Search results for " Plastics"
showing 10 items of 2628 documents
Cyclodextrin–calixarene co-polymers as a new class of nanosponges
2014
Hyper-reticulated co-polymers jointly formed by cyclodextrin and calixarene units, which can be considered as a new class of nanosponges, were easily obtained by means of a click chemistry approach. In particular, we succeeded in preparing our materials by exploiting the copper-catalyzed 1,3-dipolar cycloaddition (CuAAC) reaction between heptakis-(6-deoxy)-(6-azido)-beta-cyclodextrin and (5,11,17,23-tetra-tert-butyl)-(25,26,27,28-tetra-propargyloxy)-calix-[4]-arene, mixed in different proportions. These materials were fully characterized by means of combined FT-IR, thermogravimetric, C-13 {H-1} CP-MAS NMR and nitrogen adsorption/desorption techniques. In particular, C-13 {H-1} CP-MAS spectr…
Synthesis and characterization of bisulfonated poly(vinyl alcohol)/graphene oxide composite membranes with improved proton exchange capabilities
2020
Abstract Composite membranes based on poly(vinyl alcohol) (PVA) and graphene oxide (GO) were prepared by solution-casting method to be used as proton exchange membranes (PEMs) in fuel cell (FC) applications. Bisulfonation was employed as a strategy to enhance the proton conductivity of these membranes. First, a direct sulfonation of the polymer matrix was accomplished by intra-sulfonation of the polymer matrix with propane sultone, followed by the inter-sulfonation of the polymer chains using sulfosuccinic acid (SSA) as a crosslinking agent. Furthermore, the addition of graphene oxide (GO) as inorganic filler was also evaluated to enhance the proton-conducting of the composite membranes. Th…
Accelerated ageing due to moisture absorption of thermally cured epoxy resin/polyethersulphone blends. Thermal, mechanical and morphological behaviour
2011
Abstract A model epoxy resin/anhydride system, modified with a polyethersulfone (PES) engineering thermoplastic toughening agent, has been studied under hydrothermal ageing in order to investigate the modification of the thermal, morphological and mechanical behaviour through dynamical mechanical thermal analysis, SEM microscopy and fracture toughness test respectively. Two different concentrations of the toughening agent were used in the blends and two ageing conditions have been considered, consisting of the immersion of the samples in distilled water at constant temperature of 70 °C for 1 week and for 1 month. Dynamical mechanical thermal analysis results on hydrothermally aged materials…
Miscibility of a DGEBA Based Epoxy Resin Blended with Thermoplastic Mixtures of Poly(styrene) and Block Copolymers: Influence of the Copolymer Conten…
2008
The miscibility and phase behavior of ternary systems formed by a DGEBA based epoxy resin, polystyrene (PS), and diblock copolymers has been investigated through phase diagrams experimentally obtai...
Nonisothermal elongational behavior of blends with liquid crystalline polymers
1994
Measurements of melt strength and breaking stretching ratio of several blends of thermoplastic polymers with liquid crystalline polymers are presented. The melt strength behavior depends not only on the viscosity of the blends but also on the temperature dependence of the viscosity. In particular, even if the viscosities of the blends are, at the extrusion temperature, lower than that of the thermoplastic matrices, the melt strength can be larger than that of the pure thermoplastics if its viscosity-temperature curve exceeds that of the matrices far from the solidification temperature. This behavior allows one to spin or film blow these blends despite the low viscosity.
Shear flow characterization of blends containing liquid crystal polymers
1992
A simple phenomenological approach is proposed in order to predict the presence of minima in the viscosity-composition curves of blends of thermoplastic with liquid crystal polymer (LCP). When the viscosity of the liquid crystal polymer is larger than that of the thermoplastic matrix, a minimum is observed. A possible explanation of the presence of yield stress in the flow curves of these blends is also given.
Gamma radiation of EVA-AA/MMA swollen systems to obtain mechanically improved blends
2002
In this work a "new" way to obtain "compatibilised" blends of rubber-glassy thermoplastic components is presented. Polyethylen-vinyl acetate acrylic acid terpolymer is swollen by methylmetacrylate and the system is irradiated through gamma rays in order to induce polymerisation of the monomer. Solubility and dynamic mechanical tests indicate the formation of a two phase system, even though in presence of strong interactions between the two components. Mechanical tensile behaviour is that of a ductile material with appreciable modulus values.
Thermal properties of e-beam cured epoxy/thermoplastic matrices for advanced composite materials
2007
The aim of this work is to investigate the possibility to improve the thermal behaviour of epoxy based systems, cured by ionizing radiation, in order to produce matrices for advanced carbon fibres composites. Blends of two epoxy monomers, difunctional and trifunctional, have been polymerized by e-beam irradiation and the dynamic mechanical thermal properties have been investigated. The increase of the concentration of the trifunctional epoxy monomer in the blend causes a marked increase of the Tg, but strongly decreases the reactivity. Subsequently, blends of the same epoxy monomers with a high Tg thermoplastic toughening agent have been considered and their reactivity and the thermal prope…
Synthesis of reactive hyperbranched and star-like polyethers and their use for toughening of vinylester–urethane hybrid resins
2004
A vinylester – urethane hybrid resin (VEUH) was toughened by adding various vinyl-functionalized branched polyethers in 10 and 20 wt%. Two sets of hyperbranched polymers (HBPs) with different branching density were compared with a set of six-arm star polymers. Besides the architecture, the polymers also varied in their characteristics (molecular mass and mass distribution, vinyl/hydroxy ratio). The morphology of the modified VEUH was studied by dynamic-mechanical thermal analysis (DMTA), transmission (TEM) and scanning electron microscopy (SEM). The toughness was characterized by the fracture energy ðGcÞ determined on compact tension specimens at room temperature. It was established that th…
Effects of organoclay on morphology and properties of nanocomposites based on LDPE/PA-6 blends without and with SEBS-g-MA compatibilizer
2009
LDPE/PA-6 blends (75/25 wt/wt) were added with SEBS-g-MA (S) and/or an organoclay (20A) using different compounding sequences and the morphology and the properties of the blends or composites were investigated. An XRD study of the nanocomposites with pure polymers showed that 20A is intercalated by LDPE or PA-6 chains, whereas it is exfoliated by S if the clay concentration does not exceed 10 wt%. The SEM investigation showed that both S and 20A behave as efficient emulsifying agents for the LDPE/PA-6 blends. However, their effect on the mechanical properties was found to be opposite: S enhanced toughness but lowered the stiffness, whereas 20A improved the elastic modulus but impaired the i…