Search results for " Spectra"
showing 10 items of 709 documents
Modelling and analysis of the influence of solar spectrum on the efficiency of photovoltaic modules
2021
Abstract The article presents the influence of changes in the solar radiation spectrum distribution on the properties of various photovoltaic modules, with particular emphasis on the scattered component. We compared the relative efficiency of the photovoltaic modules based on various semiconductor absorbers during bright and sunny, and cloudy summer days. Additionally, we presented the impact of the module tilt angle on the magnitude of the surface incident scattered component and on the efficiency of the module. The solar spectra for various weather conditions were estimated using specialised computer programmes,such as SolarSpectrum or SMARTS2, and we present here the validation results f…
Ultralow chirp photonic crystal fiber Mach-Zehnder interferometer
2018
A photonic crystal fiber Mach-Zehnder interferometer design was optimized to obtain high performance and ultralow chirp. Two long-period gratings were used to excite the cladding modes, and the rich structure of the cladding was tailored to obtain a slightly chirped free spectral range, as required by the Telecommunication Standardization Sector of the International Telecommunication Union (ITU-T) Norm G.694.1. Finally, a fabrication tolerance analysis was performed. The advantages of the proposed device are an ultralow chirp, high bandwidth, and fabrication robustness tolerance.
Shifting the Photoresponse of ZnO Nanowires into the Visible Spectral Range by Surface Functionalization with Tailor-Made Carbon Nanodots
2018
We report on the surface functionalization of ZnO nanowires (NWs) with specifically synthesized carbon nanodots (C-dots, CDs) that allows us to shift the photoresponse of the NWs far into the visib...
Thermal restraint of a bacterial exopolysaccharide of shallow vent origin
2018
This is the post-print version of the following article: "Thermal restraint of a bacterial exopolysaccharide of shallow vent origin", which has been published in final form at https://www.sciencedirect.com/science/article/pii/S0141813018308250?via%3Dihub; International audience; To dynamically characterize the thermal properties of the fructose-rich exopolysaccharide (EPS1-T14), produced by themarine thermophilic Bacillus licheniformis T14, the Attenuated Total Reflectance Fourier Transform Infra-Redspectroscopy was coupled to variable temperature ranging from ambient to 80 °C.The spectra were analyzed by the following innovative mathematical tools: i) non-ideal spectral deviation, ii) OHst…
Clinical measurements analysis of multi-spectral photoplethysmograph biosensors
2014
The developed portable multi-spectral photoplethysmograph (MS-PPG) optical biosensor device, intended for analysis of peripheral blood volume pulsations at different vascular depths, has been clinically verified. Multi-spectral monitoring was performed by means of a four – wavelengths (454 nm, 519 nm, 632 nm and 888 nm) light emitted diodes and photodiode with multi-channel signal output processing. Two such sensors can be operated in parallel and imposed on the patient’s skin. The clinical measurements confirmed ability to detect PPG signals at four wavelengths simultaneously and to record temporal differences in the signal shapes (corresponding to different penetration depths) in normal a…
Clinical measurements with multi-spectral photoplethysmography sensors
2012
A portable multi-spectral photoplethysmography device has been used for studies of 40 subjects. Multi-spectral monitoring was performed by means of a four - wavelengths (465 nm, 530 nm, 630 nm and 870 nm) light emitted diodes (LED) and a single photodiode with multi-channel signal output processing. The proposed methodology and potential clinical applications are discussed.
Broadband Fabry–Pérot Resonator From Zerodur for Laser Stabilisation Below 1KHZ Linewidth With < 100 HZ/S Drift and Reduced Sensitivity to Vibrati…
2015
Abstract Here we demonstrate the results of creating a two-mirror Fabry-Pérot resonator (FPR) that allows achieving the spectral width of a stabilised laser line below 1 kHz. It had low expansion Zerodur spacer and broadband high reflectance mirrors (99.85% in the range of 630 to 1140 nm). FPR was vertically mid-plane mounted for reduced sensitivity to vibrations and included in two shields inside a vacuum chamber to lower temperature fluctuations. Peltier element was used for temperature stabilisation at zero-expansion temperature. Pound-Drever-Hall (PDH) technique was applied. The signal from FPR was compared to ultra-stable signal (of about 1 Hz linewidth) to form a beat note signal. For…
Photonic crystals based on two-layer opaline heterostructures
2002
AbstractOptical properties of several heterostructures representing two-layer opaline photonic crystals have been examined. Two separate stop-bands have been observed both in transmission and emission spectra. The effect of the interface disorder on the optical spectra was not observed, probably, due to the insufficient degree of order of the opaline layers.
A Simple Model for Ac Impedance Spectra in Bipolar Membranes
1996
A new model accounting for the ac impedance spectra of synthetic ion-exchange bipolar membranes is presented. The theoretical approach is based on the Nernst−Planck and Poisson equations and applies some of the concepts used in the semiconductor pn junctions to the case of a bipolar membrane. The results presented are the current−voltage curves and the impedance spectra at electric currents above the limiting current. It is shown that the model is able to identify the main contributions to the bipolar membrane impedance and gives valuable information about the bipolar junction structure and its influence on the characteristic parameters involved in the field-enhanced water dissociation phen…
On the Accuracy and Efficiency of Transient Spectral Element Models for Seismic Wave Problems
2016
This study concentrates on transient multiphysical wave problems for simulating seismic waves. The presented models cover the coupling between elastic wave equations in solid structures and acoustic wave equations in fluids. We focus especially on the accuracy and efficiency of the numerical solution based on higher-order discretizations. The spatial discretization is performed by the spectral element method. For time discretization we compare three different schemes. The efficiency of the higher-order time discretization schemes depends on several factors which we discuss by presenting numerical experiments with the fourth-order Runge-Kutta and the fourth-order Adams-Bashforth time-steppin…