Search results for "Bismuth"

The effects of thermal treatment on structural, morphological and optical properties of electrochemically deposited Bi2S3 thin films

2017

Abstract Thin films of bismuth sulfide (Bi 2 S 3 ) have been electrochemically deposited on indium–doped tin oxide substrates from aqueous solutions of Bi(NO 3 ) 3 , ethylene diamine tetraacetic acid (EDTA) and Na 2 S 2 O 3 . The structural properties of the films were characterized using X–ray diffraction and high–resolution transmission electron microscopy analyses. The film crystallizes in an orthorhombic structure of Bi 2 S 3 along with metallic bismuth. Thermal annealing of the prepared film in sulfur atmosphere improves its crystallinity and cohesion. The band gap values of the deposited film before and after annealing at 400 °C were found to be 1.28 and 1.33 eV, respectively.

A comparative study on the compatibility of liquid lead–gold eutectic and liquid lead–bismuth eutectic with T91 and SS 316LN steels

2012

Abstract Liquid lead–gold eutectic (LGE) is considered as a potential target material for high power spallation sources. In the present work, the corrosion effects of LGE on T91 and SS 316LN steels have been investigated in comparison with that of liquid lead–bismuth eutectic (LBE) under the same testing conditions. Two tests were conducted at 400 °C for 1800 h and at 450 °C for 1300 h, in which specimens of the two steels were exposed to 1 m/s flowing LGE and LBE. Surface inspections showed that the specimens underwent a mixed corrosion mode of dissolution and oxidation. The results obtained from the SS 316LN specimens are very interesting. Firstly, EDX (electron energy dispersion X-ray sp…

Electromechanical properties of Na 0.5 Bi 0.5 TiO 3 -SrTiO 3 -PbTiO 3 solid solutions

2018

Abstract Thorough studies of electric field-induced strain are presented in 0.4Na1/2Bi1/2TiO3-(0.6-x)SrTiO3-xPbTiO3 (NBT-ST-PT) ternary solid solutions. The increase of concentration of lead x induces crossover from relaxor to ferroelectric. Strain in a relaxor state can be described by electrostrictive behavior. The electrostrictive coefficients correspond to other well-known relaxor ferroelectrics. The concentration region with a stable ferroelectric phase revealed that the polarization dependence of strain does not exhibit nonlinearity, although they are inherent to the electric field dependence of strain. In this case, electric field dependence of strain is described in terms of the Ray…

One-Pot, Clean Synthesis of Vanillic Acid from Ferulic Acid

2016

Ferulic acid dissolved in water is selectively oxidized to vanillic acid in high yield (≈60 %) under remarkably mild and green conditions, namely at room temperature with air as primary oxidant, over a catalytic amount of nanostructured Bi2WO6. The process is general and opens the route to the selective oxidation of natural substances into derivatives of significant applicative relevance.

Automated Diffraction Tomography for the Structure Elucidation of Twinned, Sub-micrometer Crystals of a Highly Porous, Catalytically Active Bismuth M…

2012

Physical evaluation of a new pulp capping material developed from portland cement

2016

Background This study examined the effects of addition of 10% and 25% by weight calcium hydroxide on the physicochemical properties of Portland cement associated with 20% bismuth oxide in order to develop a new pulp capping material. Material and Methods The solubility, pH value, setting time, compressive strength, and push out bond strength of modified Portland were evaluated and compared to those of mineral trioxide aggregate (MTA) and Portland cement containing 20% bismuth oxide. Results The statistical analysis was performed with ANOVA and Duncan’s post-hoc test. The results show that the strength properties and push out bond strength of Portland cement were adversely affected by additi…

The Bi sulfates from the Alfenza Mine, Crodo, Italy: An automatic electron diffraction tomography (ADT) study

2014

We report about three bismuth sulfates from mineralized quartz dikes from Alfenza (Crodo, Italy), two new phases and a rare mineral, cannonite, all growing on bismuthinite. The first new phase occurs as white, "hortensia-like" aggregates of pseudo-hexagonal platelets, with perfect basal cleavage, similar to 20 mu m wide and few micrometers thick. The approximate composition is Bi2O2(SO4), and cell parameters and symmetry, as determined by automatic diffraction tomography, are a = 22.0(4), b = 16.7(3), c = 15.9(3) angstrom, beta = 102.9(5)degrees, space group Pc or P2/c. A major stacking disorder is detected by HR-SEM images and electron diffraction data.The second new phase was detected onl…

A radiometric and petrographic approach to risk assessment at Alte Madonie Mounts region (Sicily, Italy)

2013

The main goal of this work was to assess the radiological hazard at Alte Madonie Mounts region (north-central Sicily, Italy) in response to rumours of an increase in the incidence of cancer in this area. A correlation between the natural radionuclide contents and the petrographic features of the soil and rock samples was also evaluated. A total of 41 samples of selected soils and rocks were collected, powdered, dried and sealed in 'Marinelli' beakers for 20 d prior to measurement to ensure that a radioactive equilibrium between (226)Ra and (214)Bi had been reached. A gamma-ray spectrometer was used to quantify the radioactivity concentrations. To determine (238)U and (232)Th activities, the…

Determination of antimony, arsenic, bismuth and copper by inductively coupled plasma atomic emission spectrometry in the electrorefining of copper

1996

Inductively coupled plasma atomic emissionspectrometry (ICP-AES) has been applied as a rapid and routine method for the analysis of process electrolytes in the electrorefining of copper. Antimony, arsenic, bismuth and copper have been selected as major electrolyte constituents. For these elements profound statistical studies of spectral and interelement effects have been carried out. For As, Bi and Sb two analyte wavelengths have been selected, and for Cu one relatively insensitive analyte line has been chosen due to the high Cu concentration in samples. Best analytical lines were: As at 193.759 nm, Bi at 306.772 nm, Sb at 206.833 nm and Cu at 216.953 nm. Multiple linear regression proved t…

Relationships between the Impedance of Oxide Scales on Martensitic and Austenitic Steels and Corrosion Rate in Liquid Lead-Bismuth Eutectic

2004

Abstract The impedance properties (resistance and capacitance) of oxide scales on the martensitic/ferritic steel HT-9 and austenitic stainless steel Type 316L (UNS S31603) were examined during immersion in lead-bismuth eutectic (LBE) using a technique similar to electrochemical impedance spectroscopy. These scales were created by preoxidizing the samples in an air/water vapor environment at 800°C for various times prior to immersion in LBE. Calculation of oxide conductivity for samples immersed in LBE at 200°C for 200 h yielded σHT9 ≈ 4 × 10−7 (Ω × cm)−1 while σ316 ≈ 3 × 10−8 (Ω × cm)−1. The influence of temperature alone gave the anticipated Arrhenius behavior with Ea equal to 0.12 eV, whi…