Search results for "ALLOYS"
showing 10 items of 1689 documents
Halloysite nanotubes as a carrier of cornelian cherry (Cornus mas L.) bioactives
2020
Abstract Cornelian cherry fruit extract rich in anthocyanins and iridoids was encapsulated in the halloysite nanotubes in order to obtain a stable nanoscale system for better delivery and prolonged release of bioactive constituents. The cyclic vacuum technique was used for halloysite nanotubes-cornelian cherry composite preparation and the loading of 8.5 wt% was achieved. Pure cornelian cherry extract exhibited antiproliferative effect on HT-29, MCF7, and MRC-5 cells, pristine halloysite nanotubes affected the growth of MCF7 cells, while halloysite nanotubes-cornelian cherry composites demonstrated proliferative activity in all tested cells. The sustained release of anthocyanins was achieve…
Colorimetic biosensing dispositive based on reagentless hybrid biocomposite: Application to hydrogen peroxide determination
2016
Abstract An efficient approach to enhance the performance of colorimetric biosensors has been developed. The biosensor is based on the co-immobilization of the reagent 3,3′,5,5′-teramethylbencidine (TMB) and the enzyme horseradish peroxidase (HRP) in a PDMS-TEOS-SiO2NPs support. The HRP, in presence of H2O2, catalyzes the oxidation of TMB, producing a blue color. The generated biosensor, doped with the substrate (TMB) and the enzyme (HRP) (entrapped or adsorbed), has been used to determine H2O2 in real samples. Firstly, the immobilization of TMB and HRP in the composite has been studied in order to find the best suitable configuration. The kinetic parameters Vmax (maximum reaction rate) and…
Corrosion in alkanolamine used for acid gas removal: From natural gas processing to CO2 capture
2010
The aim of this paper is to review some of the parameters influencing the corrosivity of alkanolamine solvents used for natural gas purification or for CO2 capture. In the light of literature data and of new experimental results, the influences of temperature and of acid gas loading are discussed. These two parameters appear to have a strong impact on corrosion rates of carbon steel, with extrapolated corrosion rates of several tens of mm/year for the highest temperature and acid gas loading condition.
Functionalized halloysite nanotubes: Efficient carrier systems for antifungine drugs
2018
Abstract Halloysite-cyclodextrin hybrid was employed as carrier for sustained release of clotrimazole for vaginal or buccal treatment of Candidiasis. The nanocarrier was obtained by functionalization of halloysite surface with cyclodextrin moieties by means of microwave irradiation, with the final goal to obtain a scaffold for the covalent linkage of cysteamine hydrochloride. The interaction between clotrimazole and the pristine components, namely cyclodextrin and halloysite, was thoroughly investigated by several techniques such as DSC, TGA, UV–vis spectroscopy and some adsorption studies were, also, carried out. The release of the antifungine molecule was finally investigated in a medium …
Failure maps to assess bearing performances of glass composite laminates
2018
Aim of this article is the assessment of the bearing mechanical performances of pin-loaded glass laminates as function of their geometrical configuration. To this concern, 32 specimens having different hole diameter (D), laminate width (W), and hole center to laminate free edge distance (E) have been tested under bearing conditions. The maximum bearing stress and the stress-displacement curves were analyzed as function both of hole to laminate free edge distance E and hole diameter D. Moreover, an experimental 2D failure map was created by placing the experimental results (i.e., the kind of failure mechanism occurred for each geometrical configuration) in the plane E/D versus W/D ratios. In…
Weld quality prediction in linear friction welding of AA6082-T6 through an integrated numerical tool
2016
Abstract A numerical and an experimental campaign were carried out with varying oscillation frequency and interface pressure. The local values of the main field variables at the contact interface between the specimens were predicted by a Lagrangian, implicit, thermo-mechanical FEM model and used as input of a dedicated Neural Network (NN). The NN, integrated in the FEM environment, was designed in order to calculate both a Boolean output, indicating the occurrence of welding, and a continuous output, indicating the quality of the obtained solid state weld. The analysis of the obtained results allowed three different levels of bonding quality, i.e., no weld, sound weld and excess of heat, to…
Influence of friction stir processing conditions on the manufacturing of Al-Mg-Zn-Cu alloy/boron carbide surface composite
2018
Abstract Surface metal matrix composites were synthesized via friction stir processing (FSP) on the surface of aluminium alloy 7075 (AA 7075) sheets by incorporating B4C particles (B4CP). The influence of tool rotational speeds, powder particle sizes, and change in tool travel direction between FSP passes on particle distribution and resulting properties were studied in detail. Change in tool travel direction, decreased tool rotation speed and fine B4C particles enhanced B4CP distribution and wear properties thereof. Wear resistance of composites were doubled on account of the B4CP distribution and resultant several strengthening mechanisms.
The application of the random balance method in laser machining of metals
2008
International audience; Features peculiar to laser technology offer some advantages over more traditional processes, but, like all processes, it has its limitations. This article studies the limitations of laser machining of metals, and quantifies, through an experimental design method, the influence of operating parameters on productivity and on the quality of the machined surface. Three study materials were used: an aluminium alloy, stainless steel and a titanium alloy. An initial reading of the results indicates that productivity depends mainly on the frequency of the laser pulse and that the aluminium alloy behaves differently from the other two. The quality of the machined surface, jud…
A numerical model for Wire integrity prediction in Friction Stir Extrusion of magnesium alloys
2017
Abstract A numerical model for the prediction of the wire quality produced by the novel direct machining chip recycling technique known as Friction Stir Extrusion (FSE) is presented. Wire microstructure and wire integrity have been predicted by embedding in the code the equations enabling the calculation of the Zener-Hollomon parameter as well as the W parameter of the Pivnik-Plata solid bonding criterion. The proposed model, developed for the AZ31 magnesium alloy using the commercial simulation package DEFORM, is 3D Lagrangian, thermo-mechanically coupled with visco-plastic material behavior. The model was first validated against experimental temperature measurements and then used to predi…
Influence of processing parameters and initial temper on Friction Stir Extrusion of 2050 aluminum alloy
2017
Abstract Friction Stir Extrusion is an innovative production technology that enables direct wire production via consolidation and extrusion of metal chips or solid billets. During the process, a rotating die is plunged into a cylindrical chamber containing the material to be extruded. The stirring action of the tool produces plastic flow in the extrusion chamber, densifying and heating the charge so that finally, fully dense rods are extruded. Experiments have been carried out in order to investigate the influence of process parameters and initial temper of the base material on the process variables and on the extrudates’ mechanical properties.