Search results for " diffraction"
showing 10 items of 896 documents
Mechanism of Formation of TiO2-Doped Mullites from Heated Single-Phase Gels Investigated by Structural and Microstructural Parameters
2008
An analysis of the microstructure of TiO 2 -doped mullites prepared from monophasic gels thermally treated in the temperature range 900°-1600°C is reported. Two series of gels with nominal compositions 3(Al 2-x Ti x O 3 ) ·2(SiO 2 ) and 2(Al 2-x Ti x O 3 )·(SiO 2 ), in the range 0≤x≤0.15, were prepared. X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) were used to follow the structural and textural evolution from gels to the final doped mullites. The crystallite sizes and microstrains were determined by linewidth refinements of XRD patterns using the integral breadth method of Langford and the Warren-Averbach analysis. XRD patterns showed the formation of Al 2 TiO 5 and…
Influence of the microstructure on the corrosion behaviour of low-carbon martensitic stainless steel after tempering treatment
2014
Abstract The microstructure of grade X4CrNiMo16.5.1 stainless steel was studied at different scales. The chemical composition of the native passive film formed on the different phases was then determined at the microscale. The degree of homogeneity of the native passive film is discussed. Subsequently, the susceptibility to pitting corrosion of X4CrNiMo16.5.1 was quantified using the electrochemical microcell technique. The nature of precursor sites and the morphology of pits were investigated by combining scanning electron microscopy with Electron BackScatter Diffraction and potentiostatic pulse tests. The role of the microstructure and the cold-worked layer generated by polishing in pitti…
Corrosion behaviour of heavily deformed pearlitic and brass-coated pearlitic steels in sodium chloride solutions
2014
Abstract The influence of plastic deformation and galvanic coupling on the microstructure and corrosion behaviour of pearlitic steel and brass-coated pearlitic steel was investigated in sodium chloride solution at 25 °C. Microstructural changes were quantified using scanning electron microscopy coupled with EBSD. Chemical and electrochemical modifications were evaluated using XPS, ZRA, the electrochemical microcell technique and the weight loss method. From these experiments, the influence of microstructural changes on the electrochemical parameters and the corrosion rate was discussed.
Hydroformylation of 1-Hexene over Rh/Nano-Oxide Catalysts
2013
The effect of nanostructured supports on the activity of Rh catalysts was studied by comparing the catalytic performance of nano- and bulk-oxide supported Rh/ZnO, Rh/SiO₂ and Rh/TiO₂ systems in 1-hexene hydroformylation. The highest activity with 100% total conversion and 96% yield of aldehydes was obtained with the Rh/nano-ZnO catalyst. The Rh/nano-ZnO catalyst was found to be more stable and active than the corresponding rhodium catalyst supported on bulk ZnO. The favorable morphology of Rh/nano-ZnO particles led to an increased metal content and an increased number of weak acid sites compared to the bulk ZnO supported catalysts. Both these factors favored the improved catalytic performan…
Data on phase and chemical compositions of black sands from “El Ostional” beach situated in Mompiche, Ecuador
2020
Abstract Data revealing the phase and chemical compositions of natural black sands from “El Ostional” beach, located in the northern Ecuadorian Pacific coast have been presented. The samples were collected from six points over the shore area of approximately 500 × 40 m2. The data on crystalline phases (iron titanium oxide, orthoclase feldspar and zircon) were determined by X-ray powder diffraction (XRPD), while semi-quantitative chemical analyses of major (Fe and Ti) and trace elements were obtained by X-ray fluorescence spectroscopy (XRF). The phase composition was verified by scanning electron microscopy (SEM), using backscattered electron (BSE) mode and energy dispersive spectroscopy (ED…
Microwave synthesis of yttria stabilized zirconia
2005
Yttria stabilised zirconia (YSZ) nanocrystals, with a mean size between 5 and 10 nm, were prepared by microwave flash synthesis. Flash synthesis was performed in alcoholic solutions of yttrium, zirconium chloride and sodium ethoxide (EtONa) using a microwave autoclave (RAMO system) specially designed by authors. Energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), BET adsorption technique, photon correlation spectroscopy (PCS) transmission and scanning electron microscopy (TEM and SEM) are used to characterized these nanoparticles. Compared with conventional synthesis, nanopowders can be produced in a short period (e.g. 10 s), both high purity and stoechiometric control a…
Nanostructured Alumina from Freeze-Dried Precursors
2010
Nanocrystalline alumina has been obtained on the 100 g scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous solutions of different aluminum-containing products, namely aluminum acetate and aluminum L-lactate. Samples prepared at different temperatures (from 873 to 1573 K in steps of 100 K) were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and surface area measurements. In the acetate case, the transformation sequence involves the formation of θ-Al 2 O 3 as an intermediate phase between γ-Al 2 O 3 and α-Al 2 O 3 , whereas this θ phase is not observed in the lactate case. TEM…
Growth, Structure, and Stability of KxWO3 Nanorods on Mica Substrate
2012
International audience; KxWO3 nanorods, interesting as gas sensors, were elaborated on mica muscovite substrate and characterized by atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and mainly transmission electron microscopy. A combination of structural analyses allowed determining the morphology of these rods, and selected area electron diffraction experiments pointed out the simultaneous presence of the exotic hexagonal and stable monoclinic phases. Moreover, the presence of potassium inside the nanorods, coming from the mica substrate, was revealed. By combining all the observations, a growth model is proposed, consisting of the stacking of two di…
Effects of irradiation damage on the back-scattering of electrons: silicon-implanted silicon
2007
Radiation damage in an (initially crystalline) silicon wafer was generated by microbeam implantation with 600 keV Si+ ions (fluence 5 x 1014 ions/cm²). To produce micro-areas with different degrees of damage, 14 implantations at different temperatures (between 23 and 225 °C) were done. The structural state of irradiated areas was characterized using Raman spectroscopy and electron back-scatter diffraction. All irradiated areas showed strong structural damage in surficial regions (estimated depth <1 μm), and at implant substrate temperatures of below 130 °C, the treatment has caused complete amorphization. Back-scattered electron (BSE) images exhibited that observed BSE intensities correlate…
Structural evolution of CO2 filled pure silica LTA zeolite under high-pressure high-temperature conditions
2017
[EN] The crystal structure of CO2-filled pure-SiO2 LTA zeolite has been studied at high pressures and temperatures using synchrotron-based X-ray powder diffraction. Its structure consists of 13 CO2 guest molecules, 12 of them accommodated in the large alpha-cages and one in the beta-cages, giving a SiO2/CO2 stoichiometric ratio smaller than 2. The structure remains stable under pressure up to 20 GPa with a slight pressure-dependent rhombohedral distortion, indicating that pressure-induced amorphization is prevented by the insertion of guest species in this open framework. The ambient temperature lattice compressibility has been determined. In situ high-pressure resistive-heating experiments…