Liquid crystalline phases from polymer functionalised semiconducting nanorods
The orientation of semiconducting nanomaterials is a hot topic in optoelectronic applications. Liquid crystallinity offers the potential to orient inorganic anisotropic nanorods, if they can be solubilised sufficiently as realised by polymer functionalisation. In this work we functionalised TiO2, SnO2, ZnO and CdTe nanorods with PMMA, PS and PDEGMEMA (poly(diethylene glycol monomethyl ether) methacrylate) diblock copolymers containing anchor groupsvia grafting-to. The block copolymers were synthesised by RAFT polymerisation (PDI ≈ 1.2) via reactive ester diblock copolymers, which were functionalised later with anchor units polymer-analogously. The surface coverage of the nanorods (determine…
Mismatch strain versus dangling bonds: formation of "coin-roll nanowires" by stacking nanosheets.
Controlled Crystallization of CaCO3on Hyperbranched Polyglycerol Adsorbed to Self-Assembled Monolayers
The formation of biominerals by living organisms is governed by the cooperation of soluble and insoluble macromolecules with peculiar interfacial properties. To date, most of the studies on mineralization processes involve model systems that only account for the existence of one organic matrix and thus disregard the interaction between the soluble and insoluble organic components that is crucial for a better understanding of the processes taking place at the inorganic-organic interface. We have set up a model system composed of a matrix surface, namely, a self-assembled monolayer (SAM), and a soluble component, hyperbranched polyglycerol. The model mineral calcium carbonate displays diverse…
Plant extracts as green reductants for the synthesis of silver nanoparticles: lessons from chemical synthesis.
The increasing use of silver (Ag) nanoparticles (NPs) in daily-life applications, electronics, or catalysis calls for green and cost-efficient synthetic methods. Ag NPs are used especially in biomedicine because of their antibacterial, antifungal, or anticancer properties. Chemical synthesis allows tuning the particle morphology, size, and crystallinity, but requires toxic and hazardous chemicals. Bioinspired synthetic protocols have shown promise to minimize environmental impact, but biological protocols for the synthesis of Ag NPs lack control on the morphology and crystallinity. This review briefly compiles the chemical synthesis of Ag NPs and contrasts it with "green" protocols based on…
Calcium Sulfate Nanoparticles with Unusual Dispersibility in Organic Solvents for Transparent Film Processing
Calcium sulfate is one of the most important construction materials. Today it is employed as high-performance compound in medical applications and cement mixtures. We report a synthesis for calcium sulfate nanoparticles with outstanding dispersibility properties in organic solvents without further functionalization. The nanoparticles (amorphous with small γ-anhydrite crystallites, 5–50 nm particle size) form long-term stable dispersions in acetone without any sign of precipitation. 1H NMR spectroscopic techniques and Fourier-transform infrared spectroscopy (FTIR) reveal absorbed 2-propanol on the particle surfaces that induce the unusual dispersibility. Adding water to the nanoparticle disp…
Highly efficient and stable dye-sensitized solar cells based on SnO2nanocrystals prepared by microwave-assisted synthesis
Highly efficient dye-sensitized solar cells (DSSCs) with excellent long-term stability were fabricated based on tin(IV) oxide (SnO2) nanocrystals with tunable morphologies and band energy levels. The nanocrystals were prepared by a facile, fast, and energy-saving microwave-assisted solvothermal reaction. Through variation of the precursor base used during nanocrystal synthesis control over morphology was achieved—precursor metal cations are known to have a strong influence on the growth process of SnO2 nanostructures. A simple and economic way to prepare semiconducting pastes for photoanodes was devised. The photovoltaic performance of dye-sensitized solar cells based on SnO2 photoanodes wa…
Mixed Ligand Shell Formation upon Catechol Ligand Adsorption on Hydrophobic TiO2 Nanoparticles
Modifying the surfaces of metal oxide nanoparticles (NPs) with monolayers of ligands provides a simple and direct method to generate multifunctional coatings by altering their surface properties. T...
