Search results for "Bioreactor"

showing 10 items of 397 documents

Micropollutants removal in an anaerobic membrane bioreactor and in an aerobic conventional treatment plant

2012

The paper expresses an attempt to tackle the problem due to the presence of micropollutants in wastewater which may be able to disrupt the endocrine system of some organisms. These kinds of compounds are ubiquitously present in municipal wastewater treatment plant (WWTP) effluents. The aim of this paper is to compare the fate of the alkylphenols-APs (4-(tert-octyl)) phenol, t-nonylphenol and 4-p-nonylphenol and the hormones (estrone, 17ß-estradiol and 17¿-ethinylestradiol) in a submerged anaerobic membrane bioreactor (SAMBR) pilot plant and in a conventional activated sludge wastewater treatment plant (CTP). The obtained results are also compared with the results obtained in a previous stud…

INGENIERIA HIDRAULICAUnclassified drugEffluentsExtractionEstrogenic hormonesOxic conditionsMembrane bioreactorDegradationBioreactorsEndocrinologyChemical structureLimit of Detection(4 (tert octyl)) phenolWater PollutantsAnaerobiosisWater Science and TechnologyPilot plantsWaste water managementEstradiolChemistryMembranePhenol derivativeWater samplingPulp and paper industryWaste treatmentEndocrine disruptorWastewaterPollutant removalMembrane bioreactorSewage treatmentActivated sludge plantsAnaerobic exerciseAnaerobic membrane bioreactorActivated sludge plantChromatography GasEnvironmental EngineeringWaste water treatment plantHydraulic retention timeEstroneBioreactorMass fragmentographyPollutantSewage pumping plantsArticlePhenolsEthinylestradiolBioreactorWater treatment plantsEffluentSolid Phase MicroextractionTECNOLOGIA DEL MEDIO AMBIENTE3 nonylphenolChromatography4 nonylphenolAlkylphenol polyoxyethyl etherMembranes ArtificialAlkylphenolsHormoneHormonesActivated sludgeActivated sludgeAnoxic conditionsWater Science and Technology
researchProduct

Filtration process cost in submerged anaerobic membrane bioreactors (AnMBRs) for urban wastewater treatment

2015

[EN] The objective of this study was to evaluate the effect of the main factors affecting the cost of the filtration process in submerged anaerobic membrane bioreactors (AnMBRs) for urban wastewater (UWW) treatment. Experimental data for CAPEX/OPEX calculations was obtained in an AnMBR system featuring industrial-scale hollow-fiber (HF) membranes. Results showed that operating at J(20) slightly higher than the critical flux results in minimum CAPEX/OPEX. The minimum filtration process cost ranged from Euro0.03 to Euro0.12 per m(3), mainly depending on SGD(m) (from 0.05 to 0.3 m(3)m(-2)h(-1)) and MLSS (from 5 to 25 gL-1). The optimal SGD(m) resulted in approx. 0.1 m(3)m(-2)h(-1).

Industrial-scale hollow-fiber membranesINGENIERIA HIDRAULICAGeneral Chemical EngineeringFiltration and Separation02 engineering and technology010501 environmental sciences01 natural scienceslaw.invention020401 chemical engineeringlawBioreactorUrban wastewater (UWW)0204 chemical engineeringFiltrationTECNOLOGIA DEL MEDIO AMBIENTE0105 earth and related environmental sciencesChemistryProcess Chemistry and TechnologySubmerged anaerobic MBR (AnMBR)General ChemistryPulp and paper industryMembraneWastewaterProcess costingSewage treatmentBiochemical engineeringAnaerobic exerciseCAPEXOPEX
researchProduct

Cultivation of primmorphs from the marine sponge Suberites domuncula: morphogenetic potential of silicon and iron.

2002

Abstract Marine demosponges (phylum Porifera) are rich sources for potent bioactive compounds. With the establishment of the primmorph system from sponges, especially from Suberites domuncula , the technology to cultivate sponge cells in vitro improved considerably. This progress was possible after the elucidation that sponges are provided with characteristic metazoan cell adhesion receptors and extracellular matrix molecules which allow their cells a positioning in a complex organization pattern. This review summarizes recent data on the cultivation of sponges in aquaria and—with main emphasis—of primmorphs in vitro. It is outlined that silicon and Fe(+++) contribute substantially to the f…

