Search results for "Applied Physics"
showing 10 items of 1226 documents
Experimental evidence of high spatial confinement of elastic energy in a phononic cantilever
2021
We report on experimental high spatial confinement of elastic energy in a silicon phononic cantilever for which the quality factor of a higher-order flexural resonance is increased by a factor of 27 (from Q ∼ 80 to Q ∼ 2130) with the use of a three-row phononic crystal (PnC) strip. As shown by numerical simulations performed with the finite element method, the PnC both reduces anchor loss and confines elastic energy inside the cantilever. The PnC and the cantilever are fabricated with standard clean room techniques on a silicon on insulator substrate. Optical measurements of the out-of-plane displacements are performed with a laser scanning interferometer in a frequency range around 2 MHz.
Structural investigation of crystallized Ge-Ga-Se chalcogenide glasses
2018
H. Klym thanks to the Ministry of Education and Science of Ukraine for support and Dr. P. Demchenko for the assistance in XRD experiments.
Optical and Vibrational Spectra of CsCl-Enriched GeS2-Ga2S3 Glasses
2016
Optical and FTIR spectroscopy was employed to study the properties of 80GeS2-20Ga2S3-CsCl chalcohalide glasses with CsCl additives in a temperature range of 77–293 K. It is shown that CsCl content results in the shift of fundamental absorption edge in the visible region. Vibrational bands in FTIR spectra of (80GeS2-20Ga2S3)100 − х (СsCl) x (x = 5, 10, and 15) are identified near 2500 cm−1, 3700 cm−1,, around 1580 cm−1, and a feature at 1100 cm−1. Low energy shifts of vibrational frequencies in glasses with a higher amount of CsCl can be caused by possible thermal expansion of the lattice and nanovoid agglomeration formed by CsCl additives in the inner structure of the Ge-Ga-S glass.
Photoinduced charge transfer from Carbon Dots to Graphene in solid composite
2019
Abstract The emission in solid phase of Carbon Dots (CDs) deposited by drop-casting technique is investigated by means of micro-photoluminescence. Graphene and SiO2 are used as substrates, and the influence of their different nature – conductive or insulating – on the emission of CDs is highlighed. In particular, a systematic loss of efficiency in the emission of CDs on graphene is found, suggesting a CD-graphene interaction possibly due to a photoinduced electron transfer between the surface states of CDs and the conduction band of graphene. Finally, thanks to the negligible influence on CDs emission, SiO2 substrate is used as support to perform thermal processing of CDs in solid phase, sh…
Laser-induced damage in cold-sprayed composite coatings
2011
International audience; Ag-Ni composite coatings were achieved using the cold spray process. In this work, two blends were sprayed to lead to coatings with different mechanical properties, which corresponded to either a fine or a coarse microstructure. These coatings were studied using SEM and X-ray microtomography (XMT) to determine the best coating quality through characterization of particle-to-particle bonding. The fine microstructure showed better properties than the coarse microstructure. To avoid time-consuming characterization techniques such as SEM and XMT, an innovative laser characterization test was developed. The principle of this test is based on the thermal shock-induced by a…
Progress in Violet Light-Emitting Diodes Based on ZnO/GaN Heterojunction
2020
Progress in light-emitting diodes (LEDs) based on ZnO/GaN heterojunctions has run into several obstacles during the last twenty years. While both the energy bandgap and lattice parameter of the two semiconductors are favorable to the development of such devices, other features related to the electrical and structural properties of the GaN layer prevent an efficient radiative recombination. This work illustrates some advances made on ZnO/GaN-based LEDs, by using high-thickness GaN layers for the p-region of the device and an ad hoc device topology. Heterojunction LEDs consist of a quasicoalesced non-intentionally doped ZnO nanorod layer deposited by chemical bath deposition onto a metal&ndash
Performance Study of Split Ferrite Cores Designed for EMI Suppression on Cables
2020
The ideal procedure to start designing an electronic device is to consider the electromagnetic compatibility (EMC) from the beginning. Even so, EMC problems can appear afterward, especially when the designed system is interconnected with external devices. Thereby, electromagnetic interferences (EMIs) could be transmitted to our device from power cables that interconnect it with an external power source or are connected to another system to establish wired communication. The application of an EMI suppressor such as a sleeve core that encircles the cables is a widely used technique to attenuate EM disturbances. This contribution is focused on the characterization of a variation of this cable …
EDA: EXAFS data-analysis software package
2021
The EXAFS data-analysis software package EDA consists of a suite of programs running under a Windows operating system environment that is designed to perform all steps of conventional EXAFS data analysis such as extraction of the XANES/EXAFS parts of the X-ray absorption coefficient, Fourier filtering and EXAFS fitting using the Gaussian and cumulant models. The package also includes two advanced approaches which allow the reconstruction of the radial distribution function (RDF) from EXAFS based on the regularization-like method and the calculation of configuration-averaged EXAFS using a set of atomic configurations obtained from molecular-dynamics or Monte Carlo simulations.---- / / / ----…
Plasmonic nanostructures for light trapping in thin-film solar cells
2019
Abstract The optical properties of localized surface plasmon resonances (LSPR) sustained by self-assembled silver nanoparticles are of great interest for enhancing light trapping in thin film photovoltaics. First, we report on a systematic investigation of the structural and the optical properties of silver nanostructures fabricated by a solid-state dewetting process on various substrates. Our study allows to identify fabrication conditions in which circular, uniformly spaced nanoparticles are obtainable. The optimized NPs are then integrated into plasmonic back reflector (PBR) structures. Second, we demonstrate a novel procedure, involving a combination of opto-electronic spectroscopic tec…
Strain-controlled domain wall injection into nanowires for sensor applications
2021
We investigate experimentally the effects of externally applied strain on the injection of 180$^\circ$ domain walls (DW) from a nucleation pad into magnetic nanowires, as typically used for DW-based sensors. In our study the strain, generated by substrate bending, induces in the material a uniaxial anisotropy due to magnetoelastic coupling. To compare the strain effects, $Co_{40}Fe_{40}B_{20}$, $Ni$ and $Ni_{82}Fe_{18}$ samples with in-plane magnetization and different magnetoelastic coupling are deposited. In these samples, we measure the magnetic field required for the injection of a DW, by imaging differential contrast in a magneto-optical Kerr microscope. We find that strain increases t…