Blue light mediated C–H arylation of heteroarenes using TiO2as an immobilized photocatalyst in a continuous-flow microreactor
Titanium dioxide was applied as an immobilized photocatalyst in a microstructured falling film reactor for the continuous-flow C-H arylation of heteroarenes with aryldiazonium salts as the starting material. Detailed investigations of the catalyst and a successful long-term run proved its excellent usability for this process. Very good yields up to 99% were achieved with broad substrate scope and were compared with batch synthesis. The transfer to the continuous-flow mode revealed an impressive boost in reactor performance solely resulting from the improved irradiation and contact of the catalyst, substrate and light.
Influence of Compensating Defect Formation on the Doping Efficiency and Thermoelectric Properties of Cu2-ySe1–xBrx
The superionic conductor Cu_(2−δ)Se has been shown to be a promising thermoelectric at higher temperatures because of very low lattice thermal conductivities, attributed to the liquid-like mobility of copper ions in the superionic phase. In this work, we present the potential of copper selenide to achieve a high figure of merit at room temperature, if the intrinsically high hole carrier concentration can be reduced. Using bromine as a dopant, we show that reducing the charge carrier concentration in Cu_(2−δ)Se is in fact possible. Furthermore, we provide profound insight into the complex defect chemistry of bromine doped Cu_(2−δ)Se via various analytical methods and investigate the conseque…
Reactive Polymers: A Versatile Toolbox for the Immobilization of Functional Molecules on TiO2 Nanoparticles
V2O5 nanowires with an intrinsic peroxidase-like activity
V2O5 nanowires exhibit an intrinsic catalytic activity towards classical peroxidase substrates such as 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 3,3,5,5,-tetramethylbenzdine (TMB) in the presence of H2O2. These V2O5 nanowires show an optimum reactivity at a pH of 4.0 and the catalytic activity is dependent on the concentration. The Michaelis-Menten kinetics of the ABTS oxidation over these nanowires reveals a behavior similar to that of their natural vanadium-dependent haloperoxidase (V-HPO) counterparts. The V2O5 nanowires mediate the oxidation of ABTS in the presence of H2O2 with a turnover frequency (k(cat)) of 2.5 x 10(3) s(-1). The K-M values of the V2O5 nanowire…
Reply to “Mirror Symmetry Breaking” of the Centrosymmetric CaCO3 Crystals with Amino Acids
Bond strength dependent superionic phase transformation in the solid solution series Cu2ZnGeSe4−xSx
Recently, copper selenides have shown to be promising thermoelectric materials due to their possible superionic character resulting from mobile copper cations. Inspired by this recent development in the class of quaternary copper selenides we have focused on the structure-to-property relationships in the solid solution series Cu2ZnGeSe4−xSx. The material exhibits an insulator-to-metal transition at higher temperatures, with a transition temperature dependent on the sulfur content. However, the lattice parameters show linear thermal expansion at elevated temperatures only and therefore no indication of a structural phase transformation. 63Cu nuclear magnetic resonance shows clear indications…
ChemInform Abstract: Nb2Te3, a Niobium Sesquitelluride with Te22- Groups.
The new binary compound Nb2Te3 was synthesized by reduction of NbTe2 with Ga metal; different from the formally analogous Ta2Te3 it crystallizes in the Mo2As3 structure type; based on the results of band structure calculations Nb2Te3 is metallic with quasi one-dimensional metal electronic properties.
