required photonic bandgap and numerical simulations of finite size HC PCFs to compute the guiding losses. The material losses have also been taken into account to compute the overall losses of the HC PCF profiles. These fibers were fabricated by the stack and draw technique from Te20As30Se50 (TAS) glass. The fibers we drew in this work are composed of six rings of holes and regular microstructures. Two profiles are presented, one is known as a kagome lattice and the ot…
Low loss microstructured chalcogenide fibers for large non linear effects at 1995 nm
International audience; Microstructured optical fibers (MOFs) are traditionally prepared using the stack and draw technique. In order to avoid the interfaces problems observed in chalcogenide glasses, we have developed a new casting method to prepare the chalcogenide preform. This method allows to reach optical losses around 0.4 dB/m at 1.55 µm and less than 0.05 dB/m in the mid IR. Various As(38)Se(62) chalcogenide microstructured fibers have been prepared in order to combine large non linear index of these glasses with the mode control offered by MOF structures. Small core fibers have been drawn to enhance the non linearities. In one of these, three Stokes order have been generated by Ram…
Elaboration and characterizations of solid core and holow core microstructured chalcogenide fibers
Symposium 25 " Glasses for Optoelectronic and Optical Applications ", Session " Glass Fibers " [PACRIM8-S25-039-2009]; International audience
Chalcogenide Glasses Based on Germanium Disulfide for Second Harmonic Generation
International audience; High second-order susceptibilities are created by thermal poling in bulk germanium disulfide based chalcogenide glasses. Experimental conditions of the poling treatment (temperature, voltage, time) were optimized for each glass composition. The second-order nonlinear signals were recorded by using the Maker fringes experiment and a second-order coefficient χ(2) up to 8 pm V-1 was measured in the Ge25Sb10S65 glass. This value is obtained using a simulation based on accurate knowledge of the thickness of the nonlinear layer. Two mechanisms are proposed to explain the creation of a nonlinear layer under the anode: the formation and the migration of charged defects towar…
Er3+-doped GeGaSbS glasses for mid-IR fibre laser application: Synthesis and rare earth spectroscopy
International audience; With an infrared transparency extended to 10 µm, low multiphonon relaxation rates and suitable rare earth solubility, sulphide glasses in the Ge-Ga-Sb-S system allow radiative emission from rare earth ions in the mid-IR range. The Er3+ ion, widely studied in glass fibres for optical amplification at 1.5 µm, presents an interesting transition for mid-IR applications around 4.5 µm (4I9/2→ 4I11/2). Thus, the aim of this work is to evaluate the Er3+-doped Ge20Ga5Sb10S65 glass as a potential fibre laser source operating in the 3-5 µm mid-IR spectral region. For that purpose, absorption and emission spectra were recorded from visible to mid-IR and the radiative lifetimes o…
Te-As-Se glass microstructured optical fiber for the middle infrared
International audience; We present the first fabrication, to the best of our knowledge, of chalcogenide microstructured optical fibers in Te-As-Se glass, their optical characterization, and numerical simulations in the middle infrared. In a first fiber, numerical simulations exhibit a single-mode behavior at 3.39 and 9.3 μm, in good agreement with experimental near-field captures at 9.3 μm. The second fiber is not monomode between 3.39 and 9.3 μm, but the fundamental losses are 9 dB/m at 3:39 μm and 6 dB/m at 9.3 μm. The experimental mode field diameters are compared to the theoretical ones with a good accordance.