Search results for " losses"
showing 10 items of 91 documents
Assessing a computational fluid dynamic technique (CFD) to evaluate pressure losses in drip irrigation laterals
2005
Designing Trickle Irrigation Systems in Sloping Fields without Pressure-Compensating Emitters: Application of the IRRILAB Software
2022
When designing trickle irrigation systems in sloped fields, the use of pressure-compensating (PC) emitters is generally preferred to ensure the emitter distribution uniformity regardless of the land topography and the variable operating pressures. However, the cost of PC emitters is generally higher than non-pressure-compensating (NPC) ones; moreover, the compensating membrane installed inside the emitters can lose elasticity due to the exposition to solar radiation, water quality, and chemical applications. Recently, the irrigation laboratory (IRRILAB) version 1.0 software application was developed to design microirrigation systems for rectangular and planar sectors when using NPC emitters…
Contagious agalactiae: a preliminary study on its impact on milk production of Sicilian sheep
2014
Room-temperature performance of 3 mm-thick cadmium-zinc-telluride pixel detectors with sub-millimetre pixelization.
2020
Cadmium–zinc–telluride (CZT) pixel detectors represent a consolidated choice for the development of room-temperature spectroscopic X-ray imagers, finding important applications in medical imaging, often as detection modules of a variety of new SPECT and CT systems. Detectors with 3–5 mm thicknesses are able to efficiently detect X-rays up to 140 keV giving reasonable room-temperature energy resolution. In this work, the room-temperature performance of 3 mm-thick CZT pixel detectors, recently developed at IMEM/CNR of Parma (Italy), is presented. Sub-millimetre detector arrays with pixel pitch less than 500 µm were fabricated. The detectors are characterized by good room-temperature performan…
Room-Temperature X-ray response of cadmium-zinc-Telluride pixel detectors grown by the vertical Bridgman technique
2020
In this work, the spectroscopic performances of new cadmium–zinc–telluride (CZT) pixel detectors recently developed at IMEM-CNR of Parma (Italy) are presented. Sub-millimetre arrays with pixel pitch less than 500 µm, based on boron oxide encapsulated vertical Bridgman grown CZT crystals, were fabricated. Excellent room-temperature performance characterizes the detectors even at high-bias-voltage operation (9000 V cm−1), with energy resolutions (FWHM) of 4% (0.9 keV), 1.7% (1 keV) and 1.3% (1.6 keV) at 22.1, 59.5 and 122.1 keV, respectively. Charge-sharing investigations were performed with both uncollimated and collimated synchrotron X-ray beams with particular attention to the mitigation o…
Influence of the manufacturing process on the radiation sensitivity of fluorine-doped silica-based optical fibers
2011
International audience; In this work, we analyze the origins of the observed differences between the radiation sensitivities of fluorine-doped optical fibers made with different fabrication processes. We used several experimental techniques, coupling in situ radiation-induced absorption measurements with post mortem confocal microscopy luminescence measurements. Our data showed that the silica intrinsic defects are generated both from precursor sites and from strained regular Si-O-Si linkages. Our work also provides evidence for the preponderant role of the chlorine in determining the optical losses at about 3.5 eV. The results show that the manufacturing process of these fibers strongly af…
Technical and economical comparison between different topologies of PV plant under mismatch effect
2014
This paper presents a technical and economical comparative analysis between two topology of photovoltaic plant. In particular the performances of series-parallel (SP) and total cross tied (TCT), topologies are taken into account, referring to a partially shaded photovoltaic plant. Thanks to a simulation model developed, in the paper the mismatch effects due to three different shading conditions, for SP and TCT topology plant, are quantified. Since the TCT solution, even though increase the energy production, raise the complexity of plants as well as their costs, an evaluation of the individual costs of each component of a SP and TCT plant topology, as PV modules, support structure, inverter…
A Proposed Methodology to Control Body Temperature in Patients at Risk of Hypothermia by means of Active Rewarming Systems
2014
Hypothermia is a common complication in patients undergoing surgery under general anesthesia. It has been noted that, during the first hour of surgery, the patient’s internal temperature (Tcore) decreases by 0.5–1.5°C due to the vasodilatory effect of anesthetic gases, which affect the body’s thermoregulatory system by inhibiting vasoconstriction. Thus a continuous check on patient temperature must be carried out. The currently most used methods to avoid hypothermia are based on passive systems (such as blankets reducing body heat loss) and on active ones (thermal blankets, electric or hot-water mattresses, forced hot air, warming lamps, etc.). Within a broader research upon the environment…
Noninvasive monitoring of polymer curing reactions by dielectrometry
2011
A microwave sensor system for the noninvasive monitoring of the curing process of a thermoset material placed inside a metallic mold is described. The microwave sensor is designed as an open-ended coaxial resonator with a curved surface adapted to the mold inner shape. The analysis of the microwave resonator comprises a recently developed method for deembedding the effect of coupling network in overcoupled resonators, so the range of permitted measurements encompass both low and high dielectric losses of polymeric materials. Results show that noninvasive, continuous monitoring of the microwave dielectric properties of the thermoset material can be performed in real time, allowing one to che…
Modulational instability in resonant optical fiber with higher-order dispersion effect
2010
International audience; The modulational instability (MI) of an electromagnetic wave in a resonant optical fiber with a two-level system is investigated. In the normal dispersion regime, we find the occurrence of nonconventional MI sidebands which are induced by the two-level resonant atoms. We also observe that the MI gain spectra are suppressed by the higher-order dispersion effect in the anomalous dispersion regime.