Search results for "Bending"
showing 10 items of 244 documents
Determining the deformation and resulting coupling efficiency degradation of ultrastable fiber-coupled optical benches under load.
2020
Fiber-coupled optical benches are an integral part of many laser systems. The base of such an optical bench is usually a slab of solid material, onto which optical components are fixed. In many environments, the ability to retain high fiber coupling efficiency under mechanical loads is essential. In this article, we study the fiber-to-fiber coupling efficiency under the application of static mechanical loads experimentally and theoretically: We constructed a simple three-point bending setup to interferometrically measure the deformation of an optical bench under load. Using the same setup, we further recorded the resulting coupling efficiency variations. The examined optical benches are bas…
Mechanical properties of macroscopic magnetocrystals
2019
Abstract We studied experimentally and by numerical simulations the mechanical response of arrays of macroscopic magnetic spheres when an external stress is applied. First, the tensile strength of single chains and ribbons was analyzed. Then, simple cubic (cP), hexagonal (Hx) and hybrid (cP-Hx) structures, called here magnetocrystals , were assembled and subjected to tensile stress, bending stress and torsion until failure was reached. Atomistic crystalline structures are isotropic, but in the case of magnetocrystals, even when geometric isotropy is obeyed, dipolar magnetic interactions introduce a physical anisotropy which modifies, in a non-usual manner, the structures response to the kin…
Mechanical characterisation of pentagonal gold nanowires in three different test configurations: A comparative study.
2019
Abstract Mechanical characterisation of individual nanostructures is a challenging task and can greatly benefit from the utilisation of several alternative approaches to increase the reliability of results. In the present work, we have measured and compared the elastic modulus of five-fold twinned gold nanowires (NWs) with atomic force microscopy (AFM) indentation in three different test configurations: three-point bending with fixed ends, three-point bending with free ends and cantilevered-beam bending. The free-ends condition was realized by introducing a novel approach where the NW is placed diagonally inside an inverted pyramid chemically etched in a silicon wafer. In addition, all thre…
Biomechanics and functional morphology of a climbing monocot.
2015
Climbing monocots can develop into large bodied plants despite being confined by primary growth. In our study on Flagellaria indica we measured surprisingly high stem biomechanical properties (in bending and torsion) and we show that the lack of secondary growth is overcome by a combination of tissue maturation processes and attachment mode. This leads to higher densities of mechanically relevant tissues in the periphery of the stem and to the transition from self-supporting to climbing growth. The development of specialised attachment structures has probably underpinned the evolution of numerous other large bodied climbing monocot taxa.
Wind Resistance of Eastern Baltic Silver Birch (Betula pendula Roth.) Suggests Its Suitability for Periodically Waterlogged Sites
2020
Storms and wind damage are the main cause of biomass loss in forests of Northern Europe, as well as they are synergic with the disturbances causing intense water and temperature stress. This highlights the necessity for climate-smart management at landscape level coupling ecological demands of forestry species with their wind resistance. Silver birch (Betula pendula Roth.), which is highly plastic species, appears to be promising for a wider application under such conditions, as it is believed to tolerate wide range of weather conditions. Though silver birch can be sensitive to water deficit and windthrow, local information on its wind tolerance in sites with different moisture regimes is a…
Structural and Mechanical Modification Induced by Water Content in Giant Wild Reed (A. donax L.)
2018
Giant wild reed Arundo donax L. is an aggressive agricultural species with remarkable features such as fast-growing, untapped economic potential, eco-friendliness, and high specific properties (e.g., high strength/weight and modulus/weight ratios). Here, the bending properties of giant reed were studied at a molecular level to evaluate the effect of the conditions used during the preparation for their applications (also referred to as treatment conditions). The aim was to achieve new information potentially useful to suggest new possible applications of A. donax L. for structural applications in modern buildings. In this study, green reeds collected in a Sicilian plantation were dried for 2…
Springback of thick sheet AHSS subject to bending under tension
2012
Lien vers la version éditeur : http://www.sciencedirect.com/science/article/pii/S0020740312000677 The springback behavior of four advanced high-strength sheet steels (Dual-Phase, TRIP, ferrite-bainite) with thicknesses ranging from 1.2 to 4 mm was investigated by means of the bending-under-tension (BUT) test. The applicability of several guidelines from the literature was investigated experimentally and numerically. The monotonic decrease of springback as back force increased was confirmed for this category of sheet steels, and a general trend for the non-linear influence of the tool radius was observed. The influence of numerical factors on the predicted values of springback was investigat…
Numerical Treatment of the Filament-Based Lamellipodium Model (FBLM)
2017
We describe in this work the numerical treatment of the Filament-Based Lamellipodium Model (FBLM). This model is a two-phase two-dimensional continuum model, describing the dynamics of two interacting families of locally parallel F-actin filaments. It includes, among others, the bending stiffness of the filaments, adhesion to the substrate, and the cross-links connecting the two families. The numerical method proposed is a Finite Element Method (FEM) developed specifically for the needs of this problem. It is comprised of composite Lagrange–Hermite two-dimensional elements defined over a two-dimensional space. We present some elements of the FEM and emphasize in the numerical treatment of t…
Intramolecular structural parameters are key modulators of the gel-liquid transition in coarse grained simulations of DPPC and DOPC lipid bilayers
2018
The capability of coarse-grained models based on the MARTINI mapping to reproduce the gel-liquid phase transition in saturated and unsaturated model lipids was investigated. We found that the model is able to reproduce a lower critical temperature for 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) with respect to 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). Nonetheless, the appearance of a gel phase for DOPC is strictly dependent on the intramolecular parameters chosen to model its molecular structure. In particular, we show that the bending angle at the coarse-grained bead corresponding to the unsaturated carbon-carbon bond acts as an order parameter determining the temperature of …
Sheet Bending Modelling for AA 5083 Aluminium Alloy
1995
An extensive investigation of the V- and U-die bending processes of AA 5083 aluminium alloy has been performed by means of the finite element method and the experimental tests. The predicted results, in terms of elastic springback and loads, were compared with the experimental ones in similar conditions. At a given punch stroke, the springback ratio K increases with the sheet thickness, and, at a constant sheet thickness, K increases with the punch stroke. The comparison between predicted and experimental K values shows an excellent agreement in all the ranges of punch stroke and sheet thickness investigated. A very good agreement between the predicted bending forces and the experimental on…