IronCell Culture TechniquesBioengineeringApplied Microbiology and BiotechnologyBioreactorsSpecies SpecificityFood supplyMorphogenesisAnimalsGrowth SubstancesEcosystemCell AggregationPhylum PoriferabiologyEcologySilicatesGeneral MedicineExtracellular matrix moleculesbiology.organism_classificationCanal systemCell biologyPoriferaSuberites domunculaSpongeGene Expression RegulationFerritinsCell DivisionBiotechnologySuberitesJournal of biotechnology
researchProduct

Regulatory O 2 tensions for the synthesis of fermentation products in Escherichia coli and relation to aerobic respiration

1997

In an oxystat, the synthesis of the fermentation products formate, acetate, ethanol, lactate, and succinate of Escherichia coli was studied as a function of the O2 tension (pO2) in the medium. The pO2 values that gave rise to half-maximal synthesis of the products (pO0. 5) were 0.2-0.4 mbar for ethanol, acetate, and succinate, and 1 mbar for formate. The pO0.5 for the expression of the adhE gene encoding alcohol dehydrogenase was approximately 0.8 mbar. Thus, the pO2 for the onset of fermentation was distinctly lower than that for anaerobic respiration (pO0.5/= 5 mbar), which was determined earlier. An essential role for quinol oxidase bd in microaerobic growth was demonstrated. A mutant de…

Iron-Sulfur ProteinsAnaerobic respirationFormatesCellular respirationSuccinic AcidAcetatesBiologymedicine.disease_causeColiphagesBiochemistryMicrobiologyGene Expression Regulation Enzymologicchemistry.chemical_compoundBioreactorsBacterial ProteinsMultienzyme ComplexesEscherichia coliGeneticsmedicineFormateAnaerobiosisMolecular BiologyEscherichia coliMixed acid fermentationAlcohol dehydrogenaseNitratesEthanolEthanolEscherichia coli ProteinsAlcohol DehydrogenaseGene Expression Regulation BacterialGeneral MedicineAldehyde OxidoreductasesAerobiosisArtificial Gene FusionOxygenRepressor ProteinsLac OperonchemistryBiochemistryFermentationLactatesbiology.proteinFermentationOxidoreductasesBacterial Outer Membrane ProteinsArchives of Microbiology
researchProduct

Membrane Bioreactors for wastewater reuse: Respirometric assessment of biomass activity during a two year survey

2018

Abstract Stricter effluent limits, water shortage conditions, land availability requires today even more the needs of advanced wastewater treatments. Attractive solutions come from membrane bioreactors (MBR), Integrated Fixed Film Activated Sludge (IFAS) or combinations (i.e., IFAS-MBRs). One crucial aspect for the applicability of this overall new technology, compared to the conventional activated sludge systems, is the lack of knowledge for design and manage (e.g., kinetic constants, optimal operative conditions etc.). In view of the above frame, the aim of the present study was to assess the kinetic and stoichiometric parameters of bacterial species in MBRs by means of respirometric tech…

Kinetic and stoichiometric parameterIntegrated fixed-film activated sludge-membrane bioreactorStrategy and Management0208 environmental biotechnologyBiomass02 engineering and technology010501 environmental sciencesMembrane bioreactor01 natural sciencesIndustrial and Manufacturing EngineeringBioreactorOrganic matterEffluent0105 earth and related environmental sciencesGeneral Environmental Sciencechemistry.chemical_classificationMathematical modelling2300Settore ICAR/03 - Ingegneria Sanitaria-AmbientaleRenewable Energy Sustainability and the EnvironmentBuilding and ConstructionRespirometryPulp and paper industry020801 environmental engineeringStrategy and Management1409 Tourism Leisure and Hospitality ManagementActivated sludgechemistryWastewaterEnvironmental scienceMembrane bioreactorNitrification
researchProduct

Membrane bioreactors sludge: From production to disposal

2020

Abstract This chapter reviews the MBR activated sludge from production to disposal. Starting from sludge characterization, the chapter first presents the features of MBR sludge (morphology and EPS chemical composition), also in terms of differences with the activated sludge from conventional activated sludge plants. Sludge dewaterability is then discussed, focusing on the differences between aerobically and anaerobically digested sludge. An analysis of the costs related to MBR sludge treatment and disposal also is presented in order to provide a framework for a sustainable MBR sludge management.

