Search results for " drive"

showing 10 items of 286 documents

Investigation of heavy ion tracks in LiF crystals by dislocation mobility method

2008

Abstract The track damage created in LiF by swift heavy ions was studied using methods of dislocation mobility and track etching. The crystals were irradiated with Bi and Pb ions of a specific energy of 11 MeV/u at fluences between 10 7 and 10 10  cm −2 . The measurements on cross-sections cleaved parallel to the irradiated surface showed continuity of the track etching for the depth up to 70% of the ion range. In deeper layers, numerous etch pits had a flat-bottomed shape indicating the discontinuities of the track structure. At this stage, a decrease of the ion-induced effect in dislocation mobility was observed. The observed reduction of the efficiency of ion tracks as obstacles for disl…

Nuclear and High Energy PhysicsCrystallographyRange (particle radiation)Materials scienceEtching (microfabrication)Ion trackTrack (disk drive)Specific energyIrradiationDislocationInstrumentationMolecular physicsIonNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Dislocation mobility study of heavy ion induced track damage in LiF crystals

2008

Track damage created in LiF crystals by swift U, Kr, Xe and Ni ions with a specific energy of 11.1 MeV/u was studied using dislocation mobility measurements, track etching, SEM, AFM and optical microscopy. The results demonstrate continuity of etching of U tracks while discontinuities of etching are observed in the case of Xe ions. The relationship between the track structure and dislocation mobility in irradiated crystals is discussed. The dislocation mobility technique can serve as a highly sensitive method for track core damage studies.

Nuclear and High Energy PhysicsMaterials science[PHYS.HEXP] Physics [physics]/High Energy Physics - Experiment [hep-ex]LiFmacromolecular substances02 engineering and technology01 natural sciencesIon tracksIonlaw.inventionPACS: 61.80.Jh; 65.72.FfCondensed Matter::Materials ScienceOptical microscopelawEtching (microfabrication)0103 physical sciences[PHYS.HEXP]Physics [physics]/High Energy Physics - Experiment [hep-ex]Specific energyInstrumentation010302 applied physicsTrack etchingIon trackTrack (disk drive)fungitechnology industry and agricultureDislocation mobility021001 nanoscience & nanotechnology[PHYS.COND.CM-MS] Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Core (optical fiber)[PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Atomic physicsDislocation0210 nano-technologyNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

Improvement in fast particle track reconstruction with robust statistics

2014

The IceCube project has transformed one cubic kilometer of deep natural Antarctic ice into a Cherenkov detector. Muon neutrinos are detected and their direction inferred by mapping the light produced by the secondary muon track inside the volume instrumented with photomultipliers. Reconstructing the muon track from the observed light is challenging due to noise, light scattering in the ice medium, and the possibility of simultaneously having multiple muons inside the detector, resulting from the large flux of cosmic ray muons. This manuscript describes work on two problems: (1) the track reconstruction problem, in which, given a set of observations, the goal is to recover the track of a muo…

Nuclear and High Energy PhysicsParticle physicsCherenkov detectorPhysics::Instrumentation and DetectorsFOS: Physical sciencesddc:500.2Neutrino telescopeTrack reconstructionlaw.inventionIceCubelawCoincidentAngular resolutionddc:530InstrumentationInstrumentation and Methods for Astrophysics (astro-ph.IM)Remote sensingIce CubePhysicsMuonTrack (disk drive)DetectorIceCube; Neutrino astrophysics; Neutrino telescope; Robust statistics; Track reconstructionRobust statisticsNeutrino astrophysicsNeutrino detectorHigh Energy Physics::ExperimentNeutrinoAstrophysics - Instrumentation and Methods for AstrophysicsNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
researchProduct

Prognostic vs predictive molecular biomarkers in colorectal cancer: is KRAS and BRAF wild type status required for anti-EGFR therapy?

2010

An important molecular target for metastatic CRC treatment is the epidermal growth factor receptor (EGFR). Many potential biomarkers predictive of response to anti-EGFR monoclonal antibodies (cetuximab and panitumumab) have been retrospectively evaluated, including EGFR activation markers and EGFR ligands activation markers. With regard to the "negative predictive factors" responsible for primary or intrinsic resistance to anti-EGFR antibodies a lot of data are now available. Among these, KRAS mutations have emerged as a major predictor of resistance to panitumumab or cetuximab in the clinical setting and several studies of patients receiving first and subsequent lines of treatment have sho…

