Search results for " photovoltaic"

Electrical and photovoltaic properties of indium‐tin‐oxide/p‐InSe/Au solar cells

1987

Conditions for efficiency improvement and optimization in indium‐tin‐oxide/p‐indium‐selenide solar cells are discussed in this paper. This aim is achieved by using low‐resistivity p‐indium‐selenide and by incorporating a back‐surface‐field contact. This contact is insured by a p‐indium selenide/gold barrier whose rectifying behavior is explained through the complex impurity structure of p‐indium‐selenide. Electrical and photovoltaic properties of the cells are also reported. The efficiency parameters under AM1 simulated conditions have been improved up to 32 mA/cm2 for the short‐circuit current density, 0.58 V for the open‐circuit voltage, and 0.63 for the filling factor. As a result, solar…

Nanoscale control in organic bulk heterojunctions of new set of materials for photovoltaic applications

2008

Boramers for Photovoltaic Applications

2008

Enhanced Efficiency of Organic Solar Cells by Thiol-capped Au-Nanoparticles

2015

In this work, we present a study on the effect of thiol-capped AuNPs of various sizesin an organic solar cell.AuNPs have been obtained by laser ablation in liquid solution[2], have been functionalized both with 2-naphthalenethiol and alkanethiol having different length. In addition to bulk heterojunction structures with optimized interpenetrating network of donors and acceptor domains, we have chosen to study planar heterojunctions (PHJs), consisting of three component thin films realized by sequential deposition of P3HT, AuNPs and PCBM from orthogonal solvents.

Technical and economical comparison between different topologies of PV plant under mismatch effect

2014

This paper presents a technical and economical comparative analysis between two topology of photovoltaic plant. In particular the performances of series-parallel (SP) and total cross tied (TCT), topologies are taken into account, referring to a partially shaded photovoltaic plant. Thanks to a simulation model developed, in the paper the mismatch effects due to three different shading conditions, for SP and TCT topology plant, are quantified. Since the TCT solution, even though increase the energy production, raise the complexity of plants as well as their costs, an evaluation of the individual costs of each component of a SP and TCT plant topology, as PV modules, support structure, inverter…

Direct measurement of optical losses in plasmon-enhanced thin silicon films (Conference Presentation)

2018

Plasmon-enhanced absorption, often considered as a promising solution for efficient light trapping in thin film silicon solar cells, suffers from pronounced optical losses i.e. parasitic absorption, which do not contribute to the obtainable photocurrent. Direct measurements of such losses are therefore essential to optimize the design of plasmonic nanostructures and supporting layers. Importantly, contributions of useful and parasitic absorption cannot be measured separately with commonly used optical spectrophotometry. In this study we apply a novel strategy consisting in a combination of photocurrent and photothermal spectroscopic techniques to experimentally quantify the trade-off betwee…

Color Tuning and White Light by Dispersing CdSe, CdTe, and CdS in PMMA Nanocomposite Waveguides

2013

In this paper, active nanocomposite waveguides based on the dispersion of CdS, CdTe, and CdSe colloidal quantum dots (QDs) in PMMA are proposed. Their propagation properties are studied as a function of the concentration of nanoparticles in the polymer using the variable length stripe method. When the three nanostructures are dispersed in the same film, the structure is able to waveguide the three basic colors: red (CdSe), green (CdTe), and blue (CdS), it being possible to engineer any waveguided color by an appropriate choice of the filling factor of each QD in the PMMA matrix. For this purpose, it is important to take into account reabsorption effects and the Förster energy transfe…

Time-dependent electric field in Al/CdTe/Pt detectors

2015

Abstract Al/CdTe/Pt detectors are very attractive devices for high-resolution X-ray spectroscopy, even though they suffer from bias-induced time instability (polarization). Polarization phenomena cause a progressive time-degradation of the spectroscopic performance of the detectors, due to hole trapping and detrapping from deep acceptor levels that directly control the electric field distribution. In this work we present experimental investigations on the electric field profile of planar Al/CdTe/Pt detectors by means of Pockels effect measurements. The time/temperature dependence of the electric field was investigated in a long time window (up to 10 h) and the correlation with the reverse c…

Polarization phenomena in Al/p-CdTe/Pt X-ray detectors

2013

Over the last decades, CdTe detectors are widely used for the development of room temperature X-ray and gamma ray spectrometers. Typically, high resolution CdTe detectors are fabricated with blocking contacts (indium, aluminum) ensuring low leakage currents and high electric field for optimum charge collection. As well known, time instability under bias voltage (termed as polarization) is the major drawback of CdTe diode detectors. Polarization phenomena cause a progressive degradation of the spectroscopic performance with time, due to hole trapping and detrapping from deep acceptors levels. In this work, we studied the polarization phenomenon on new Al/p-CdTe/Pt detectors, manufactured by …

A CdTe position sensitive spectrometer for hard X- and soft γ-ray polarimetry

2002

Coded Imager and Polarimeter for High Energy Radiation (CIPHER) is a hard X- and soft gamma- ray spectroscopic and polarimetric coded mask telescope based on an array of Cadmium telluride microspectrometers. The position sensitive detector (PSD) will be arranged in 4 modules of 32 x 32 crystals, each of 2 x 2 mm(2) cross-section and 10 mm thickness giving a total active area of about 160 cm(2), operating over a wide energy range (similar to10 keV to 1 MeV). Each PSD module is obtained by aligning 32 linear arrays of micro-detectors each also containing the integrated analog front end electronics on a thin ceramic layer. The CIPHER instrument will be proposed for a balloon experiment, both i…