Search results for "CAVI"
showing 10 items of 827 documents
Tunable dual-wavelength operation of an all- fiber thulium-doped fiber laser based on tunable fiber Bragg gratings
2018
Tunable dual-wavelength emission of a Tm-doped fiber laser based on two fiber Bragg gratings (FBGs) is experimentally demonstrated. By using two FBGs with central wavelengths at 2069.30 and 2069.44 nm, stable dual-wavelength laser generation in the 2 ?m wavelength region is achieved by adjusting the differential loss of the two wavelengths in the laser cavity. Strain applied on the FBG allows independent tuning of the simultaneously generated wavelengths with separation between the laser lines in a range from 0.54 to 9 nm. The laser has output power fluctuations less than 0.093% for an output power of 77.3 mW.
Electrochemical Fabrication and Physicochemical Characterization of Metal/High-k Insulating Oxide/Polymer/Electrolyte Junctions
2014
Photoelectrochemical polymerization of poly(3,4-ethylenedioxythiophene), PEDOT, was successfully realized on anodic film grown to 50 V on magnetron sputtered Ti-6 atom % Si alloys. Scanning electron microscopy allowed us to evidence formation of compact and uniform polymer layers on the oxide surface. Photoelectrochemical and impedance measurements showed that photopolymerization allows one to grow PEDOT in its conducting state, while a strong cathodic polarization is necessary to bring the polymer in its p-type semiconducting state. Information on the optical and electrical properties of metal/oxide/polymer/electrolyte junctions proves that PEDOT has promising performance as an electrolyte…
Tunable coaxial cavity resonator for linear and nonlinear microwave characterization of superconducting wires
2011
We discuss experimental results obtained using a tunable cylindrical coaxial cavity constituted by an outer Cu cylinder and an inner Pb-BSCCO wire. We have used this device for investigating the microwave response of the superconducting wire, both in the linear and nonlinear regimes. In particular, by tuning the different modes of the cavity to make them resonant at exactly harmonic frequencies, we have detected the power emitted by the superconducting inner wire at the second- and third-harmonic frequency of the driving field. The results obtained in the nonlinear regime, whether for the microwave surface impedance or the harmonic emission, are qualitatively accounted for considering inter…
In-situ electrochemical atomic force microscopy study of aging of magnetron sputtered Pt-Co nanoalloy thin films during accelerated degradation test
2016
Abstract A Pt-Co nanoalloy thin film catalyst was prepared by using simultaneous magnetron sputtering of Pt and Co. The catalyst was characterized during accelerated degradation test using in-situ electrochemical atomic force microscopy complemented with ex-situ techniques such as energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and synchrotron radiation photoelectron spectroscopy. The combined results gave the full step-by-step picture of the catalyst behavior during the aging test.
Structural characterization of mixed Ta–Re oxide films
2006
Thin films of mixed Ta and Re oxides have been produced by reactive dc magnetron co-sputtering of pure Ta and Re metal targets in Ar–O2 atmosphere. The structural evolution of these films has been studied as a function of the composition, starting from a pure tantalum oxide film up to about 82% rhenium content. The composition and the structure of the films have been investigated by using X-ray diffraction and micro-Raman spectroscopy. For low Re content (20%), islands of a well crystallized phase, based on ReO4 groups, appear in the films still composed by pure amorphous tantalum oxide, while a mixed disordered solid phase is found for the highest Re concentration (82%). © 2006 Elsevier B.…
Frequency dependence of the microwave surface resistance of MgB2 by coaxial cavity resonator
2014
Abstract We report on the microwave (mw) properties of a cylindrical MgB2 rod prepared by the reactive liquid Mg infiltration technology. The MgB2 rod, 94.3 mm long, is used as inner conductor of a coaxial cavity having a Cu tube as external conductor. By analyzing the resonance curves of the cavity in the different resonant modes and at different temperatures, we have determined the temperature dependence of the mw surface resistance, R s , of the MgB2 material, at fixed frequencies, and the frequency dependence of R s , at fixed temperatures. Our results show that the R s ( f ) curves follow a f n law, where n decreases on increasing the temperature, starting from n ≈ 2 , at T = 4.2 K , d…
The Single Molecule Probe: Nanoscale Vectorial Mapping of Photonic Mode Density in a Metal Nanocavity
2009
International audience; We use superresolution single-molecule polarization and lifetime imaging to probe the local density of states (LDOS) in a metal nanocavity. Determination of the orientation of the molecular transition dipole allows us to retrieve the different LDOS behavior for parallel and perpendicular orientations with respect to the metal interfaces. For the perpendicular orientation, a strong lifetime reduction is observed for distances up to 150 nm from the cavity edge due to coupling to surface plasmon polariton modes in the metal. Contrarily, for the parallel orientation we observe lifetime variations resulting from coupling to characteristic λ/2 cavity modes. Our results are…
Ultrasound-assisted bleaching: Mathematical and 3D computational fluid dynamics simulation of ultrasound parameters on microbubble formation and cavi…
2019
Abstract The implementation of ultrasound-assisted bleaching (UAB) is gaining interest in commercial oil refining, as an alternative to the current bleaching procedure (BP), because this technique has several advantages compared to the conventional BP. The mathematical and 3D computational fluid dynamics (CFD) simulation of the influence of ultrasound power, frequency and temperature for predicting microbubble formation and heat transfer in the ultrasonic treatment of soybean oil was assessed in order to optimize the UAB process. The fluctuation frequency and wave speed showed opposite effects on system response to the imposed pressure pulse. As the bubble radius shrinks to zero (after bubb…
Repassivation of the damage generated by cavitation on UNS N08031 in a LiBr solution by means of electrochemical techniques and Confocal Laser Scanni…
2010
Abstract The objective of this work is to study the influence of cavitation on the corrosion behaviour of Alloy 31, a highly-alloyed austenitic stainless steel (UNS N08031), in a LiBr heavy brine solution (992 g/L) at 25 °C. The presence of cavitation shifted the OCP value towards the active direction by 708 mVAg/AgCl, increased anodic current densities and passivation current density, ip, and reduced the pitting potential, Ep. Repassivation behaviour of Alloy 31 has been investigated by using potentiostatic tests at different potentials. The current density transient obtained after interrupting cavitation was used to obtain the repassivation index, n, provided by the slope of the log i(t) …
Tunable phonon-cavity coupling in graphene membranes
2016
A major achievement of the past decade has been the realization of macroscopic quantum systems by exploiting the interactions between optical cavities and mechanical resonators. In these systems, phonons are coherently annihilated or created in exchange for photons. Similar phenomena have recently been observed through phonon-cavity coupling - energy exchange between the modes of a single system mediated by intrinsic material nonlinearity. This has so far been demonstrated primarily for bulk crystalline, high-quality-factor (Q > 105) mechanical systems operated at cryogenic temperatures. Here, we propose graphene as an ideal candidate for the study of such nonlinear mechanics. The large …