Anti-oxidative effects and harmlessness of asymmetric Au@Fe3O4 Janus particles on human blood cells
AbstractThe physical properties of asymmetric Janus particles are highly promising for future biomedical applications. However, only a few data is available on their biological impact on human cells. We investigated the biological impact of different Au@Fe3O4 Janus particle formulations in vitro to analyse specific uptake modalities and their potential cytotoxic effects on human cells of the blood regarding intravenous injection. We demonstrate that Au@Fe3O4 Janus particles exhibit a similar or even better biocompatibility compared to the well-studied spherical iron oxide nanoparticles. The impact of Janus particles on cells depends mainly on three factors. (1) Surface functionalization: NH…
Biofabrication of biosilica-glass by living organisms
Biosilicification is an evolutionarily old and widespread type of biomineralization both in unicellular and multicellular organisms, including sponges, diatoms, radiolarians, choanoflagellates, and higher plants. In the last few years combined efforts in molecular biology, cell biology, and inorganic and analytical chemistry have allowed the first insight into the molecular mechanisms by which these organisms form an astonishing variety of siliceous structures that cannot be achieved by chemical methods. Here we report about the present stage of knowledge on structure, biochemical composition, and mechanisms of biosilica formation, focusing our attention particularly on sponges because of t…
Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles
Abstract Crystalline ZrO2 nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO2 with plate-like morphology, and nanoparticles of the cubic ZrO2 high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic p…
Carbon-Coated Anatase TiO2Nanotubes for Li- and Na-Ion Anodes
aInstitute of Physical Chemistry and MEET Battery Research Centre, University of Muenster, 48149 Muenster, Germany bHelmholtz-Institute Ulm (HIU), Electrochemistry I, 89081 Ulm, Germany cKarlsruher Institute of Technology (KIT), 76021 Karlsruhe, Germany dInstitute for Organic Chemistry, University of Mainz, 55128 Mainz, Germany eGraduate School Materials Science in Mainz, 55128 Mainz, Germany fInstitute for Inorganic and Analytical Chemistry, University of Mainz, 55128 Mainz, Germany gMax Planck Institute for Polymer Research, 55128 Mainz, Germany
Properties of spark plasma sintered nanostructured Zn1+xSb
Engineering materials with specific physical properties has recently focused on the effect of nanoscopic inhomogeneities at the 10 nm scale. Such features are expected to scatter medium and long-wavelength phonons lowering thereby the thermal conductivity of the system without simultaneously decreasing the charge transport (phonon–glass electron–crystal concept). A new Zn1+xSb nanophase obtained by a wet chemical approach was densified by spark plasma sintering (SPS). Investigations on compounds subsumed as “Zn4Sb3” always suffer from its low thermal stability and the contamination of the nanoparticles with solvents and additives used in the synthesis. In order to gain insight into this com…
Facile synthesis and characterization of functionalized, monocrystalline rutile TiO2 nanorods.
Functionalized, monocrystalline rutile TiO2 nanorods were prepared from TiCl4 in aqueous solution under acidic conditions in the presence of dopamine, followed by aging and hydrothermal treatment at 150 degrees C. The surface-bound organic ligand controls the morphology as well as the crystallinity and the phase selection of TiO2. The presence of monocrystalline rutile TiO2 was confirmed by X-ray powder diffraction and HRTEM investigations. The as-prepared nanorods are soluble in water at pH3. The surface functionalization was analyzed by IR and 1H NMR, confirming the presence of dopamine on the surface. The surface amine groups can be tailored further with functional molecules such as dyes…
Pd@Fe2O3 Superparticles with Enhanced Peroxidase Activity by Solution Phase Epitaxial Growth
Compared to conventional deposition techniques for the epitaxial growth of metal oxide structures on a bulk metal substrate, wet-chemical synthesis based on a dispersible template offers advantages such as low cost, high throughput, and the capability to prepare metal/metal oxide nanostructures with controllable size and morphology. However, the synthesis of such organized multicomponent architectures is difficult because the size and morphology of the components are dictated by the interplay of interfacial strain and facet-specific reactivity. Here we show that solution-processable two-dimensional Pd nanotetrahedra and nanoplates can be used to direct the epitaxial growth of γ-Fe2O3 nanoro…
Diffusion-Driven Formation of MoS2 Nanotube Bundles Containing MoS2 Nanopods
MoS2 nanotube bundles, along with embedded nested fullerenes, were formed in a gas-phase reaction of molybdenum carbonyl and H2S gas with the assistance of I2. The amorphous Mo-S-I precursor particles obtained by quenching a modified metal organic chemical vapor deposition (MOCVD) reaction in a large temperature gradient were annealed at elevated temperature in an inert atmosphere. Under the influence of the iodine, the amorphous precursor formed a surface film with an enhanced mobility of the molybdenum and sulfur components. Point defects within the MoS2 layers, combined with the enhanced surface diffusion, lead to a scrolling of the inherently unstable MoS2 lamellae. The role of the reac…
