Search results for " composites"

showing 10 items of 1620 documents

Benchmarking of strength models for unidirectional composites under longitudinal tension

2018

© 2018 Elsevier Ltd Several modelling approaches are available in the literature to predict longitudinal tensile failure of fibre-reinforced polymers. However, a systematic, blind and unbiased comparison between the predictions from the different models and against experimental data has never been performed. This paper presents a benchmarking exercise performed for three different models from the literature: (i) an analytical hierarchical scaling law for composite fibre bundles, (ii) direct numerical simulations of composite fibre bundles, and (iii) a multiscale finite-element simulation method. The results show that there are significant discrepancies between the predictions of the differe…

TechnologyMaterials scienceComposite numberMaterials Science02 engineering and technologyFiber-reinforced composite0901 Aerospace EngineeringEngineering0203 mechanical engineeringFragmentationUltimate tensile strengthMicro-mechanicsCOMPUTED-TOMOGRAPHYLOAD-TRANSFERComposite material0912 Materials EngineeringMaterialsStress concentrationEPOXY COMPOSITESTRESS-CONCENTRATIONSScience & TechnologyDAMAGE ACCUMULATIONTension (physics)FIBER-REINFORCED COMPOSITESPolymer-matrix compositesExperimental dataMicromechanics021001 nanoscience & nanotechnologyFinite element methodEngineering Manufacturing020303 mechanical engineering & transportsWIDE FAILURE EXERCISEMechanics of MaterialsMaterials Science CompositesHYBRID COMPOSITES[PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Ceramics and CompositesStrength0210 nano-technologyFINITE-ELEMENT0913 Mechanical Engineering
researchProduct

Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

2022

The resistance of wear protective coatings against oxidation is crucial for their use at high temperatures. Here, three nanocomposite AlCr(Si)N coatings with a fixed Al/Cr atomic ratio of 70/30 and a varying Si-content of 0 at.%, 2.5 at.% and 5 at.% were analyzed by differential scanning calorimetry, thermogravimetric analysis and X-ray in order to understand the oxidation behavior depending on their Si-content. Additionally, a partially oxidized AlCrSiN coating with 5 at.% Si on a sapphire substrate was studied across the coating thickness by depth-resolved cross-sectional X-ray nanodiffraction and scanning trans-mission electron microscopy to investigate the elemental composition, morphol…

TechnologyThermogravimetric analysisSTRESSMaterials sciencePolymers and PlasticsAnnealing (metallurgy)Materials SciencenanomateriaalitOxideTHERMAL-STABILITYMaterials Science Multidisciplinaryengineering.materialoxidation behaviourchemistry.chemical_compoundDifferential scanning calorimetryCoatingResidual stressMaterials ChemistrykomposiititpinnoitteetScience & TechnologyAlCrSiNNanocompositenanocompositeMechanical EngineeringhapettuminenMetals and AlloysMECHANICAL-PROPERTIESEVOLUTIONcross-sectional X-ray nanodiffractionALChemical engineeringchemistryMechanics of MaterialsCeramics and CompositesengineeringMetallurgy & Metallurgical EngineeringAtomic ratioALCRN COATINGSRESISTANCEBEHAVIORSYSTEMNANOCOMPOSITE COATINGScathodic arcJournal of Materials Science & Technology
researchProduct

Biphasic dimerisation of methylacrylate--immobilisation and stabilisation of cationic Pd-catalysts in ionic liquids by an ammoniumphosphine ligand.

2002

The first continuous, biphasic, Pd-catalysed dimerisation of methylacrylate is described. The biphasic system has been realised by using a tetrafluoroborate ionic liquid as catalyst medium and an ammoniumphosphine ligand to immobilise and stabilise the Pd-catalyst.

