Search results for "CORROSION"
showing 10 items of 456 documents
Inhibition of Cor-Ten steel corrosion by “green” extracts of Brassica campestris
2018
Abstract Extract of Brassica campestris was tested as potential corrosion inhibitor for Cor-Ten steel in NaCl and acidic solutions, simulating a marine and an urban-industrial environment, respectively. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were performed both in absence and in presence of the extract at room temperature. The surface chemical analysis was investigated by X-ray Photoemission Spectroscopy (XPS), before and after corrosion. Electrochemical results demonstrated that a very small concentration of Brassica campestris extracts can inhibit Cor-Ten corrosion in NaCl solution (inhibition efficiency of 80–84%) better than in acidic solutions. Su…
Effects of anodizing surface treatment on the mechanical strength of aluminum alloy 5083 to fibre reinforced composites adhesive joints
2021
Abstract In this study, the anodizing process based on the use of tartaric sulfuric acid solution (TSA) was carried out on metal substrate to evaluate for the first time its effect on the adhesion strength and corrosion resistance of aluminium alloy (i.e., AA5083) to fibre (i.e., basalt or glass) reinforced composite adhesive joints for nautical applications. Furthermore, some TSA anodized samples were soaked in a NaOH solution to investigate the influence of this post-immersion step on the joint performances. With the aim to improve the fibre-matrix adhesion in the composite substrate thus further increasing the overall mechanical response of the joint, glass and basalt fibres were treated…
Self-Healing Properties of Bioinspired Amorphous CaCO3/Polyphosphate-Supplemented Cement
2020
There is a strong interest in cement additives that are able to prevent or mitigate the adverse effects of cracks in concrete that cause corrosion of the reinforcement. Inorganic polyphosphate (polyP), a natural polymer that is synthesized by bacteria, even those on cement/concrete, can increase the resistance of concrete to progressive damage from micro-cracking. Here we use a novel bioinspired strategy based on polyP-stabilized amorphous calcium carbonate (ACC) to give this material self-healing properties. Portland cement was supplemented with ACC nanoparticles which were stabilized with 10% (w/w) Na&ndash
Double Step Electrochemical Process for the Deposition of Superhydrophobic Coatings for Enhanced Corrosion Resistance
2021
Superhydrophobic surface on anodized AA5083 sample was obtained by an electrochemical process. Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy analyses revealed the hierarchical structure of the coating and the presence of manganese stearate. These features were crucial for the coating superhydrophobicity, demonstrated by a measured contact angle of ~ 163° and its self-cleaning ability. Electrochemical characterization in an aqueous solution mimicking seawater proved an enhanced corrosion resistance due to the superhydrophobic coating with respect to anodized AA5083 sample that also lasted after 20 immersion days in Cl- containing electrolyte.
Influence of the Chemical Dissolution of MnS Inclusions on the Electrochemical Behavior of Stainless Steels
2005
Immersion of stainless steel containing a well-controlled density of MnS inclusions in 1 M NaCI, pH 3 leads to the chemical dissolution of these heterogeneities. This process was studied using in situ atomic force microscopy and the dissolution rate of MnS inclusions was estimated between 0.01 and 0.19 μm 3 /min. The effects of MnS dissolution on the chemical composition and the local electrochemical behavior of the specimen surface were investigated using secondary ion mass spectroscopy, X-ray photoemission spectroscopy, and the electrochemical microcell technique. It was shown that stable CrS and unstable FeSO 4 were formed. The size of the areas around MnS inclusions affected by the pres…
Assessment of the electrochemical behaviour of Nickel-Titanium-based orthodontic wires: Effect of some natural corrosion inhibitors in comparison wit…
2019
Background The aim of this study is to assess the corrosion resistance behaviour of Nickel-Titanium-based orthodontic wires (NiTi) in different concentrations of Sodium Fluoride (NaF) and the corrosion's inhibitory effect of the extracts of some medicinal plants (essential oils, hydrosols and extract). Material and methods In this study we used NiTi (3M) and CuNiTi (ORMCO, 35°C, California) orthodontic wires. The following electrolytes were prepared: Lactate Ringer solution with additions of 0.1%, 0.5% or 1% of Sodium Fluoride and the extracts of different plants: Artemisia, Syzygium aromaticum (Clove) and Celtis australis. Corrosion resistance was studied using anodic potentiodynamic polar…
Salt spray fog ageing of hybrid composite/metal rivet joints for automotive applications
2017
Abstract The present experimental investigation aims to investigate the effect of salt-fog exposition on the mechanical behaviour of composite/metal riveted joints. To this aim, two kinds of joint were exposed to salt-fog environmental conditions according to ASTM B117 standard, for fifteen weeks. In particular, two composite laminates (i.e. glass fibre and carbon fibre/epoxy composites) were used as composite substrate joined with the metal substrate (i.e. aluminium alloy Al 6060). Single-lap shear tests were carried out in order to evaluate the evolution of the mechanical performances and the damage mechanisms of the riveted joints during the ageing exposition. The results evidence that t…
Influence of the microstructure on the corrosion behaviour of low-carbon martensitic stainless steel after tempering treatment
2014
Abstract The microstructure of grade X4CrNiMo16.5.1 stainless steel was studied at different scales. The chemical composition of the native passive film formed on the different phases was then determined at the microscale. The degree of homogeneity of the native passive film is discussed. Subsequently, the susceptibility to pitting corrosion of X4CrNiMo16.5.1 was quantified using the electrochemical microcell technique. The nature of precursor sites and the morphology of pits were investigated by combining scanning electron microscopy with Electron BackScatter Diffraction and potentiostatic pulse tests. The role of the microstructure and the cold-worked layer generated by polishing in pitti…
Effects of pulse current mode on plasma electrolytic oxidation of 7075 Al in Na2WO4 containing solution: From unipolar to soft-sparking regime
2018
Abstract Plasma electrolytic oxidation coatings were produced on 7075 Al alloy in a silicate based solution containing sodium tungstate using unipolar, usual bipolar and soft-sparking bipolar pulsed current regimes. X-ray diffraction proved that the coatings contain gamma alumina and metallic tungsten. EDS results showed that the tungsten content decreases with increasing the negative half cycle. Scanning electron microscopy showed that the pancake and volcano-like were dominant morphologies for the coatings produced by the unipolar and bipolar current regimes, respectively. Under unipolar current regime, a band of large pores is observed at the metal/coating interface, while they became di…
Corrosion behaviour of heavily deformed pearlitic and brass-coated pearlitic steels in sodium chloride solutions
2014
Abstract The influence of plastic deformation and galvanic coupling on the microstructure and corrosion behaviour of pearlitic steel and brass-coated pearlitic steel was investigated in sodium chloride solution at 25 °C. Microstructural changes were quantified using scanning electron microscopy coupled with EBSD. Chemical and electrochemical modifications were evaluated using XPS, ZRA, the electrochemical microcell technique and the weight loss method. From these experiments, the influence of microstructural changes on the electrochemical parameters and the corrosion rate was discussed.