Thermoelectric properties of Sr_3GaSb_3 – a chain-forming Zintl compound
Inspired by the promising thermoelectric properties in the Zintl compounds Ca_3AlSb_3 and Ca_5Al_2Sb_6, we investigate here the closely related compound Sr_3GaSb_3. Although the crystal structure of Sr_3GaSb_3 contains infinite chains of corner-linked tetrahedra, in common with Ca_3AlSb_3 and Ca_5Al_2Sb_6, it has twice as many atoms per unit cell (N = 56). This contributes to the exceptionally low lattice thermal conductivity (κ_L = 0.45 W m^(−1) K^(−1) at 1000 K) observed in Sr_3GaSb_3 samples synthesized for this study by ball milling followed by hot pressing. High temperature transport measurements reveal that Sr_3GaSb_3 is a nondegenerate semiconductor (consistent with Zintl charge-coun…
V2O5 nanowires with an intrinsic iodination activity leading to the formation of self-assembled melanin-like biopolymers
V2O5 nanowires act as biomimetic catalysts resembling vanadium haloperoxidases (V-HPO). The nanowires display iodinating activity as confirmed by a colorimetric assay using thymol blue (TB), UV/Vis spectrophotometry and mass spectrometry (FD-MS). In the presence of dopamine these nanowires catalyze the fast and efficient synthesis of melanin-like biopolymers under mild conditions (aqueous solution, neutral pH and room temperature). The resulting melanin-like biopolymer obtained by the V2O5 nanowire catalysts was characterized by scanning electron microscopy (SEM), X-ray diffraction, UV-Vis, FT-IR and electric conductivity resembling the natural biopolymer both in its chemical and morphologi…
Soft-Chemical Growth ofγ-FeO(OH) Films on Self-Assembled Monolayers of Substituted Alkylthiols on Gold(111)
Surface Defects as a Tool to Solubilize and Functionalize WS 2 Nanotubes
Layered transition metal dichalcogenides contain a number of crystal defects which significantly change their properties may be beneficial or detrimental for a specific application. We have prepared defect-rich multiwalled WS2 nanotubes by reductive sulfidization of W18O49 nanowires that were obtained solvothermally from tungsten chloride in different alcohols. The synthesis of the W18O49 nanowires was monitored and their morphological characteristics (e. g. length, rigidity and aspect ratio) are described in detail. The effect of morphology of the nanowires on the synthesis of WS2 nanotubes was investigated in order to obtain WS2 nanotubes that are highly solvent dispersible. Dispersions o…
Hydrate Networks under Mechanical Stress – A Case Study for Co 3 (PO 4 ) 2 ·8H 2 O
The nature of the bound water in solids with hydrogen-bonded networks depends not only on temperature and pressure but also on the nature of the constituents. The collapse and reorientation of these network structures determines the stability of hydrated solids and transitions to other crystalline or amorphous phases. Here, we study the mechanochemically induced loss of bound water in Co₃(PO₄)₂·8H₂O and compare this process to the behavior under hydrostatic pressure. The associated phase transition and its kinetics were monitored by X-ray powder diffraction with Synchrotron radiation and quantitative IR spectroscopy. High shearing forces are responsible for the degradation of the hydrogen-b…
Optimizing the Binding Energy of the Surfactant to Iron Oxide Yields Truly Monodisperse Nanoparticles.
Despite the great progress in the synthesis of iron oxide nanoparticles (NPs) using a thermal decomposition method, the production of NPs with low polydispersity index is still challenging. In a thermal decomposition synthesis, oleic acid (OAC) and oleylamine (OAM) are used as surfactants. The surfactants bind to the growth species, thereby controlling the reaction kinetics and hence playing a critical role in the final size and size distribution of the NPs. Finding an optimum molar ratio between the surfactants oleic OAC/OAM is therefore crucial. A systematic experimental and theoretical study, however, on the role of the surfactant ratio is still missing. Here, we present a detailed exper…
Strong stabilization of amorphous calcium carbonate emulsion by ovalbumin: gaining insight into the mechanism of 'polymer-induced liquid precursor' processes.
8 pages; International audience; The impact of the ovo proteins ovalbumin and lysozyme-present in the first stage of egg shell formation-on the homogeneous formation of the liquid amorphous calcium carbonate (LACC) precursor, was studied by a combination of complementing methods: in situ WAXS, SANS, XANES, TEM, and immunogold labeling. Lysozyme (pI = 9.3) destabilizes the LACC emulsion whereas the glycoprotein ovalbumin (pI = 4.7) extends the lifespan of the emulsified state remarkably. In the light of the presented data: (a) Ovalbumin is shown to behave commensurable to the 'polymer-induced liquid precursor' (PILP) process proposed by Gower et al. Ovalbumin can be assumed to take a key rol…