TetrafluoroborateLigandInorganic chemistryMetals and AlloysCationic polymerizationGeneral ChemistryCatalysisSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsCatalysischemistry.chemical_compoundchemistryIonic liquidMaterials ChemistryCeramics and CompositesChemical communications (Cambridge, England)
researchProduct

Synthesis and Characterization of Iron-Doped ZrSiO4 Solid Solutions from Gels

2011

The mechanism of formation and the structural features of tetragonal Fe–ZrO2-amorphous silica composites and particulated Fe-doped ZrSiO4 solid solutions were studied. A series of specimens with compositions Fex–ZrSiO4, 0 ≤ x ≤ 0.10 were prepared by sol–gel techniques and thermally annealed over the range of temperature between 400°C and 1600°C. Results confirmed the formation of tetragonal Fe–ZrO2 solid solution as first crystalline phase on the whole process leading to Fe-doped ZrSiO4 solid solution. The annealing temperature for the preparation of Fe-containing ZrSiO4 solid solutions was dependent on the nominal amount of iron. The Fex–ZrSiO4 solid solutions, with 0.02 < x < 0.08, were a…

Tetragonal crystal systemLattice constantMaterials scienceIron dopedAnnealing (metallurgy)Materials ChemistryCeramics and CompositesAnalytical chemistryMineralogyDiffuse reflectionSolubilityZirconSolid solutionJournal of the American Ceramic Society
researchProduct

A 2,3-dialkoxynaphthalene-based naphthocage

2019

A 2,3-dialkoxynaphthalene-based naphthocage has been synthesized. This naphthocage prefers to bind small organic cations with its low-symmetry conformation, which is in contrast to 2,6-dialkoxynaphthalene-based naphthocages. Self-sorting of these two naphthocages with two structurally similar guests tetramethylammonium and tetraethylammonium was achieved as well. peerReviewed

TetramethylammoniumTetraethylammoniumMetals and AlloyskationitGeneral ChemistryContrast (music)Medicinal chemistryCatalysisSurfaces Coatings and FilmsElectronic Optical and Magnetic Materialschemistry.chemical_compoundchemistryMaterials ChemistryCeramics and Compositessupramolekulaarinen kemia
researchProduct

Novel method for functionalising and patterning textile composites:Liquid resin print

2016

Abstract The paper reports a novel method of integrating resin into continuous textile reinforcement. The method presents a print of liquid reactive resin into textile preforms. A series of targeted injections forms a patch which upon consolidation and curing transforms into a stiff region continuously spanning through preform thickness. Enhancing the injected resin with conductive phase allows creating a pattern of patches with controlled dimensions and added functionalities. Patterned composites reveal features which are not typical for conventional composites such as fibre bridged interfaces, regular thickness variation, and gradient matrix properties. The presented study explores the ro…

Textile reinforcementA. Multifunctional compositesMaterials sciencetechnology industry and agricultureElectrically conductiveE. 3-D printingLiquid resin02 engineering and technologyBristol Composites Institute ACCIS010402 general chemistry021001 nanoscience & nanotechnology01 natural sciencesA. Carbon nanotubes and nanofibers0104 chemical sciencesMechanics of MaterialsCeramics and CompositesSurface modificationTextile compositeComposite materialB. Electrical properties0210 nano-technology/dk/atira/pure/core/keywords/composites_SRIElectrical conductorCuring (chemistry)
researchProduct

Strength prediction of a triaxially braided composite

2011

The architecture of textile reinforcement affects the deformation and failure behavior of the textile reinforced composites. This paper presents an approximate method that incorporates the in-plane periodic meso structure of the textile composite in finite element models. In this approach, the representative unit cell (RUC) of a textile composite is divided into sub-cells. Instead of obtaining a homogeneous equivalent, these sub-cells are idealized and represented with laminates of different layups using shell elements. In this way, an RUC can be constructed with a small number of elements. This method holds the promise of creating a textile composite FE model with an improved accuracy with…

TextileMaterials scienceComputer simulationbusiness.industryBraided compositeShell (structure)ComputerApplications_COMPUTERSINOTHERSYSTEMS02 engineering and technologyStructural engineering[PHYS.MECA.MSMECA]Physics [physics]/Mechanics [physics]/Materials and structures in mechanics [physics.class-ph]021001 nanoscience & nanotechnologyFinite element methodGeneralLiterature_MISCELLANEOUS020303 mechanical engineering & transportsCompressive strength0203 mechanical engineeringMechanics of MaterialsUltimate tensile strengthCeramics and CompositesComputerSystemsOrganization_SPECIAL-PURPOSEANDAPPLICATION-BASEDSYSTEMSComposite materialDeformation (engineering)0210 nano-technologybusinessComputingMethodologies_COMPUTERGRAPHICS
researchProduct

