Search results for " Emission"
showing 10 items of 1496 documents
Identification of a specific type of PD from acoustic emission frequency spectra
2001
The paper presents an attempt to apply spectral analysis tools in processing acoustic emission (AE) pulses generated by partial discharge (FD). The experimental part of the paper describes spark gaps generating four types of PD and specifies parameters of measured acoustic signals and recalls the system used for measurement and analysis of the frequency spectra. Also, a spectral analysis procedure is presented, and frequency-domain descriptors characterizing AE pulses are defined. The results of the analysis are given both as time plots and amplitude and energy density spectra, related to values of the associated descriptors. The spectral analysis results cover AE pulses generated in system…
Comparative analysis of acoustic emission signals generated by electrical discharges measured by the hydrophone and the wideband contact transducer
2005
The paper presents a comparative analysis of the acoustic emission (AE) pulses and signals generated by PDs. For this purpose the measurements of the acoustic emission signals generated by PDs were taken in the multipoint-plane system using a hydrophone placed directly in the area of discharge generation, and the AE pulses using a piezoelectric contact transducer which was on a side wall of a power transformer tub. Next, time runs and amplitude density spectra were drawn. Also the descriptors describing signals in the frequency domain were determined and the time-frequency analysis was carried out, which determined spectrograms for the energy density spectrum.
Stimulated Raman and Cars Spectroscopy of ν1 and 2ν2 (A1) Bands of 12CF4
1994
Two experimental coherent Raman techniques, stimulated Raman and coherent anti-Stokes Raman spectroscopy (CARS), were employed to study the Raman spectrum of CF 4 in the 900 cm −1 region. The stimulated Raman and CARS spectra of the ν 1 band of CF 4 were recorded at high resolution. The analysis of these spectra enabled some spectroscopic constants of this band to be refined and higher order constants to be determined for the first time. The first high-resolution CARS spectrum of the 2ν 2 (A 1 ) harmonic band is also presented. The rotational transitions of this band up to J = 40 were assigned and the first set of spectroscopic constants for this sub-level were determined. These results imp…
Trace elemental composition of curry by inductively coupled plasma optical emission spectrometry (ICP-OES)
2008
A methodology based on inductively coupled plasma optical emission spectrometry (ICP-OES) after microwave-assisted acid digestion was developed to determine the content of traces elements in curry samples from the Spanish market. The methodology was validated in terms of accuracy by the analysis of citrus and tomato leaf reference materials achieving comparable results with the certified values. The trace metal content of curry samples was compared with data available from previously published reports concerning Indian samples, especially in terms of heavy metal composition, in order to guarantee the quality of the commercially available spices in the European countries. Values found for th…
Optimization of operating conditions of axially and radially viewed plasmas for the determination of trace element concentrations from ultrasound-ass…
2006
Abstract The method of ultrasound-assisted extraction followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of trace element concentrations (arsenic, copper, lead, antimony, and zinc) in shooting range areas was optimized. Optimization was achieved not only on the basis of the analysis of appropriate standard reference materials but also on that of 31 synthetic mixtures of matrix and analyte elements (aluminum, antimony, arsenic, calcium, copper, lead, iron, manganese, silicon, and zinc), in five concentrations. All the measurements were performed in robust plasma conditions which were tested by measuring the Mg II 280.270 nm/Mg I 285.213 …
Effect of Reynolds number and lithium cation insertion on titanium anodization
2016
This work studies the influence of using hydrodynamic conditions (Reynolds number, Re = 0 to Re = 600) during Ti anodization and Li+ intercalation on anatase TiO2 nanotubes. The synthesized photocatalysts were characterized by using Field Emission Scanning Electron Microscope (FE-SEM), Raman Confocal Laser Microscopy, Electrochemical Impedance Spectroscopy (EIS), Mott-Schottky analysis (M-S), photoelectrochemical hydrogen production and resistance to photocorrosion tests. The obtained results showed that the conductivity of the NTs increases with Li+ intercalation and Re. The latter is due to the fact that the hydrodynamic conditions eliminate part of the initiation layer formed over the tu…
A study of the effect of molecular and aerosol conditions in the atmosphere on air fluorescence measurements at the Pierre Auger Observatory
2010
The air fluorescence detector of the Pierre Auger Observatory is designed to perforin calorimetric measurements of extensive air showers created by Cosmic rays of above 10(18) eV. To correct these measurements for the effects introduced by atmospheric fluctuations, the Observatory contains a group Of monitoring instruments to record atmospheric conditions across the detector site, ail area exceeding 3000 km(2). The atmospheric data are used extensively in the reconstruction of air showers, and are particularly important for the correct determination of shower energies and the depths of shower maxima. This paper contains a summary of the molecular and aerosol conditions measured at the Pierr…
Brown Carbon Aerosol in Urban Xi'an, Northwest China: The Composition and Light Absorption Properties.
2018
Light-absorbing organic carbon (i.e., brown carbon or BrC) in the atmospheric aerosol has significant contribution to light absorption and radiative forcing. However, the link between BrC optical properties and chemical composition remains poorly constrained. In this study, we combine spectrophotometric measurements and chemical analyses of BrC samples collected from July 2008 to June 2009 in urban Xi'an, Northwest China. Elevated BrC was observed in winter (5 times higher than in summer), largely due to increased emissions from wintertime domestic biomass burning. The light absorption coefficient of methanol-soluble BrC at 365 nm (on average approximately twice that of water-soluble BrC) w…
Borate-driven gatelike scaffolding using mesoporous materials functionalised with saccharides.
2009
We report the development of an MCM-41 mesoporous support that is functionalised with saccharides at the pore outlets and contains the dye [Ru(bipy)(3)](2+) in the pores (solid S1; bipy = 2,2'-bipyridyl). For this hybrid system, the inhibition of mass transport of the dye from the pore voids to the bulk solution in the presence of borate is demonstrated in water at neutral pH. The formation of the corresponding boroester derivative is related to the selective reaction of borate with the appended saccharides. This control is selective and only anion borate, among several anions and cations, can act as a molecular tap and inhibit the delivery of the entrapped guest. Additionally, the S1-borat…
The determination of antimony and arsenic concentrations in fly ash by hydride generation inductively coupled plasma optical emission spectrometry
2011
Abstract Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) was used in the determination of As and Sb concentrations in fly ash samples. The effect of sample pre-treatment reagents and measurement parameters used for hydride generation was evaluated. Due to memory effects observed, the appropriate read delay time was adjusted to 60 s resulting in RSDs 0.6% and 2.3% for As and Sb, respectively. The most suitable volumes of pre-reduction reagents for 10 mL of sample were 4 mL of KI/ascorbic acid (5%) and 6 mL of HCl (conc.). The determination of Sb was significantly interfered by HF, but the interference could be eliminated by adding 2 mL of saturated bo…