Apparato e metodo per il recupero di rame a partire da scarti di dispositivi elettrici ed elettronici

Il brevetto riguarda un metodo ed il relativo dispositivo per il recupero di rame metallico puto da RAEE

Study of a Novel Electrochemical Method for Copper Recovery from Waste Printed Circuit Boards

This study was carried out to recover copper from printed circuit boards of waste computers through an electrochemical process. To simplify the overall recovery process, large pieces of printed circuit boards were used instead of pulverized samples. In particular, these large pieces were directly used as an anode for copper electrorefining. For this purpose, electronic components and solder mask were initially removed from the boards. The electronic components can be treated separately to recover precious metals using various methods. The removal of solder mask was necessary to expose copper layers to the electrolytic solution and it was removed by a chemical treatment with sodium hydroxide…

NANOSTRUCTURED ANODE MATERIAL FOR Li-ION BATTERY OBTAINED BY GALVANIC PROCESS

The accumulation of energy by batteries plays a fundamental role for the production of electrical energy and for its efficient management. Between different storage systems the lithium-ion battery are considered very interesting. Although they are now a well-established commercial reality, they are still subject of vigorous research efforts, in order to make improvements primarily in terms of costs, safety and energy density. The latter is in fact still low compared to that of fossil fuels, if you think to the automotive field. In particular efforts are focused towards the identification of valid alternatives to the electrode materials so as to overcome the limitations and extend the use of…

Dismantling and electrochemical copper recovery from Waste Printed Circuit Boards in H2SO4–CuSO4–NaCl solutions

Abstract The worldwide growing of electrical and electronic equipment makes increasingly urgent to find environmentally friendly treatments for e-waste. In this paper, the attention has been focused on i) the eco-friendly dismantling of the electronic components from Waste Printed Circuit Boards and ii) recovering of pure metallic copper, which is the most abundant metal and one of the most valuable in Printed Circuit Boards. After an experimental optimization study, we found that a solution containing 0.5 M H2SO4, 0.4 M CuSO4, and 4 M NaCl can be successfully used to disassemble the electronic components from the boards by leaching of all exposed metals. Air was blown into the leaching sol…

Nanostructured Electrochemical Devices for Sensing, Energy Conversion and Storage

Nanomaterials are very promising to enhance device performances for sensing, sustainable energy production, and energy conversion and storage, as extensively reported in the literature [1-3]. In this field, one of the most severe challenge is to find suitable methods for fabricating nanomaterials. Over the years, numerous preparation methods were proposed in the literature, but not all of them are easily scalable and economically advantageous for industrial application. In this context, electrochemical deposition in template is a facile method for fabricating either two- or one-dimensional nanostructured materials because it allows to easily adjust the fundamental parameters controlling the…

Pb-PbOHCl Composite Nanowires Synthesized by Galvanic Deposition in Template

In this paper, we report a detailed study on the synthesis of composite nanowires of Pb-PbOHCl via galvanic deposition into the pores of a membrane acting as a template. PbOHCl deposition quantitatively occurs as the solution pH exceeds the value of about 4.12. Simultaneously, owing to the galvanic coupling, electro-deposition of lead occurs, so composite nanowires were formed. The role of different parameters controlling the kinetic evolution of the process, such as oxygen bubbling, solution pH, surface area and type of sacrificial anode were investigated one at a time. The results suggest that every modification accelerating the alkalization of the solution inside the template pores favor…

Synthesis of Silver Gallium Selenide (AgGaSe2) Nanotubes and Nanowires by Template-Based Electrodeposition

In this work, a systematic investigation of the different parameters that control the electrodeposition processes was carried out at the aim to synthetizing AgGaSe₂ nanostructures. We found that pH is a key parameter to control both the morphology and composition of the nanostructures. Low pH favours mainly the formation of Ag2Se nanotubes with a scarce mechanical stability, while multi-phase nanowires well anchored to the substrate were obtained at higher pH. We also found that it was necessary to increase dramatically the concentration of the gallium precursor into the deposition bath in order to obtain AgGaSe₂ owing to lower redox potential of the Ga3+/Ga couple than Ag2+/Ag and Se4+/Se.…

Dismantling and copper recovery from Waste Printed Circuit Boards (WPCBs) using an integrated hydro-electrometallurgical approach

Metodo per la realizzazione di sensori elettrochimici con materiali recuperati da dispositivi di memorizzazione di scarto e sensore elettrochimico ottenibile con tale metodo

Metodo per la realizzazione di sensori elettrochimici con materiali recuperati da dispositivi di memorizzazione di scarto, quali CD e DVD

Electrochemical deposition of Ag2Se nanostructures

Abstract AgSe based nanostructures (nanowires or nanotubes) were obtained by electrodeposition. A systematic investigation was carried out, varying concentration of the precursors, pH of the electrolytic solution, ligands, and deposition mode, to study the effect of all these parameters on the growth of nanostructures. Nanostructure morphology depends also on the type of metal that was used as support, due to the secondary reaction of hydrogen evolution. On Ni support, the H2 evolution reaction led to formation of only nanotubes, while on copper substrate also nanowires were obtained. Composition of nanostructures depends strongly on solution pH. X-ray diffraction and Raman spectroscopy sho…

Nanostructured Electrochemical Devices for Sensing, Energy Conversion and Storage

Nanostructured materials are attracting growing interest for improving performance of devices and systems of large technological interest. In this work, the principal results about the use of nanostructured materials in the field of electrochemical energy storage, electrochemical water splitting, and electrochemical sensing are presented. Nanostructures were fabricated with two different techniques. One of these was the electrodeposition of the desired material inside the channels of a porous support acting as template. The other one was based on displacement reaction induced by galvanic contact between metals with different electrochemical nobility. In the present work, a commercial polyca…

Metodo e Kit per il recupero di piombo metallico da componenti di un accumulatore esausto al piombo-acido

il metodo consente di ripristinare le piastre presenti nelle batterie al piombo acido esauste per recuperare il piombo presente e per riutilizzarle direttamente in nuove batterie