Rapid and eco-friendly synthesis of graphene oxide-silica nanohybrids

2014

The increasing interest in Graphene oxide (GO) is due to many issues: the presence of both sp2-conjugated atoms and oxygen-containing functional groups provides a strong hydrophilicity and the possibility to further functionalize it with other molecules (i.e. π-π interactions covalent attachment etc.) [1]. Furthermore since the GO is biocompatible and noncytotoxic many studies have been recently focused on the development of GO-based nanodevices for bioimaging DNA detection drug delivery. Due to their low cytotoxicity and large internal surface area silica nanoparticles have been taken into account as promising material for biolabeling and drug loading/delivery. Particular consideration has recently been demonstrated for GO-silica composites because of the potentialities for electrical applications their chemical inertia and stability toward ions exposure. The possibility to combine the extraordinary properties of GO and silica offers several advantages for the realization of nanoprobes for biological applications and of biosensor [12]. The strategy for the fabrication of GO-nanosilica nanohybrids can be schematized as follows: (i) synthesis of GO by oxidizing graphite powder with the method described by Marcano et al. [3] (ii) Preparation of oxygen-loaded silica nanoparticles by thermal treatments in controlled atmosphere in order to induce high NIR emission at 1272 nm from high purity silica nanoparticles. (iii) preparation of GrO-silica nanohybrid films via rapid solvent casting in water. The nanohybrids were tested by XPS FTIR Raman analysis UV photoluminescence analysis TGA Zeta potential measurements electrical tests AFM and SEM. Several nanohybrids were prepared by combining two different typologies of GO and two different samples of silica.
researchProduct

Active colloidal suspensions: Clustering and phase behavior

2014

We review recent experimental, numerical, and analytical results on active suspensions of self-propelled colloidal beads moving in (quasi) two dimensions. Active colloids form part of the larger theme of active matter, which is noted for the emergence of collective dynamic phenomena away from thermal equilibrium. Both in experiments and computer simulations, a separation into dense aggregates, i.e., clusters, and a dilute gas phase has been reported even when attractive interactions and an alignment mechanism are absent. Here, we describe three experimental setups, discuss the different propelling mechanisms, and summarize the evidence for phase separation. We then compare experimental obse…

Thermal equilibriumChemistryFOS: Physical sciencesCondensed Matter - Soft Condensed MatterCondensed Matter PhysicsInstabilityElectronic Optical and Magnetic MaterialsActive matterMinimal modelCondensed Matter::Soft Condensed MatterColloidChemical physicsLow temperature combustionPhase (matter)Materials ChemistryCeramics and CompositesSoft Condensed Matter (cond-mat.soft)Statistical physicsCluster analysis
researchProduct

Aging effects in simple models for glassy relaxation

2006

Aging effects in the two-time correlation function and the response function after a quench from a high temperature to some low temperature are considered for a simple kinetic random energy model exhibiting stretched exponential relaxation. Because the system reaches thermal equilibrium for long times after the quench, all aging effect are of a transient nature. In particular, the violations of the fluctuation-dissipation theorem are considered and it is found that the relation between the response and the two-time correlation function depends on another function, the so-called asymmetry. This asymmetry vanishes in equilibrium but cannot be neglected in the aging regime. It is found that pl…

Thermal equilibriumFluctuation-dissipation theoremChemistryRandom energy modelmedia_common.quotation_subjectFOS: Physical sciencesThermodynamicsCondensed Matter - Soft Condensed MatterCondensed Matter PhysicsAsymmetryElectronic Optical and Magnetic MaterialsExponential functionCorrelation function (statistical mechanics)Materials ChemistryCeramics and CompositesSoft Condensed Matter (cond-mat.soft)Relaxation (physics)Scalingmedia_common
researchProduct