Search results for "Calcination"
showing 10 items of 112 documents
Synthesis of high-surface area CeO2 through silica xerogel template: influence of cerium salt precursor”;
2010
Abstract Ceria nanosized oxides with high surface area were synthesized by means of a templating approach, using a porous silica xerogel with surface area as high as 718 m2/g. After impregnation of the silica template with the cerium salt solution and further calcination at 600 °C, the final ceria oxide was recovered by dissolving the silica framework in NaOH solution. The effect of cerium counteranion, nitrate or chloride, on the textural and reduction properties of the ceria oxide was examined. Characterizations by BET and pore size distribution, XRD, TPR and SEM/EDX techniques were performed. The silica xerogel templated approach resulted in the preparation of ceria with surface area of …
Hierarchically Structured Titania Films Prepared by Polymer/Colloidal Templating
2010
Hierarchically structured titania films for application in hybrid solar cells are prepared by combining microsphere templating and sol-gel chemistry with an amphiphilic diblock copolymer as a structure-directing agent. The films have a functional structure on three size scales: (1) on the micrometer scale a holelike structure for reduction of light reflection, (2) on an intermediate scale macropores for surface roughening and improved infiltration of a hole transport material, and (3) on a nanometer scale a mesoporous structure for charge generation. Poly(dimethyl siloxane)-block-methyl methacrylate poly(ethylene oxide) (PDMS-b-MA(PEO)) is used as a structure-directing agent for the prepara…
Photoelectrocatalytic selective oxidation of 4-methoxybenzyl alcohol in water by TiO2 supported on titanium anodes
2013
The photoelectrocatalytic partial oxidation of 4-methoxybenzyl alcohol in aqueous solution irradiated by near-UV light was carried out in a three-electrode batch reactor. TiO2 films were either deposited by dip-coating of a TiO2 sol onto a Ti foil and subsequent calcination or generated on Ti plates by thermal oxidation in air at 400-700 degrees C. The effects of the anode preparation method and bias potential values on conversion and selectivity to the corresponding aldehyde were investigated. The photoelectrocatalytic results were compared with the photocatalytic and electrocatalytic ones. The results indicated that no reaction occurred during the electrocatalytic experiments, whereas the…
Influence of preparation conditions of nano-crystalline ceria catalysts on the total oxidation of naphthalene, a model polycyclic aromatic hydrocarbon
2007
Abstract Nano-crystalline ceria catalysts prepared by homogeneous precipitation with urea were tested for the total oxidation of naphthalene, a model polycyclic aromatic hydrocarbon (PAH). Systematic variation of preparation conditions, including calcination temperature, calcination time and aging time, resulted in differences in surface area, reducibility, morphology and crystallite size of the CeO 2 catalyst and hence differences in catalytic performance. A combination of high surface area, small crystallite size and high oxygen defect concentration was found to favor the efficiency of the ceria catalysts for the total oxidation of naphthalene. Optimum preparation conditions for this stud…
Photocatalytic oxidation of trans-ferulic acid to vanillin on TiO2 and WO3-loaded TiO2 catalysts
2015
Abstract The photocatalytic oxidation of trans-ferulic acid to vanillin in water has been studied by using various TiO2 and WO3-loaded TiO2 samples as catalysts. Different values of selectivity were obtained depending on the physico-chemical properties of the single samples and a vanillin selectivity of 10% was reached in the presence of the commercial TiO2 Merck. Higher selectivity values were obtained by impregnation of TiO2 with H2WO4 followed by calcination. The increased production of vanillin exhibited by the obtained WO3-loaded TiO2 powders was attributed to a reduced further oxidation of the aldehyde caused by the presence of the practically inactive tungsten trioxide hydrate on the…
Influence of Acidic Support in Metallocene Catalysts for Ethylene Polymerization
2001
Abstract We studied a ZSM-5 zeolite as metallocene support for ethylene polymerization. We transformed the Na-ZSM-5 into H-ZSM-5. After the cation exchange, the zeolite was calcined at three different temperatures. Characterization of the material indicated that by means of the calcination procedure it is possible to produce dealuminization with an increase in extraframework aluminum (EFAL). We prepared zirconocene-supported catalysts on zeolitic supports using two preparation methods. The higher activity was observed with the zirconocene supported on ZSM-5 pretreated at 900°C. We think that the dealuminization process generates an increase in EFAL. This EFAL is responsible for the higher a…
Production of monodisperse uranium oxide particles and their characterization by scanning electron microscopy and secondary ion mass spectrometry
2000
Abstract Secondary ion mass spectrometry (SIMS) can be confidently used to measure uranium isotopic ratios in single particles. Dense particles of known isotopic composition and size allow the precision and the accuracy of the applied procedure to be estimated. These particles can be obtained by dissolving standard reference uranium materials, nebulizing the solution in droplets of proper diameter and collecting the particles after the desolvation and calcination of the droplets. A new instrumental set up, based on a commercial vibrating orifice aerosol generator to generate monodisperse droplets of the solutions from four uranium oxide reference materials, is described. The droplets were d…
The effect of gold addition on the catalytic performance of copper manganese oxide catalysts for the total oxidation of propane
2011
Mixed copper manganese oxide catalysts (Hopcalite) have been studied for the total oxidation of propane, as a model for hydrocarbon volatile organic compound emission control. Catalysts were prepared using coprecipitation with and without gold. Calcination temperature influenced the catalyst activity and those prepared at 300 °C were the most active. Characterization showed that the catalysts had a nanowire-type morphology, and for those containing gold it was present as metallic particles occluded within the nanowires. The incorporation of gold into the catalyst enhanced the activity for propane conversion, but the presence of gold did not noticeably enhance the light-off activity. Althou…
Pumice-Supported Nickel Catalysts
1997
A series of nickel catalysts supported on pumice was prepared by precipitation and impregnation techniques. The influence of the calcination and reduction temperatures on the structural properties such as lattice parameters and particle dimensions of the oxide precursors and of the reduced catalysts was investigated by X-ray diffraction measurements. The effect of structural changes on the catalytic activity in the hydrogenation of carbon monoxide has been evaluated. The turnover frequencies, as well as product distributions, are discussed in terms of the influence of the support properties and of its interaction with the metal. Changes of the C2+yield over CH4yield ratio versus nickel disp…
Surface Study of Pumice Supported Nickel Catalysts Used in the Hydrogenation of CO
1998
A series of pumice supported nickel catalysts used in the CO hydrogenation reaction were characterised by X-ray photoelectron spectroscopy. Qualitative and quantitative analysis of the XPS peaks have shown the effect of the calcination conditions on the chemical state of the nickel before hydrogenation and the particle size of the metal after reduction. Calcination at high temperature determined enrichment of sodium ions on the surface of the support and also on the metal particles. After exposure to the gas mixture CO/H2, formation of nickel carbides and other carbon species was checked. The correlation found between the surface atomic ratio Na/Si and the activity and selectivity of the ca…