Search results for "COPPER"
showing 10 items of 3029 documents
A procedure to evaluate the seven parameters of the two-diode model for photovoltaic modules
2019
Abstract The paper presents an analytical procedure to calculate the seven parameters of the two-diode model of photovoltaic (PV) panels for any value of the solar irradiance and cell temperature. Six parameters (the photocurrent, the diode reverse saturation currents, the quality factor of the first diode and the series and shunt resistances), are evaluated by solving the equations related to the properties of the main points of the current-voltage (I-V) characteristics. The further information, necessary to calculate the entire set of seven truly independent parameters, is based on two conditions that have to be simultaneously satisfied: 1) the exclusion of negative values of the model pa…
An accurate one-diode model suited to represent the current-voltage characteristics of crystalline and thin-film photovoltaic modules
2020
Abstract In this paper a new one-diode model, conceived in order to be used to represent the current-voltage curves of both crystalline and thin-film photovoltaic modules, is presented. The model parameters are calculated from the information contained in the datasheets issued by manufactures by means of simple iterative procedures that do not require the assumption of simplifying hypotheses. Some innovative relations describing the dependence of the parameters from the solar irradiance and cell temperature are adopted in order to permit the model to reliably simulate the electrical behaviour of photovoltaic devices operating in real conditions. The ability of the model to calculate the cur…
In vitro fibrillogenesis of the amyloid beta 1-42 peptide: cholesterol potentiation and aspirin inhibition.
2002
Understanding the formation of extracellular amyloid neurofibrillar bundles/senile plaques and their role in the development of Alzheimer's disease is of considerable interest to neuroscientists and clinicians. Major components of the extracellular neurofibrillar bundles are polymerized amyloid beta (Abeta) peptides (1-40), (1-42) and (1-43), derived in vivo from the soluble amyloid precursor protein (sAPP) by proteolytic (beta- and gamma-secretase) cleavage. The Abeta(1-42) peptide is widely considered to be of greatest significance in relation to the pathogenesis of Alzheimer's disease. A well-defined ultrastructural characteristic within Alzheimer dense plaques is the presence of helical…
Structural analysis of copper(I) interaction with amyloid β peptide
2019
Abstract The N-terminal fragment of Aβ (β = beta) peptide is able to bind essential transition metal ions like, copper, zinc and iron. Metal binding usually occurs via the imidazole nitrogens of the three His residues which play a key role in the coordination chemistry. Among all the investigated systems, the interaction between copper and Amyloid β assume a biological relevance because of the interplay between the two copper oxidation states, Cu(II) and Cu(I), and their involvement in redox reactions. Both copper ions share the ability to bind Amyloid β. A huge number of investigations have demonstrated that Cu(II) anchors to the N-terminal amino and His6, His13/14 imidazole groups, while …
High-pressure flow-injection assembly. Indirect determination of glycine by atomic absorption spectrometry.
1991
A procedure for the determination of glycine is described. The method is based on the reaction of the analyte with finely powdered, solid copper(II) carbonate in a continuous-flow assembly. The optimum experimental conditions of pH, temperature, sample volume, flow-rate, column length and internal diameter, and the linear range of calibration, were studied. Interference from foreign substances that accompany this amino acid in pharmaceutical formulations was studied, and the method was applied to the determination of glycine.
Determination of antimony, arsenic, bismuth and copper by inductively coupled plasma atomic emission spectrometry in the electrorefining of copper
1996
Inductively coupled plasma atomic emissionspectrometry (ICP-AES) has been applied as a rapid and routine method for the analysis of process electrolytes in the electrorefining of copper. Antimony, arsenic, bismuth and copper have been selected as major electrolyte constituents. For these elements profound statistical studies of spectral and interelement effects have been carried out. For As, Bi and Sb two analyte wavelengths have been selected, and for Cu one relatively insensitive analyte line has been chosen due to the high Cu concentration in samples. Best analytical lines were: As at 193.759 nm, Bi at 306.772 nm, Sb at 206.833 nm and Cu at 216.953 nm. Multiple linear regression proved t…
Cyclam-functionalized silica-modified electrodes for selective determination of Cu(II)
2009
Cyclam derivatives have been grafted via 1, 2 or 4 silylated arms to the surface of mesoporous silica and the resulting materials have been incorporated into carbon paste electrodes and applied to the preconcentration electroanalysis of Cu(II). Sensitive and selective detection of the target analyte was achieved owing to the attractive binding properties of this macrocyclic ligand towards Cu(II) species. Various parameters likely to affect the preconcentration and detection steps have been studied, including pH of the accumulation medium, composition of the detection solution, structure and composition of the adsorbent, accumulation time, or presence of potentially interfering species. In p…
Optimization of operating conditions of axially and radially viewed plasmas for the determination of trace element concentrations from ultrasound-ass…
2006
Abstract The method of ultrasound-assisted extraction followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of trace element concentrations (arsenic, copper, lead, antimony, and zinc) in shooting range areas was optimized. Optimization was achieved not only on the basis of the analysis of appropriate standard reference materials but also on that of 31 synthetic mixtures of matrix and analyte elements (aluminum, antimony, arsenic, calcium, copper, lead, iron, manganese, silicon, and zinc), in five concentrations. All the measurements were performed in robust plasma conditions which were tested by measuring the Mg II 280.270 nm/Mg I 285.213 …
Combined Adsorption/Photocatalytic dye removal by copper-titania-fly ash composite
2020
Abstract Achieving both photocatalytic efficiency and adsorption capacity is essential to produce a highly efficient photocatalyst. This study fabricated a new photocatalyst by combining copper (Cu) doped titanium dioxide (TiO2) with fly ash (FA). The photocatalysts were synthesized using mild acid (acid-FA/Cu/TiO2), base (base-FA/Cu/TiO2), and deionized water (rFA/Cu/TiO2) activated FA. EDX confirmed the inclusion of Cu in both Cu/TiO2 and FA/Cu/TiO2 composites. XRD analysis indicated the presence of the anatase form of TiO2 after Cu doping and incorporation into modified FA. All three FA/Cu/TiO2 composites demonstrated high absorption (UV and visible region) compared to their TiO2 and Cu/…