Search results for " PROJECT"
showing 10 items of 1296 documents
U.I.R.D.A. – Unbuilt Italian Rationalism Digital Archive
2018
For twenty years, the architecture of Italian rationalism through the digital modelling has been investigated. Very often, the production of a model and the consequent representation of tridimensional views, in many case studies, as outcome of the research on architecture have been considered. Actually, the digital model, intended as a critical tool, has to be conceived as a ‘starting point' for graphic analysis of architecture and not as the outcome. Indeed, it is associated to other graphics, sometimes not ‘deducted' from the model, useful for the understanding/translation of architecture. The construction of the model is not the construction of a simple image, operation, which is often c…
Lean design improves both health-care facilities and processes: a literature review
2014
This article presents a literature review of the challenges and possibilities for Lean design in modern health-care facilities. Many of today's health-care facilities are in dire need of renovation since limited financial resources among health-care demand improved work process efficiency, safety and employee well-being. Lean philosophy has been successfully implemented into hospitals with up-and-running hospital processes, but has not been thoroughly tested as a design methodology. The principles of Lean do not contradict with user-centric, participatory or ergonomic design approaches and thus the possibilities of using Lean as a complementary design methodology to the aforementioned appro…
Design and characterization of the SiPM tracking system of NEXT-DEMO, a demonstrator prototype of the NEXT-100 experiment
2013
NEXT-100 experiment aims at searching the neutrinoless double-beta decay of the Xe-136 isotope using a TPC filled with a 100 kg of high-pressure gaseous xenon, with 90% isotopic enrichment. The experiment will take place at the Laboratorio Subterraneo de Canfranc (LSC), Spain. NEXT-100 uses electroluminescence (EL) technology for energy measurement with a resolution better than 1% FWHM. The gaseous xenon in the TPC additionally allows the tracks of the two beta particles to be recorded, which are expected to have a length of up to 30 cm at 10 bar pressure. The ability to record the topological signature of the beta beta 0 nu events provides a powerful background rejection factor for the bet…
Description and commissioning of NEXT-MM prototype: first results from operation in a Xenon-Trimethylamine gas mixture
2014
[EN] A technical description of NEXT-MM and its commissioning and first performance is reported. Having an active volume of ∼35 cm drift × 28 cm diameter, it constitutes the largest Micromegas-read TPC operated in Xenon ever constructed, made by a sectorial arrangement of the 4 largest single wafers manufactured with the Microbulk technique to date. It is equipped with a suitably pixelized readout and with a sufficiently large sensitive volume (∼23 l) so as to contain long (∼20 cm) electron tracks. First results obtained at 1 bar for Xenon and Trymethylamine (Xe-(2%)TMA) mixture are presented. The TPC can accurately reconstruct extended background tracks. An encouraging fu…
Exposure and risk assessment to arsenic species in Spanish children using biomonitoring
2018
We present a new approach to arsenic (As) risk assessment using biomonitoring. In this pilot study we determined the levels of total and speciated urinary arsenicin 109 Spanish school children aged between 6 and 11 years, and interpreted these concentrations in a risk assessment context. The geometric mean (GM) for total As (TAs) was 33.82 mu/L. The order of occurrence and average concentrations of the different species was arsenobetaine (AsB) (100%, 15 mu g/L), dimethylarsinic (DMA) (97%, 8.32 mu g/L), monomethylarsonic (MMA) (26%, 027 mu g/L) and inorganic As (iAs) (4%, 0.14 mu g/L). 18% of children presented exposures to inorganic arsenic (7.52 mu g/g creatinine) higher than guidance val…
The role of EPS concentration in MBR foaming: analysis of a submerged pilot plant.
2010
Foaming in Membrane BioReactor (MBR) is a frequently discussed topic. Some authors reported that the phenomenon is due to filamentous organisms, like at Conventional Activated Sludge (CAS) plants. However, in recent years, other authors reported that the Extra-cellular Polymer Substances (EPSs) concentration is an important factor for controlling foam as well. Nevertheless, even if a number of MBR plants are affected by foaming, presently there are no suitable methods to evaluate the phenomenon. To facilitate the study of this controversial phenomenon in an MBR system, certain foam tests proposed in the past for CASPs were investigated. The results of the tests were able to adequately measu…
Low cost-sensors as a real alternative to on-line nitrogen analysers in continuous systems.
2009
This paper is focused on the evaluation of the applicability of low-cost sensors (pH and ORP) versus nutrient analysers for controlling biological nitrogen removal in WWTPs. A nutrient removal pilot plant located in Carraixet WWTP (Valencia, Spain) that is equipped with a significant number of nutrient analysers and low-cost sensors was used. The relations between reliable, cheap on-line sensors such as pH and ORP (located in anaerobic, anoxic and aerobic zones) and the nitrification/denitrification processes are provided. The nitrification process can be evaluated by measuring the pH difference between the first and last aerobic zones. The denitrification process can be evaluated by measur…
Nitrous oxide from moving bed based integrated fixed film activated sludge membrane bioreactors
2017
Abstract The present paper reports the results of a nitrous oxide (N 2 O) production investigation in a moving bed based integrated fixed film activated sludge (IFAS) membrane bioreactor (MBR) pilot plant designed in accordance with the University of Cape Town layout for biological phosphorous removal. Gaseous and liquid samples were collected in order to measure the gaseous as well as the dissolved concentration of N 2 O. Furthermore, the gas flow rate from each reactor was measured and the gas flux was estimated. The results confirmed that the anoxic reactor represents the main source of nitrous oxide production. A significant production of N 2 O was, however, also found in the anaerobic …
Hydrogen sulfide and odor removal by field-scale biotrickling filters: Influence of seasonal variations of load and temperature
2012
Two biotrickling filters were set up at two wastewater treatment plants (WWTP) in The Netherlands to investigate their effectiveness for treatment of odorous waste gases from different sources. One biotrickling filter was installed at Nieuwe Waterweg WWTP in Hook of Holland to study the hydrogen sulfide removal from headworks waste air. The other reactor was installed at Harnaschpolder WWTP (treating wastewater of the city of The Hague) to remove mercaptans and other organic compounds (odor) coming from the emissions of the anaerobic tanks of the biological nutrient removal (BNR) activated sludge. The performance of both units showed a stable and highly efficient operation under seasonal va…
Effect of pH, substrate and free nitrous acid concentrations on ammonium oxidation rate.
2012
Respirometric techniques have been used to determine the effect of pH, free nitrous acid (FNA) and substrate concentration on the activity of the ammonium oxidizing bacteria (AOB) present in an activated sludge reactor. With this aim, bacterial activity has been measured at different pH values (ranging from 6.2 to 9.7), total ammonium nitrogen concentrations (ranging from 0.1 to 10 mg TAN L-1) and total nitrite concentrations (ranging from 3 to 43 mg NO2-N L-1). According to the results obtained, the most appropriate kinetic expression for the growth of AOB in activated sludge reactors has been established. Substrate half saturation constant and FNA and pH inhibition constants have been obt…