Search results for " Reference"
showing 10 items of 380 documents
Syntactic complexity in Finnish-background EFL learners’ writing at CEFR levels A1–B2
2022
Eurooppalaisen viitekehyksen (EVK) merkitys kielikoulutukselle on lisännyt tutkimusta sen taitotasojen kielellisistä piirteistä; tarkempi tieto näistä piirteistä auttaisi EVK:n soveltamista opetusmateriaalien, kurssien ja arviointin laatimiseen. Tutkimuksessa selvitettiin eroavatko EVK:n tasot toisistaan syntaksin kompleksisuuden perusteella. Suomalaiset 14- ja 17-vuotiaat englannin oppijat (N=379) kirjoittivat kolme kirjoitelmaa, jotka arvioitiin EVK:n taitotasoille. Arviointiaineisto tutkittiin monitahoisella Rasch-analyysillä ja tekstien piirteet selvitettiin automaattisilla analyysiohjelmilla. Tuloksien perusteella alimpia EVK-tasoja (A1–A2) erotti selvimmin toisistaan lauseiden ja T-yk…
Integration of finite displacement interface element in reference and current configurations
2017
In the present paper the non-linear behaviour of a solid body with embedded cohesive interfaces is examined in a finite displacements context. The principal target is the formulation of a two dimensional interface finite element which is referred to a local reference frame, defined by normal and tangential unit vectors to the interface middle surface. All the geometric operators, such as the interface elongation and the reference frame, are computed as function of the actual nodal displacements. The constitutive cohesive law is defined in terms of Helmholtz free energy for unit undeformed interface surface and, in order to obtain the same nodal force vector and stiffness matrix by the two i…
Analyser of chromium and/or cobalt
2003
Abstract Two stopped-flow manifolds have been proposed for individual or simultaneous determination of chromium and cobalt in water samples. Automated procedures based on multicommutation systems have emphasised the differences of their catalytic effect in luminol–hydrogen peroxide chemiluminescence reaction. A more rapid decay of signal was observed for Co for both configurations (flow injection or continuous injection). The influence of chemical and hydrodynamic variables has been studied in order to establish the robustness of method. The analysis rate was lower 1.5 min per replicate. Chemometric tools have been employed for the resolution of their contributions. Partial least squares (P…
Analysis of drugs including illicit and new psychoactive substances in oral fluids by gas chromatography-drift tube ion mobility spectrometry
2021
Abstract In this study, a gas chromatograph (GC) has been coupled to a drift tube ion mobility spectrometer (IMS) in order to develop an analytical procedure for the determination of psychoactive substances in oral fluids. Working parameters, including the GC-IMS interface ones, were adjusted in order to obtain sensitive and robust signals. A volume of 500 μL of oral fluid was extracted with 250 μL chloroform and, after centrifugation, were injected into the GC-IMS system. Amphetamine, methylone, α-PVP, ketamine, lidocaine, MPHP, cocaine, THJ-2201, and 5F-ADB were employed as model compounds, providing limits of detection from 6 to 15 μg L−1 and recoveries from 70 to 115% for field oral flu…
Flow injection flame atomic absorption analysis of Fe and Mn in cement samples
1993
A new procedure has been developed for the determination of Fe and Mn in cements. It consists in dispersing 50 mg of the solid sample in 25 ml of 0.15 mol/l HNO3 and 0.12 mol/l HCl solution. Acid slurries are heated at 50°C for 10 min and then different volumes of the slurry are injected into a water carrier stream. This previous acid treatment leaches the elements to be determined and permits the use of acid solutions as standards. For the Mn determination, the use of a single line flow injection manifold provides a limit of detection of 0.03 mgl−1 and a dynamic range up to 6 mgl−1. For the determination of Fe, the on-line dispersion of samples, using a well stirred mixing chamber, increas…
Determination of chromium(III) and chromium(VI) in mineral water by bidirectional electrostacking and electrothermal atomic absorption spectrometry
2001
Abstract A feasibility investigation was carried out on the use of bidirectional electrostacking for simultaneous separation and pre-concentration of Cr(III) and Cr(VI) and their electrothermal atomic absorption spectrometry (ETAAS) determination. The bidirectional electrostacking manifold was improved, and the effects of sample tube cross-section and electrostacking time on the pre-concentration factor were investigated. Results indicate that the sample tube cross-section and electrostacking time are the main influence factors on the electrostacking pre-concentration, as well as the electric field strength and ionic mobility. The method developed was suitable for the simultaneous separatio…
Comparative evaluation of liquid chromatography versus gas chromatography using a β-cyclodextrin stationary phase for the determination of BTEX in oc…
2009
An HPLC method for the determination of benzene, toluene, ethylbenzene and o-xylene, m-xylene and p-xylene in occupational environments was developed and compared with a GC-MS method. Chromatographic analysis using a beta-cyclodextrin stationary phase was performed after active and passive air sampling by adsorption on activated charcoal and pressurized fluid extraction. The analytes were completely separated and quantified using both methods, although GC-MS provided better resolutions and lower detection limits than HPLC. The HPLC method was unsuccessfully applied to the determination of benzene in real samples because its sensitivity was too low. Both methods were applied to the analysis …
Determination of arsenite, arsenate, monomethylarsonic acid and dimethylarsinic acid in cereals by hydride generation atomic fluorescence spectrometry
2007
Abstract A fast, sensitive and simple non-chromatographic analytical method was developed for the speciation analysis of toxic arsenic species in cereal samples, namely rice and wheat semolina. An ultrasound-assisted extraction of the toxic arsenic species was performed with 1 mol L− 1 H3PO4 and 0.1% (m/v) Triton XT-114. After extraction, As(III), As(V), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) concentrations were determined by hydride generation atomic fluorescence spectrometry using a series of proportional equations corresponding to four different experimental reduction conditions. The detection limits of the method were 1.3, 0.9, 1.5 and 0.6 ng g− 1 for As(III), As(V)…
On-line speciation of mercury in fish by cold vapour atomic fluorescence through ultrasound-assisted extraction
2004
A fully mechanized procedure has been developed for the speciation of mercury in fish samples by using cold vapour atomic fluorescence spectrometry (CV-AFS). Sample slurries in an acid mixture in the presence of a surfactant and with traces of K2Cr2O7, were injected into a flow system, sonicated and merged with 1 ml of an oxidant mixture of KBr/KBrO3 heated at 50 °C in a water bath and total Hg determined by CV-AFS. Sonicated sample slurries were also measured, in the absence of KBr/KBrO3, in order to obtain a second series of data which could be employed to establish the concentrations of free Hg(II). Different compositions of the acidic extractant solutions were evaluated by mixing HCl, H…
Validation of Powder X-Ray Diffraction Following EN ISO/IEC 17025
2012
: Powder X-ray diffraction (PXRD) is used widely in forensic science laboratories with the main focus of qualitative phase identification. Little is found in literature referring to the topic of validation of PXRD in the field of forensic sciences. According to EN ISO/IEC 17025, the method has to be tested for several parameters. Trueness, specificity, and selectivity of PXRD were tested using certified reference materials or a combination thereof. All three tested parameters showed the secure performance of the method. Sample preparation errors were simulated to evaluate the robustness of the method. These errors were either easily detected by the operator or nonsignificant for phase iden…