Search results for " Solar cell"
showing 10 items of 309 documents
Donor/acceptor heterojunction organic solar cells
2017
Organic solar cells (OSCs) have made very good improvements in recent years, reaching power conversion efficiencies above 10% [1]. This have been achieved through chemical synthesis of new organic materials with improved properties and also by new and more or less complex structures such as donor/acceptor (D/A) or bulk heterojunction OSCs. Here we report the results of initial development of OSCs based on the simple D/A heterojunction [2]. Copper phtalocyanine (CuPc) is used as donor organic material, whereas perylenetetracarboxylic dianhydride (PTCDA) and fullerene (C60) as acceptor organic materials. Moreover bathocuproine (BCP) is used as exciton blocking layer. Devices are fabricated by…
Non-uniform doping concentration CIGS absorber profile for highefficiency solar cells
2016
The quaternary chalcopyrite semiconductor alloy Cu(In,Ga)Se2 (CIGS) is nowadays commonly considered one of the most suitable materials to fabricate cost-effective and high-efficiency photovoltaic cells. Thanks to the optical and structural properties of the absorber layer and to the tunable bandgap, thin-film CIGS cells have reached efficiencies around 20%, not far from the maximum values of traditional crystalline silicon cells. This high efficiency, together with the conceivable low fabrication costs, makes CIGS cells a promising alternative to silicon technology for large-scale production. In order to further improve the cells performance, in a previous work we have already proposed a si…
Electrical characterization of high-efficiency bifacial silicon solar cells
2018
This work presents a preliminary study on the electrical characterization of high efficiency bifacial solar cells. An opening discussion on the state-of-the-art of such advanced technology is initially proposed and the experimental characterization of some prototypes is described. From this analysis, it can be stated that the bifacial silicon solar cells can be a very promising technology with high electrical performances and efficiency.
Broadband photocurrent enhancement in a-Si:H solar cells with plasmonic back reflectors
2014
The authors acknowledge Francesco Ruffino for the AFM measurements. This work was funded by the EU FP7 Marie Curie Action FP7-PEOPLE-2010-ITN through the PROPHET project (Grant No. 264687), the bilateral CNR/AVCR project "Photoresponse of nanostructures for advanced photovoltaic applications", the MIUR project Energetic (Grant no. PON02_00355_3391233) and by the Portuguese Science Foundation (FCT-MEC) through the Strategic Project PEst-C/CTM/LA0025/2013-14 and the research project PTDC/CTM-ENE/2514/2012. Plasmonic light trapping in thin film silicon solar cells is a promising route to achieve high efficiency with reduced volumes of semiconductor material. In this paper, we study the enhance…
Low-cost high-haze films based on ZnO nanorods for light scattering in thin c-Si solar cells
2015
Light scattering from ZnO nanorods (NR) is investigated, modeled, and applied to a solar cell. ZnO NR (120-1300 nm long, 280-60 nm large), grown by low-cost chemical bath deposition at 90 degrees C, exhibit diffused-to-total transmitted light as high as 70% and 30% in the 400 and 1000 nm wavelength range, respectively. Data and scattering simulation show that ZnO NR length plays a crucial role in light diffusion effect. A transparent ZnO NR film grown on glass and placed on top of a 1 mu m thick c-Si solar cell is shown to enhance the light-current conversion efficiency for wavelengths longer than 600 nm. (C) 2015 AIP Publishing LLC.
The origin of slow electron recombination processes in dye-sensitized solar cells with alumina barrier coatings
2004
We investigate the effect of a thin alumina coating of nanocrystalline TiO2 films on recombination dynamics of dye-sensitized solar cells. Both coated and uncoated cells were measured by a combination of techniques: transient absorption spectroscopy, electrochemical impedance spectroscopy, and open-circuit voltage decay. It is found that the alumina barrier reduces the recombination of photoinjected electrons to both dye cations and the oxidized redox couple. It is proposed that this observed retardation can be attributed primarily to two effects: almost complete passivation of surface trap states in TiO2 that are able to inject electrons to acceptor species, and slowing down by a factor of…
Improving Perovskite Solar Cells: Insights From a Validated Device Model
2017
To improve the efficiency of existing perovskite solar cells (PSCs), a detailed understanding of the underlying device physics during their operation is essential. Here, a device model has been developed and validated that describes the operation of PSCs and quantitatively explains the role of contacts, the electron and hole transport layers, charge generation, drift and diffusion of charge carriers and recombination. The simulation to the experimental data of vacuum-deposited CH3NH3PbI3 solar cells over multiple thicknesses has been fit and the device behavior under different operating conditions has been studied to delineate the influence of the external bias, charge-carrier mobilities, e…
State selective electron injection in non-aggregated titanium phthalocyanine sensitised nanocrystalline TiO2 films
2004
We describe a novel titanium phthalocyanine that shows no aggregation when anchored to nanocrystalline TiO2 films through its axial carboxylated ligand without the use of co-adsorbents; state selective electron injection into the TiO2 is demonstrated, resulting in efficient photocurrent generation in dye sensitised photoelectrochemical solar cells. Palomares Gil, Emilio J, epagil@alumni.uv.es
Empowering Photovoltaics with Smart Light Management Technologies
2021
The daily Sun supplies the continents of the Earth with four times more energy than humanity consumes in a year. This enormous potential of solar energy to generate clean energy is therefore driving great efforts to replace conventional and unsustainable fossil fuel consumption that damages our climate and our environment. Solar photovoltaic (PV) is emerging as the fastest growing renewable energy technology in the world, yet its share to the electricity production currently is less than 3%. While coal and gas remain key to electricity production, the climate crisis demands a fast transition to a carbon-neutral energy system. In the year 2019, the PV industry produced solar panels with a ca…
Acid versus base peptization of mesoporous nanocrystalline TiO2 films: functional studies in dye sensitized solar cells
2005
We report an analysis of the influence of acid/base conditions employed in the synthesis of TiO2 nanoparticles upon the performance of dye sensitised photoelectrochemical solar cells fabricated from these particles. The functional properties of the TiO2 nanoparticles in these devices are investigated by potential step chronoamperometry, transient laser spectroscopy, and photovoltaic device characterisation. We find that base peptization conditions employed in the sol–gel fabrication of the TiO2 nanoparticles result in a reduction in film electron density under negative applied bias, correlated with slower interfacial recombination losses and a higher device open circuit voltage.