OncologyColorectal cancerSettore MED/06 - Oncologia MedicaCetuximabDrug resistancemedicine.disease_causeEpidermal growth factor receptorEGFR; KRAS; Driver mutations; Monoclonal antibodiesCetuximabbiologyPanitumumabAntibodies MonoclonalGeneral MedicinePrognosisAntibodies Anti-IdiotypicErbB ReceptorsGene Expression Regulation NeoplasticOncologyMonoclonalKRASColorectal Neoplasmsmedicine.drugProto-Oncogene Proteins B-rafmedicine.medical_specialtymedicine.drug_classEGFRMonoclonal antibodyAntibodies Monoclonal HumanizedProto-Oncogene Proteins p21(ras)Predictive Value of TestsInternal medicineProto-Oncogene ProteinsmedicineBiomarkers TumorKRASPanitumumabHumansRadiology Nuclear Medicine and imagingneoplasmsbusiness.industryPTEN PhosphohydrolaseMembrane ProteinsDriver mutationmedicine.diseasedigestive system diseasesDrug Resistance NeoplasmMutationCancer researchbiology.proteinras ProteinsMonoclonal antibodiesbusiness
researchProduct

Semantics driven interaction using natural language in students tutoring

2007

The aim of this work is to introduce a semantic integration between an ontology and a chatbot in an Intelligent Tutoring Systems (ITS) to interact with students using natural language. The interaction process is driven by the use of a purposely defined ontology. In the ontology two types of conceptual relations are defined. Besides the usual relations, which are used to define the domain's structure, another type of relation is used to define the navigation schema inside the ontology according to the need of managing uncertainty. Uncertainty level is related to student knowledge level about the involved concepts. In this work we propose an ITS for the Java programming language called TutorJ…

Ontology Inference LayerComputer sciencecomputer.internet_protocolOntology (information science)Semanticscomputer.software_genreOWL-SIntelligent tutoring systemsLatent semantic analysisNatural language dialogueSemantic driven interactionSemantic navigationSemantic similaritySemantic computingSchema (psychology)Upper ontologySemantic integrationSemantic compressionSettore ING-INF/05 - Sistemi Di Elaborazione Delle Informazionisemantic navigationLatent semantic analysisbusiness.industryOntology-based data integrationKnowledge levelIntelligent Tutoring SystemsOntologylatent semantic analysisArtificial intelligencesemantic driven interactionbusinesscomputernatural language dialogueNatural language processing
researchProduct

A fast algorithm for muon track reconstruction and its application to the ANTARES neutrino telescope.

2011

An algorithm is presented, that provides a fast and robust reconstruction of neutrino induced upward-going muons and a discrimination of these events from downward-going atmospheric muon background in data collected by the ANTARES neutrino telescope. The algorithm consists of a hit merging and hit selection procedure followed by fitting steps for a track hypothesis and a point-like light source. It is particularly well-suited for real time applications such as online monitoring and fast triggering of optical follow-up observations for multi-messenger studies. The performance of the algorithm is evaluated with Monte Carlo simulations and various distributions are compared with that obtained …

Optical telescopesAMANDASelection proceduresRobust reconstructionMonte Carlo methodAtmospheric muonsReal-time applicationNeutrino telescope01 natural sciencesHigh Energy Physics - ExperimentFast algorithmsHigh Energy Physics - Experiment (hep-ex)High Energy Astrophysical Phenomena (astro-ph.HE)PhysicsDetectorMonte Carlo SimulationMonte Carlo methodsComputer simulationLIGHTddc:540Física nuclearNeutrinoAstrophysics - Instrumentation and Methods for AstrophysicsAstrophysics - High Energy Astrophysical PhenomenaAlgorithmAlgorithmsFLUXOnline monitoring[PHYS.ASTR.IM]Physics [physics]/Astrophysics [astro-ph]/Instrumentation and Methods for Astrophysic [astro-ph.IM]Astrophysics::High Energy Astrophysical PhenomenaNeutrino telescopeFOS: Physical sciencesTrack reconstructionOptical telescopeNuclear physicsMuon tracks0103 physical sciencesAngular resolutionLight sources010306 general physicsOptical follow-upDETECTORInstrumentation and Methods for Astrophysics (astro-ph.IM)MuonANTARESneutrino telescope; track reconstruction010308 nuclear & particles physicsCharged particlesTrack (disk drive)track reconstructionAstronomy and Astrophysics[SDU.ASTR.IM]Sciences of the Universe [physics]/Astrophysics [astro-ph]/Instrumentation and Methods for Astrophysic [astro-ph.IM]Physics - Data Analysis Statistics and ProbabilityFISICA APLICADAATMOSPHERIC NEUTRINOSNeutrino telescopesSYSTEMData Analysis Statistics and Probability (physics.data-an)
researchProduct

Automatic EMI filter design for power electronic converters oriented to high power density

