Search results for "BEARING"
showing 10 items of 284 documents
Bioresorbable β-TCP-FeAg nanocomposites for load bearing bone implants: High pressure processing, properties and cell compatibility.
2017
In this paper, the processing and properties of iron-toughened bioresorbable β-tricalcium phosphate (β-TCP) nanocomposites are reported. β-TCP is chemically similar to bone mineral and thus a good candidate material for bioresorbable bone healing devices; however intrinsic brittleness and low bending strength make it unsuitable for use in load-bearing sites. Near fully dense β-TCP-matrix nanocomposites containing 30vol% Fe, with and without addition of silver, were produced employing high energy attrition milling of powders followed by high pressure consolidation/cold sintering at 2.5GPa. In order to increase pure iron's corrosion rate, 10 to 30vol% silver were added to the metal phase. The…
Centrifuge tests on strip footings on sand with a weak layer
2017
Tests on small-scale physical models of a strip footing resting on a dense sand bed containing a thin horizontal weak soil layer were carried out at normal gravity (1 g ). The results, reported in a companion paper, point out that the weak layer plays an important role in the failure mechanism and the ultimate bearing capacity of the footing if it falls within the ground volume relevant to the behaviour of the sand–footing system. The same problem was also investigated by means of centrifuge tests on reduced-scale models at 25 g and 40 g . The results of these tests, reported and discussed in this paper, confirm that failure mechanisms are governed substantially by the presence of the weak…
The on-line curvilinear component analysis (onCCA) for real-time data reduction
2015
Real time pattern recognition applications often deal with high dimensional data, which require a data reduction step which is only performed offline. However, this loses the possibility of adaption to a changing environment. This is also true for other applications different from pattern recognition, like data visualization for input inspection. Only linear projections, like the principal component analysis, can work in real time by using iterative algorithms while all known nonlinear techniques cannot be implemented in such a way and actually always work on the whole database at each epoch. Among these nonlinear tools, the Curvilinear Component Analysis (CCA), which is a non-convex techni…
Tactical metrics that discriminate winning, drawing and losing teams in UEFA Euro 2012®
2015
The objectives of this article are twofold: first, an innovative approach to notational analysis in football is outlined. By considering the important theoretical requirements for the analysis of sports games (like the interaction between two parties, the procedural sequence of action or the significance of tactical behaviour) the meaning of the introduced parameters, called tactical metrics, is illustrated. In a second step, the validity of this approach is tested using matches of the Union of European Football Associations (UEFA) Euro 2012® to investigate a connection between these metrics and success. The results show that 11 tactical metrics model tactical behaviour in 4 different dimen…
Structural performances of pultruded GFRP emergency structures – Part 2: Full-scale experimental testing
2019
Abstract This paper presents an experimental testing of a pultruded glass fiber reinforced polymer (FRP) structure used for emergency applications continuing the discussion presented in a previous paper (part 1) where the study of the characteristics of material and elements are presented. First, the design of the composite structure and components and the evaluation of the structural behavior by means of numerical and analytical approach according to current regulatory codes are described. In this frame, the global and local response was observed according to load paths deriving from the design loads at limit states. Then, the experimental test on a full-scale 2D model is presented at diff…
Coupled Electromechanical Analysis of a Permanent-Magnet Bearing
2017
In this paper we present a new Permanent Magnets (PMs) bearing, which is composed of a rotor capable to levitate at a short distance from a dedicated stator. Proper configurations of PMs arranged on both the stator and the rotor allows having the magnetic suspension. Intrinsic mechanical instability characterizes the device; a passive stabilization is attempted exploiting eddy currents on a conducting sheet that surrounds the magnets on the stator. The system has been simulated by means of a dedicated numerical code that takes into account the effects of magneto-mechanical coupling. The coupled problem has been integrated by means of a prediction-correction nested scheme. Some interesting r…
Thermo-Elasto-Hydrodynamic Analysis of a Crankshaft Journal Bearing
2006
This paper summarizes the essential parts of a numerical analysis activity in which the application of the Thermo-Elasto-Hydro-Dynamic (TEHD) lubrication theory to a crankshaft journal bearing is examined. The study is carried out through numerical computations performed by a commercial flexible-multibody code which simulates the lubricated contact between elastic bodies in large displacement motion. A multibody model has been created and its thermal behaviour has been validated by comparison with experimental temperatures. The validated model is used to perform two comparative analyses between the TEHD modelling and the Elasto-Hydro-Dynamic (EHD) modelling for max torque and max power cond…
Reaction between Cu-bearing minerals and hydrothermal fluids at 800 °C and 200 MPa: Constraints from synthetic fluid inclusions
2020
Abstract Transport and deposition of copper in the Earth's crust are mainly controlled by the solubility of Cu-bearing phases and the speciation of Cu in magmatic-hydrothermal fluids. To improve our understanding of copper mobilization by hydrothermal fluids, we conducted an experimental study on the interaction between Cu-bearing phases (metallic copper, Cu2O, CuCl) and aqueous chloride solutions (H2O ± NaCl ± HCl; with Cl concentrations of 0 to 4.3 mol kg-1). The experiments were run in rapid heat/rapid quench cold-seal pressure vessels at 800 °C, 200 MPa, and logfO2 ~ NNO+2.3. Either Cu or Au capsules were used as containers. The reaction products were sampled in situ by the entrapment o…
Effect of cyclic loading on fracture strength and microleakage of a quartz fiber dowel with different adhesive, cement and resin core material combin…
2010
Background: This study evaluated the performance of different adhesive-cement-core combinations coupled with quartz fiber dowels after cyclic loading and fracture strength tests and assessed the microleakage using dye penetration method. Methods: Forty maxillary canines (n=10 per group) were restored with fiber dowels (Quartz fiber DT Light Post) and four adhesive-cement-core material combinations [(Group 1: All-Bond 2+C&B (root) / All-Bond 2+Biscore (core); Group 2: All-Bond 2+Bisfil 2B (root) / All-Bond 2+Bisfil 2B (core); Group 3: Scotchbond 1+RelyX ARC (root) / Scotchbond 1+Supreme (core); Group 4: RelyX Unicem (root) / Scotchbond 1+Filtek Supreme (core)]. The specimens were initially c…
ChemInform Abstract: Asymmetric Synthesis of Cyclopentanes Bearing Four Contiguous Stereocenters via an NHC-Catalyzed Michael/Michael/Esterification …
2016
An NHC-catalyzed Michael/Michael/esterification domino reaction via homoenolate/enolate intermediates for the asymmetric synthesis of tetrasubstituted cyclopentanes bearing four contiguous stereocenters is described. A variety of α,β-unsaturated aldehydes and 2-nitroallylic acetates react well with good domino yields and high stereoselectivities.