MBRActivated sludgeSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSludge disposalSludge minimization strategiesBioreactorEnvironmental scienceSewage sludge treatmentPulp and paper industrySludge productionActivated sludge dewaterability
researchProduct

Mass transfer and hydrodynamic characteristics of unbaffled stirred bio-reactors: Influence of impeller design

2014

Abstract Unbaffled stirred tanks are increasingly recognized as a viable alternative to common baffled tanks for a range of processes where the presence of baffles is undesirable for some reason. For instance, in the case of shear sensitive cell cultivation (e.g. human cells), unbaffled tanks have been recently found to be able to provide sufficient mass transfer through the free surface vortex. As a consequence the need for bubble formation and subsequent bursting, along with relevant cells damage, is conveniently avoided. In this work the influence of impeller geometry on mass transfer performance and power demand of an unbaffled stirred vessel operating both in sub-critical conditions (t…

Mass transfer coefficientEngineeringEnvironmental EngineeringMass transfer coefficientbusiness.industrySettore ING-IND/25 - Impianti ChimiciMIXINGBiomedical EngineeringMixing (process engineering)Mechanical engineeringBioengineeringBaffleMechanicsMultiphase bioreactorVortexMixing Multiphase reactors Unbaffled tanks Mass transfer coefficient kLa Bioreactors Animal cell cultureImpellerFree surfaceMass transferLiquid bubblebusinessBiotechnologyAnimal cell culture
researchProduct

Simplified dynamic pressure method for kLa measurement in aerated bioreactors

2010

Abstract A simplified version of the dynamic pressure method for measuring mass-transfer coefficients in gas–liquid systems is proposed. With this method oxygen concentration in the liquid phase is monitored after a sudden change of total pressure is applied to the system. With respect to the original technique introduced by Linek [14] the simplified version here proposed greatly simplifies the data treatment, yet resulting in good accuracy for most practical purposes. In practice, with the help of a simple mathematical model, it is found that the dynamic oxygen concentration response, when plotted as residual driving force versus time in a semi-log diagram, should be expected to finally se…

Mass transfer coefficientEnvironmental EngineeringChemistrySettore ING-IND/25 - Impianti ChimiciBiomedical EngineeringContinuous stirred-tank reactorBioengineeringMechanicsResidualMultiphase bioreactorPower lawGas-liquid mass transferGas–liquid mass transferOxygen transferkLaControl theoryMass transferLimiting oxygen concentrationDynamic pressureStirred vesselsTotal pressureBiotechnologyDynamic modelling
researchProduct

Unbaffled, Stirred Bioreactors for Animal Cell Cultivation

2017

One of the main features of animal cell bioreactors is that the cultured cells lack a strong membrane and are therefore more prone to shear damage. It is widely accepted that animal cell damage in aerated bioreactors is mainly related to burst bubbles at the air–liquid interface. A viable alternative to sparged bioreactors, aimed at minimizing cell damage, may be represented by uncovered, unbaffled, stirred tanks, which are able to provide sufficient mass transfer through the deep free surface vortex that takes place under agitation. As a consequence the need for bubble formation and subsequent bursting accompanied by cell damage is conveniently avoided. In this chapter, mass transfer perfo…

Mass transfer coefficientMass transfer coefficientMaterials scienceSettore ING-IND/25 - Impianti ChimiciMixing timeBioreactortechnology industry and agricultureMixing (process engineering)Mechanical engineeringMechanicsequipment and suppliesmedicine.diseaseImpellerkLaUnbaffled tanksMixingFree surfaceMass transferMultiphase reactorBioreactormedicineFree surface shapeLiquid bubbleCell damageAnimal cell culture
researchProduct

A Brief Review on the Resistance-in-Series Model in Membrane Bioreactors (MBRs)

2019

The cake layer deposited on the membrane modules of membrane bioreactors (MBRs), especially under a submerged configuration, represents a relevant and fundamental mechanism deeply influencing the development of membrane fouling. It negatively affects the total resistance to filtration, while exerting a positive effect as a “pre-filter„ promoting the “dynamic membrane„ that protects the physical membrane from internal fouling. These two opposite phenomena should be properly managed, where the submerged membranes are usually subjected to a periodical cake layer removal through ordinary (permeate backwashing and air scouring) and/or irregular cleaning actions (manual ph…

Materials scienceBackwashingFiltration and SeparationContext (language use)02 engineering and technologyReview010501 environmental scienceslcsh:Chemical technology01 natural scienceslaw.inventionMBRlawRIS modelBioreactorChemical Engineering (miscellaneous)lcsh:TP1-1185lcsh:Chemical engineeringProcess engineeringFiltration0105 earth and related environmental sciencespore blockingFoulingSettore ICAR/03 - Ingegneria Sanitaria-Ambientalebusiness.industryProcess Chemistry and TechnologyMembrane foulinglcsh:TP155-156021001 nanoscience & nanotechnologyphysical cleaningcake depositionMembranereversible and irreversible foulingLayer removal0210 nano-technologybusinessMembranes
researchProduct