2018

In this paper, a complete computer aided procedure based on the power density concept and aimed at the automatic design of EMI filters for power electronic converters is presented. It is rule-based, and it uses suitable databases built-up by considering information on passive components available from commercial datasheets. The power density constraint is taken into consideration by imposing the minimization of the filter volume and/or weight; nevertheless, the system in which the automatically designed filter is included satisfies the electromagnetic compatibility standards limits. Experimental validations of the proposed procedure are presented for two real case studies, for which the per…

Optimal designEMI filterComputer Networks and CommunicationsComputer sciencelcsh:TK7800-836002 engineering and technologyelectrical drivesElectrical driveEMI filter; power converter; power density; optimal design; electrical drives0202 electrical engineering electronic engineering information engineeringElectronic engineeringElectrical and Electronic EngineeringElectrical drives; EMI filter; Optimal design; Power converter; Power density; Control and Systems Engineering; Signal Processing; Hardware and Architecture; Computer Networks and Communications; Electrical and Electronic EngineeringPower densitylcsh:Electronics020208 electrical & electronic engineeringElectromagnetic compatibility020206 networking & telecommunicationsConvertersPower converterPower (physics)Power densityFilter designSettore ING-IND/31 - ElettrotecnicaComputer Networks and CommunicationFilter (video)Control and Systems EngineeringHardware and Architecturevisual_artElectronic componentSignal Processingvisual_art.visual_art_medium
researchProduct

Design of EMI Filters Using Multi-Objective Optimization

2018

A multi-objective design procedure for EMI filters in power converters is proposed. In a first step, the results obtained by an automatic design of EMI filters for power electronic converters oriented to satisfy the electromagnetic compatibility standards and the power density constraint which impose the minimization of the filter volume and/or weight, are evaluated. In a second step, the power losses and the cost related to the EMI filter configurations are estimated. By using the dominance concept, the EMI filter designs which are part of the Pareto front are selected among a discrete set of feasible configurations. Therefore, the configurations of the Pareto front take into consideration…

Optimization010302 applied physicsMotor driveComputer scienceMathematics::History and Overview020208 electrical & electronic engineeringElectromagnetic compatibility02 engineering and technologyConverters01 natural sciencesMulti-objective optimizationElectromagnetic interferencePower (physics)Settore ING-IND/31 - ElettrotecnicaSettore MAT/08 - Analisi NumericaFilter designFilter (video)EMIFilter design0103 physical sciences0202 electrical engineering electronic engineering information engineeringElectronic engineeringElectromagnetic compatibility2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe)
researchProduct

Flexible Data Driven Inventory Management with Interactive Multiobjective Lot Size Optimization

2021

We study data-driven decision support and formalise a path from data to decision making. We focus on lot sizing in inventory management with stochastic demand and propose an interactive multi-objective optimisation approach. We forecast demand with a Bayesian model, which is based on sales data. After identifying relevant objectives relying on the demand model, we formulate an optimisation problem to determine lot sizes for multiple future time periods. Our approach combines different interactive multi-objective optimisation methods for finding the best balance among the objectives. For that, a decision maker with substance knowledge directs the solution process with one’s preference inform…

Pareto optimalitydecision supportInformation Systems and ManagementComputer scienceinventory managementdata driven optimisationpäätöksentekomyyntilot sizingpäätöksentukijärjestelmätManagement Science and Operations ResearchManagement Information SystemsData-drivenInventory managementmulticriteria optimisationtoimitusketjutoptimointiBayesian modelsvarastotpareto-tehokkuusbayesilainen menetelmäinteractive methodsIndustrial engineeringdemand forecastingmonimuuttujamenetelmätkysyntäanalyysivarastonvalvontaennustettavuusmallit (mallintaminen)International Journal of Logistics Systems and Management
researchProduct

Determinants of performance drivers in online food delivery platforms: a dynamic performance management perspective

2022

PurposeThis study aims to demonstrate that the Dynamic Performance Management (DPM) framework, integrating performance management with system dynamics modelling, enables decision-makers to identify sustainable strategies in online food delivery platforms, thereby avoiding company failure.Design/methodology/approachThis study undertakes a multistep methodological approach. After the literature review, a retrospective case study approach was used. To build the DPM framework and the system dynamics simulation model, primary and secondary data were collected and analysed.FindingsThis study by adopting the DPM perspective highlights the critical role performance drivers play to assess the viabil…

Performance managementDynamic performance managementSystem dynamics modellingSettore SECS-P/07 - Economia AziendalePerformance driverStrategy and ManagementPerformance measurementOnline food delivery platformGeneral Business Management and AccountingInternational Journal of Productivity and Performance Management
researchProduct