Search results for "BIOPOLYMER"
showing 10 items of 169 documents
Mechanical, Thermomechanical and Reprocessing Behavior of Green Composites from Biodegradable Polymer and Wood Flour
2015
The rising concerns in terms of environmental protection and the search for more versatile polymer-based materials have led to an increasing interest in the use of polymer composites filled with natural organic fillers (biodegradable and/or coming from renewable resources) as a replacement for traditional mineral inorganic fillers. At the same time, the recycling of polymers is still of fundamental importance in order to optimize the utilization of available resources, reducing the environmental impact related to the life cycle of polymer-based items. Green composites from biopolymer matrix and wood flour were prepared and the investigation focused on several issues, such as the effect of r…
Effect of relative humidity on carvacrol release and permeation properties of chitosan based films and coating
2014
International audience; The influence of water vapour conditions on mass transport and barrier properties of chitosan based films and coatings were studied in relation to surface and structural properties. Water contact angles, material swelling, polymer degradation temperature, barrier properties (PO2, PCO2, WVP) and aroma diffusion coefficients were determined. The solvent nature and the presence of carvacrol influenced the surface and structural properties and then the barrier performance of activated chitosan films. Increasing RH from 0% to 100% led to a significant increase in material swelling. The plasticization effect of water was more pronounced at high humid environment, while at …
Active packaging films with natural antioxidants to be used in meat industry: A review.
2018
Spoilage of meat products during processing, distribution and exposure in the markets have an important negative impact on meat industry from an economic point of view. Two of the main problems of meat and products during processing and subsequent storage are lipid oxidation and deterioration due to microorganism growth. In this context, several packaging alternatives have been developed by meat industry in order to limit these losses and to extend the meat products´ shelf life. Over the last years, the use of active packaging has been proposed as an alternative to traditional packaging. The principle of active packaging, particularly antioxidant active packaging, consists of including acti…
Membrane-penetrating Domain of Streptolysin O Identified by Cysteine Scanning Mutagenesis
1996
Streptolysin O (SLO), a polypeptide of 571 amino acids, belongs to a family of highly homologous toxins that bind to cell membranes containing cholesterol and then polymerize to form large transmembrane pores. A conserved region close to the C terminus contains the single cysteine residue of SLO and has been implicated in membrane binding, which has been the only clear assignment of function to a part of the sequence. We have used a cysteine-less active mutant of SLO to introduce single cysteine residues at 19 positions distributed throughout the sequence. The cysteines were derivatized with the polarity-sensitive fluorophore acrylodan, and the fluorescence emission of the label was examine…
Preliminary evaluation of biopolymers production by mixed microbial culture from citrus wastewater in a MBR system using respirometric techniques
2021
Abstract This preliminary study was aimed at evaluating the feasibility to produce biopolymers (BP) from citrus wastewater by mixed microbial culture in an anaerobic/aerobic membrane bioreactor (A/O-MBR). The activated sludge of the A/O-MBR was successfully enriched in microorganisms having a good capacity in producing intracellular biopolymers. The production of BP was found to be about 0.55 mgCOD mgCOD−1 using pure acetate at a concentration of 1000 mgCOD L−1. When using fermented wastewater, the conversion of acetate into BP product was 0.56 mgCOD mgCOD−1 in the test performed with C/N equal to 1000:1, whereas it was only 0.12 mgCOD mgCOD−1 in the test with C/N of 100:5. The results achi…
Ionic conduction, rectification, and selectivity in single conical nanopores
2006
Modern track-etching methods allow the preparation of membranes containing a single charged conical nanopore that shows high ionic permselectivity due to the electrical interactions of the surface pore charges with the mobile ions in the aqueous solution. The nanopore has potential applications in electrically assisted single-particle detection, analysis, and separation of biomolecules. We present a detailed theoretical and experimental account of the effects of pore radii and electrolyte concentration on the current-voltage and current-concentration curves. The physical model used is based on the Nernst-Planck and Poisson equations. Since the validity of continuum models for the descriptio…
Synthesis and Biological Evaluation of 1-Methyl-2-(3',4',5'-trimethoxybenzoyl)-3-aminoindoles as a New Class of Antimitotic Agents and Tubulin Inhibi…
2008
The 2-(3,4,5-trimethoxybenzoyl)-2-aminoindole nucleus was used as the fundamental structure for the synthesis of compounds modified with respect to positions C-4 to C-7 with different moieties (chloro, methyl, or methoxy). Additional structural variations concerned the indole nitrogen, which was alkylated with small alkyl groups such as methyl or ethyl. We have identified 1-methyl-2-(3,4,5-trimethoxybenzoyl)-3-amino-7-methoxyindole as a new highly potent antiproliferative agent that targets tubulin at the colchicine binding site and leads to apoptotic cell death.
Ion transport and selectivity in nanopores with spatially inhomogeneous fixed charge distributions
2007
Polymeric nanopores with fixed charges show ionic selectivity when immersed in aqueous electrolyte solutions. The understanding of the electrical interaction between these charges and the mobile ions confined in the inside nanopore solution is the key issue in the design of potential applications. The authors have theoretically described the effects that spatially inhomogeneous fixed charge distributions exert on the ionic transport and selectivity properties of the nanopore. A comprehensive set of one-dimensional distributions including the skin, core, cluster, and asymmetric cases are analyzed on the basis of the Nernst-Planck equations. Current-voltage curves, nanopore potentials, and tr…
Keyhole limpet hemocyanin: 9-A CryoEM structure and molecular model of the KLH1 didecamer reveal the interfaces and intricate topology of the 160 fun…
2008
Abstract Hemocyanins are blue copper-containing respiratory proteins in the hemolymph of many arthropods and molluscs. Molluscan hemocyanins are decamers, didecamers, or multidecamers of a 340- to 400-kDa polypeptide subunit containing seven or eight globular functional units (FUs; FU-a to FU-h), each with an oxygen-binding site. The decamers are short 35-nm hollow cylinders, with their lumen narrowed by a collar complex. Our recently published 9-A cryo-electron microscopy/crystal structure hybrid model of a 3.4-MDa cephalopod hemocyanin decamer [Nautilus pompilius hemocyanin (NpH)] revealed the pathway of the seven-FU subunit (340 kDa), 15 types of inter-FU interface, and an asymmetric col…
Solution structure of aD,L-alternating oligonorleucine as a model of double-stranded antiparallel ?-helix
2002
Conformational characteristics of alternating D,L linear peptides are of particular interest because of their capacity to form transmembrane channels with different transport properties, as some natural antibiotics do. Single- and double-stranded beta-helical structures are common for alternating D,L peptides. The stability of the beta-helix depends on several structural factors, such as the backbone peptide length, type and position of side chains, and nature of terminal groups. The NMR and molecular dynamics solution conformation of a synthetic alternating D,L-oligopeptide with 15 norleucines (XVMe) has been used as a model to get insight in to the conformational features of double-strand…