Search results for "A2"
showing 10 items of 1101 documents
Atomic layer deposition of Ti-Nb-O thin films onto electrospun fibers for fibrous and tubular catalyst support structures
2018
Here, the authors report on the preparation of core-shell carbon-ceramic fibrous as well as ceramic tubular catalyst supports utilizing electrospinning and atomic layer deposition (ALD). In this paper, ALD of Ti-Nb-O thin films using TiCl4, Nb(OEt)5, and H2O as precursors is demonstrated. According to the time-of-flight-elastic recoil detection analysis and Rutherford backscattering spectrometry, carbon and hydrogen impurities were relatively low, but depend on the pulsing ratio of the precursors. Optimized ALD process was used for coating of sacrificial electrospun polyvinyl alcohol (PVA) template fibers to yield tubular Ti-Nb-O structures after thermal or solution based PVA removal. Anoth…
Supramolecular control of liquid crystals by doping with halogen-bonding dyes
2017
Introducing photochromic or polymeric dopants into nematic liquid crystals is a well-established method to create stimuli-responsive photonic materials with the ability to "control light with light". Herein, we demonstrate a new material design concept by showing that specific supramolecular interactions between the host liquid crystal and the guest dopants enhance the optical performance of the doped liquid crystals. By varying the type and strength of the dopant-host interaction, the phase-transition temperature, the order parameter of the guest molecules, and the diffraction signal in response to interference irradiation, can be accurately engineered. Our concept points out the potential…
Characterization and Electrochemical Properties of Oxygenated Amorphous Carbon (a-C) Films
2016
Amorphous carbon (a-C) films with varying oxygen content were deposited by closed-field unbalanced magnetron sputtering with the aim to understand the effect of oxygen on the structural and physical properties of the films and subsequently correlate these changes with electrochemical properties. The a-C films were characterized by transmission electron microscopy, helium-ion microscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and time-of-flight elastic recoil detection analysis. The electrochemical properties were studied by electrochemical impedance spectroscopy and cyclic voltammetry with several redox systems (Ru(NH3)62+/3+, Fe(CN)64−/3−, dopamine an…
Influence of Nitrogen Doping on Device Operation for TiO 2 -Based Solid-State Dye-Sensitized Solar Cells: Photo-Physics from Materials to Devices
2016
International audience; Solid-state dye-sensitized solar cells (ssDSSC) constitute a major approach to photovoltaic energy conversion with efficiencies over 8% reported thanks to the rational design of efficient porous metal oxide electrodes, organic chromophores, and hole transporters. Among the various strategies used to push the performance ahead, doping of the nanocrystalline titanium dioxide (TiO 2) electrode is regularly proposed to extend the photo-activity of the materials into the visible range. However, although various beneficial effects for device performance have been observed in the literature, they remain strongly dependent on the method used for the production of the metal o…
Three-Dimensional Printing of Nonlinear Optical Lenses.
2018
In the current paper, a series of nonlinear optical (NLO) active devices was prepared by utilizing stereolithographic three-dimensional printing technique. Microcrystalline NLO active component, urea, or potassium dihydrogen phosphate was dispersed in a simple photopolymerizable polyacrylate-based resin and used as the printing material to fabricate highly efficient transparent NLO lenses. The nonlinear activity of the printed lenses was confirmed by second-harmonic generation measurements using a femtosecond laser-pumped optical parametric amplifier operating at a wavelength of 1195 nm. The three-dimensional printing provides a simple method to utilize a range of NLO active compounds witho…
Optimization and analysis of processes with moving materials subjected to fatigue fracture and instability
2013
We study systems of traveling continuum modeling the web as a thin elastic plate of brittle material, traveling between a system of supports at a constant velocity, and subjected to bending, in-plane tension and small initial cracks. We study crack growth under cyclic in-plane tension and transverse buckling of the web analytically. We seek optimal in-plane tension that maximizes a performance vector function consisting of the number of cycles before fracture, the critical velocity and process effectiveness. The present way of applying optimization in the studies of fracture and stability is new and affords an analytical tool for process analysis. peerReviewed
Coded excitation speeds up the detection of the fundamental flexural guided wave in coated tubes
2016
The fundamental flexural guided wave (FFGW) permits ultrasonic assessment of the wall thickness of solid waveguides, such as tubes or, e.g., long cortical bones. Recently, an optical non-contact method was proposed for ultrasound excitation and detection with the aim of facilitating the FFGW reception by suppressing the interfering modes from the soft coating. This technique suffers from low SNR and requires iterative physical scanning across the source-receiver distance for 2D-FFT analysis. This means that SNR improvement achieved by temporal averaging becomes time-consuming (several minutes) which reduces the applicability of the technique, especially in time-critical applications such as…
Why are hydrogen ions best for MeV ion beam lithography?
2013
The exposure characteristics of poly-(methyl methacrylate) (PMMA) for 2MeV ^1H^+, 3MeV ^4He^2^+ and 6MeV ^1^2C^3^+ have been investigated. The samples were characterised using Atomic Force Microscopy (AFM), optical microscopy and Raman spectroscopy. Development was carried out using a 7:3 propan-2-ol:H"2O mixture to determine clearing and cross-linking fluences. It was found that protons had a considerably wider tolerance to exposure variations and a smaller span of doses within the ion track. Furthermore, the void formation and consequent stress-induced surface roughening were smaller for protons. For all ions, the C?C bond Raman signal increased continuously with dose and fluence, even we…
Properties of AlN grown by plasma enhanced atomic layer deposition
2011
Abstract The influence of growth parameters on the properties of AlN films fabricated by plasma-enhanced atomic layer deposition using trimethylaluminum and ammonia precursors was investigated. The atomic concentrations, refractive index, mass density, crystallinity and surface roughness were studied from the films grown in the temperature range of 100–300 °C with plasma discharge times between 2.5 and 30 s. The AlN films were shown to be hydrogen rich having H concentrations in the range of 13–27 at.% with inverse dependence on the growth temperature. The carbon and oxygen concentrations in the films were less than 2.6% and 0.2%, respectively. The refractive index and mass density of the f…
First experiments with gasdynamic ion source in CW mode.
2016
A new type of ECR ion source—a gasdynamic ECR ion source—has been recently developed at the Institute of Applied Physics. The main advantages of such device are extremely high ion beam current with a current density up to 600–700 emA/cm2 in combination with low emittance, i.e., normalized RMS emittance below 0.1 π mm mrad. Previous investigations were carried out in pulsed operation with 37.5 or 75 GHz gyrotron radiation with power up to 100 kW at SMIS 37 experimental facility. The present work demonstrates the first experience of operating the gasdynamic ECR ion source in CW mode. A test bench of SMIS 24 facility has been developed at IAP RAS. 24 GHz radiation of CW gyrotron was used for p…