Search results for " Metals"
showing 10 items of 462 documents
Characterization and properties of PEO coatings on 7075 Al alloy grown in alkaline silicate electrolyte containing KMnO 4 additive
2017
Abstract Plasma electrolytic oxidation (PEO) was used to modify the surface of 7075 Al alloy by applying a bipolar pulsed-current in a silicate based electrolyte containing 0 to 3 g L− 1 KMnO4. For the coating produced in the base electrolyte, crystalline γ-Al2O3 was the main phase, while the coatings formed at the presence of KMnO4 consisted of α-Mn2O3 containing Si and Al oxides. A pancake structure was observed on surface of the coating produced in the base electrolyte, while a foam feature along with some volcano-like areas was detected on the surface of the coatings produced in the presence of KMnO4. The KMnO4 changed the discharge type leading to diminish the pores at the metal/coatin…
The Amorphous Semiconductor Schottky Barrier Approach to Study the Electronic Properties of Anodic Films on Ti
2017
A detailed study of the electronic properties of thin (>20 nm) anodic TiO2 potentiostatically grown on titanium in two different solutions is presented. The results show that the nature of the anodizing solution affects the electronic properties of the anodic film and, more specifically, the density of electronic states (DOS) distribution. Different DOS were derived from the experimental data analyzed according to the theory of amorphous semiconductor (a-SC) Schottky barrier. It is shown that the usual non-linear and frequency dependent Mott-Schottky plots are in agreement with expected theoretical behavior of a-SC Schottky barrier.
Pluronic nanoparticles as anti-oxidant carriers for polymers
2016
Abstract The immobilization of anti-oxidant stabilizers for polymers, particularly naturally occurring systems, can be considered a valuable route for preventing their migration, volatilization, thermo-degradation and decomposition at typical high processing temperatures, as well as for enhance their solubility in polymers. In this work, an innovative approach for the immobilization of naturally occurring stabilizer, through the encapsulation in copolymer nanoparticles, is proposed. Pluronic nanoparticles (PNPs), based on PEO-PPO-PEO, (PEO: poly (ethylene oxide); PPO: poly(propylene oxide)), without and with quercetin, Q, have been successfully formulated and the critical micellar condition…
Polymeric micelles as a new generation of anti-oxidant carriers
2017
A promising strategy to immobilize a natural stabilizer in polymeric films is presented. Par-Ticularly, nevadensin (N, a natural basil flavonoid) molecules have been encapsulated in Pluronic F-127 micelles [F127, a triblock copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)] and the obtained nanoparticles have been introduced in poly(ethylene glycol), PEG [otherwise known as poly(ethylene oxide), PEO]. In order to verify the effectiveness of the micelles as anti-oxidant carriers, PEG-based films have been subjected to artificial weathering. The encapsulation of anti-oxidant molecules allows the enhancement of N solubility in PEG, leading to advanced materials with enh…
Thermo-oxidative stabilization of poly(lactic acid)-based nanocomposites through the incorporation of clay with in-built antioxidant activity
2017
In this work, an innovative approach to overcome the issue of the poor thermo-oxidative stability of polymer/clay nanocomposites is proposed. Specifically, biodegradable poly(lactic acid) (PLA)-based nanocomposites, containing organo-modified clay with in-built antioxidant activity, were prepared. Through a two-step chemical protocol, a hindered phenol antioxidant was chemically linked to the ammonium quaternary salt which was then intercalated between the clay platelets [(AO)OM-Mt]. The nanocomposites were characterized and their thermo-oxidative stability during melt processing and under long-term thermal test conditions was investigated. PLA nanocomposites containing the (AO)OM-Mt showed…
Multiple points of view of heteronuclear NOE: long range vs short range contacts in pyrrolidinium based ionic liquids in the presence of Li salts.
2015
The nuclear Overhauser enhancement (NOE) is a powerful tool of NMR spectroscopy extensively used to gain structural information in ionic liquids (ILs). A general model for the distance dependence of intermolecular NOE in ILs was recently proposed showing that NOE spots beyond the first solvation shell and accounts for long-range effects. This conclusion prompted for a deep rethinking of the NOE data interpretation in ILs. In this paper we present an extensive and quantitative study of N-propyl-N-methyl pyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR13TFSI), the homologue with bis(fluorosulfonyl)imide (PYR13FSI), and their mixtures with LiTFSI based on 1H-19F and 1H-7LiNOE correlation …
Study of the coordination of ortho-tyrosine and trans-4-hydroxyproline with aluminum(III) and iron(III)
2018
Abstract The coordination of amino acids ortho-tyrosine (o-Tyr, 1) and trans-4-hydroxyproline (HPro, 2) with the biologically important trivalent metal ions Al(III) and Fe(III) in aqueous solution was investigated by 1H and 13C high resolution NMR, Laser Desorption Mass Spectrometry (LD-MS), and MS/MS experiments. Potentiometric measurements were also carried out in 0.16 M NaCl, 37 °C, by varying the pH between 2.0 and 3.5. NMR spectra recorded on aqueous solutions of amino acids 1 or 2 in the presence of the appropriate trivalent metal chloride suggested that binding of Al(III) and Fe(III) involved the COOH and NH2 functional groups of ligands, while their phenolic and alcoholic groups whi…
Hyaluronic Acid Derivative with Improved Versatility for Processing and Biological Functionalization
2016
A hydrophobic/amino functionalized derivative of hyaluronic acid (HA-EDA-C18 ) has been processed by salt leaching technique as porous scaffold without need of chemical crosslinking. Aim of this work is to demonstrate the improved versatility of HA-EDA-C18 in terms of processing and biological functionalization. In particular, the chemical procedure to tether thiol bearing RGD peptide has been described. Moreover, the possibility to load and to control the release of slightly water soluble effectors has been demonstrated by using dexamethasone. First, the swelling and degradation profiles of the scaffolds have been investigated, then the evaluation of metabolic activity of bovine chondrocyt…
Supported Ionic Liquids: A Versatile and Useful Class of Materials.
2017
Supported ionic liquids (SILs) represent a class of materials with peculiar properties and a huge potential regarding their possible applications in different fields of chemistry. Herein, we report our ongoing research about the use of SILs as support for organocatalysts, their role as catalysts themselves, and their application as support and stabilizers of palladium nanoparticles (PdNPs). The use of SILs based materials allowed achieving good results. Moreover, in some cases, after the functionalization of the catalytic species with an ion-tag moiety, a release and catch approach was employed in order to improve the catalytic activity and to facilitate the recovery of the hybrid system fo…
Anodizing of aluminium and AA 2024-T3 alloy in chromic acid: Effects of sulphate on film growth
2017
Chromic acid anodizing is important for the corrosion protection of aerospace aluminium alloys. Previous study has demonstrated that SO42 − impurity in the chromic acid affects the film growth on aluminium at a voltage of 100 V. The present work further investigates aluminium and extends the study to industrial anodizing conditions (Bengough-Stuart (B-S) process) and to the AA 2024-T3 alloy. It is shown that SO42 − concentrations between ~ 38–300 ppm reduce the film growth rate for aluminium anodized at 100 V in comparison with an electrolyte than contains ≤ 1.5 ppm SO42 −, whereas ~ 1500–3000 ppm SO42 have an opposite effect and lead to an unstable pore diameter. Under the B-S process, the…